Graphene Aerogels Decorated with α-FeOOH Nanoparticles for Efficient Adsorption of Arsenic from Contaminated Waters
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Arsenic (As) is the world's most hazardous chemical found in drinking water of many countries; therefore, there is an urgent need for the development of low-cost adsorbents for its removal. Here, we report a highly versatile and synthetic route for the preparation of a three-dimensional (3D) graphene-iron oxide nanoparticle aerogel composite for the efficient removal of As from contaminated water. This unique three-dimensional (3D) interconnected network was prepared from natural graphite rocks with a simple reaction, without the use of harsh chemicals, which combines with the exfoliation of graphene oxide (GO) sheets via the reduction of ferrous ion to form a graphene aerogel composite decorated with iron oxide nanoparticles. The prepared adsorbent showed outstanding absorption performance for the removal of As from contaminated water, because of its high surface-to-volume ratio and characteristic pore network in the 3D architecture. The performed case study using real drinking water contaminated with As under batch conditions showed successful removal of arsenic to the concentration recommended by the World Health Organisation (WHO).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Arsenic removal from water/wastewater using adsorbents—A critical review
Mohan, D., & Pittman, C. U. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.01.006 · Cited by 3,536
Natural zeolites as effective adsorbents in water and wastewater treatment
Wang, S., & Peng, Y. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.10.029 · Cited by 2,441
Cited by
Monolithic aerogel photocatalysts: a review
Wan, W., Zhang, R., Ma, M., & Zhou, Y. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta09227j · Cited by 205
Wang, H., Wang, H., Zhao, H., & Yan, Q. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122372 · Cited by 156
Nanotechnology Based Solutions for Wastewater Treatment
Baruah, A., Chaudhary, V., Malik, R., & Tomer, V. K. (2019) · Nanotechnology in Water and Wastewater Treatment · doi:10.1016/b978-0-12-813902-8.00017-4 · Cited by 121
Pervez, M. N., Fu, D., Wang, X., Bao, Q., Yu, T., Naddeo, V., Tian, H., Cao, C., & Zhao, Y. (2021) · Environmental Technology & Innovation · doi:10.1016/j.eti.2021.101437 · Cited by 49
Metadata
- Authors
- Andjelkovic, I., Tran, D. N. H., Kabiri, S., Azari, S., Markovic, M., & Losic, D.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-04-28
- Volume
- 7
- Issue
- 18
- Pages
- 9758-9766
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2319786373
- Cited by
- 178
- References
- 2
- FWCI
- 13.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.