The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Synergy of Porous Structure and Microstructure in Piezoresistive Material for High-Performance and Flexible Pressure Sensors
Open accessAbstract
A porous and microstructure piezoresistive material composed of polydimethylsiloxane (PDMS) and multiwalled carbon nanotubes (MWCNTs) was designed and prepared for a flexible and highly sensitive pressure sensor over a wide detection range. The microstructure was patterned on the surface of the partially cured PDMS/MWCNTs/NaCl mixture by imprinting a nonwoven fabric. After curing and dissolving the NaCl powders, the porous and surface microstructure PDMS/MWCNT film was obtained. Two PDMS/MWCNT films were stacked together and sandwiched between two copper foil electrodes, in which the two microstructure surfaces were in contact with the electrodes. Due to the synergistic effects of the combination of the porous structure and surface microstructure, the flexible sensor had highly sensitive response over a wide pressure range from 1 Pa to 100 kPa. Under the small pressure, the high sensitivity was achieved by the change in contact areas between the electrodes and the surface microstructures; at high pressure up to 100 kPa, the sensor retained its high sensitivity because of the porous structure of the piezoresistive PDMS/MWCNT material. Additionally, the sensor had fast response speed and good durability. The piezoresistive pressure sensors based on the porous and microstructure PDMS/MWCNTs were demonstrated in detection of sound, monitoring of human activities, and array mapping of the spatial pressure distribution.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A flexible and highly sensitive strain-gauge sensor using reversible interlocking of nanofibres
Pang, C., Lee, G.-Y., Kim, T.-I., Kim, S. M., Kim, H. N., Ahn, S.-H., & Suh, K.-Y. (2012) · Nature Materials · doi:10.1038/nmat3380 · Cited by 1,695
Pan, L., Chortos, A., Yu, G., Wang, Y., Isaacson, S., Allen, R., Shi, Y., Dauskardt, R., & Bao, Z. (2014) · Nature Communications · doi:10.1038/ncomms4002 · Cited by 1,519
Choong, C., Shim, M., Lee, B., Jeon, S., Ko, D., Kang, T., Bae, J., Lee, S. H., Byun, K., Im, J., et al. (2014) · Advanced Materials · doi:10.1002/adma.201305182 · Cited by 1,252
Yao, H., Ge, J., Wang, C., Wang, X., Hu, W., Zheng, Z., Ni, Y., & Yu, S. (2013) · Advanced Materials · doi:10.1002/adma.201303041 · Cited by 1,137
Recent progress in nanoimprint technology and its applications
Guo, L. J. (2004) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/37/11/r01 · Cited by 733
Flexible and Highly Sensitive Pressure Sensors Based on Bionic Hierarchical Structures
Jian, M., Xia, K., Wang, Q., Yin, Z., Wang, H., Wang, C., Xie, H., Zhang, M., & Zhang, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606066 · Cited by 657
Bae, G. Y., Pak, S. W., Kim, D., Lee, G., Kim, D. H., Chung, Y., & Cho, K. (2016) · Advanced Materials · doi:10.1002/adma.201600408 · Cited by 646
Tee, B. C. ‐., Chortos, A., Dunn, R. R., Schwartz, G., Eason, E., & Bao, Z. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400712 · Cited by 538
Lee, Y., Park, J., Cho, S., Shin, Y.-E., Lee, H., Kim, J., Myoung, J., Cho, S., Kang, S., Baig, C., et al. (2018) · ACS Nano · doi:10.1021/acsnano.8b01805 · Cited by 528
Wang, Y., Hao, J., Huang, Z., Zheng, G., Dai, K., Liu, C., & Shen, C. (2018) · Carbon · doi:10.1016/j.carbon.2017.10.034 · Cited by 497
Cited by
Soft Sensors and Actuators for Wearable Human–Machine Interfaces
Park, J., Lee, Y., Cho, S., Choe, A., Yeom, J., Ro, Y. G., Kim, J., Kang, D.-H., Lee, S., & Ko, H. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00356 · Cited by 272
Sharma, A., Ansari, M. Z., & Cho, C. (2022) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2022.113934 · Cited by 95
Li, X., Liu, Y., Ding, Y., Zhang, M., Lin, Z., Hao, Y., Li, Y., & Chang, J. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c01042 · Cited by 79
Self-citationZhang, M., Liu, S., Liu, S., Jia, G., Zhan, P., Liu, C., Shen, C., & Liu, H. (2025) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-024-01157-1 · Cited by 23
Metadata
- Authors
- Li, W., Jin, X., Han, X., Li, Y., Wang, W., Lin, T., & Zhu, Z.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-04-16
- Volume
- 13
- Issue
- 16
- Pages
- 19211-19220
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W3154930848
- Cited by
- 291
- References
- 46
- FWCI
- 12.67
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Synergy of Porous Structure and Microstructure in Piezoresistive Material for High-Performance and Flexible Pressure Sensors. https://app.cochat.ai/papers/10.1021/acsami.0c22938
- The paper
- Li, W., Jin, X., Han, X., Li, Y., Wang, W., Lin, T., & Zhu, Z. (2021). Synergy of Porous Structure and Microstructure in Piezoresistive Material for High-Performance and Flexible Pressure Sensors. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.0c22938
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.