The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Band Gap Tuning of CH3NH3Pb(Br1–xClx)3 Hybrid Perovskite for Blue Electroluminescence
Abstract
We report on the structural, morphological and optical properties of AB(Br(1-x)Cl(x))3 (where, A = CH3NH3(+), B = Pb(2+) and x = 0 to 1) perovskite semiconductor and their successful demonstration in green and blue emissive perovskite light emitting diodes at room temperature. The bandgap of perovskite thin film is tuned from 2.42 to 3.16 eV. The onset of optical absorption is dominated by excitonic effects. The coulomb field of the exciton influences the absorption at the band edge. Hence, it is necessary to explicitly account for the enhancement of the absorption through the Sommerfield factor. This enables us to correctly extract the exciton binding energy and the electronic bandgap. We also show that the lattice constant varies linearly with the fractional chlorine content satisfying Vegards law.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Bright light-emitting diodes based on organometal halide perovskite
Tan, Z.-K., Moghaddam, R. S., Lai, M. L., Docampo, P., Higler, R., Deschler, F., Price, M., Sadhanala, A., Pazos, L. M., Credgington, D., et al. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.149 · Cited by 4,450
Low-temperature solution-processed wavelength-tunable perovskites for lasing
Xing, G., Mathews, N., Lim, S. S., Yantara, N., Liu, X., Sabba, D., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2014) · Nature Materials · doi:10.1038/nmat3911 · Cited by 3,219
Perovskites: The Emergence of a New Era for Low-Cost, High-Efficiency Solar Cells
Snaith, H. J. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz4020162 · Cited by 3,042
Baikie, T., Fang, Y., Kadro, J. M., Schreyer, M., Wei, F., Mhaisalkar, S. G., Graetzel, M., & White, T. J. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10518k · Cited by 2,534
Deschler, F., Price, M., Pathak, S., Klintberg, L. E., Jarausch, D.-D., Higler, R., Hüttner, S., Leijtens, T., Stranks, S. D., Snaith, H. J., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5005285 · Cited by 1,753
Halide perovskite materials for solar cells: a theoretical review
Yin, W.-J., Yang, J.-H., Kang, J., Yan, Y., & Wei, S.-H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05033a · Cited by 1,437
Multicolored Organic/Inorganic Hybrid Perovskite Light‐Emitting Diodes
Kim, Y., Cho, H., Heo, J. H., Kim, T., Myoung, N., Lee, C., Im, S. H., & Lee, T. (2015) · Advanced Materials · doi:10.1002/adma.201403751 · Cited by 1,273
Approaching disorder-free transport in high-mobility conjugated polymers
Venkateshvaran, D., Nikolka, M., Sadhanala, A., Lemaur, V., Zelazny, M., Kepa, M., Hurhangee, M., Kronemeijer, A. J., Pecunia, V., Nasrallah, I., et al. (2014) · Nature · doi:10.1038/nature13854 · Cited by 1,050
Trap‐Assisted Non‐Radiative Recombination in Organic–Inorganic Perovskite Solar Cells
Wetzelaer, G. A. H., Scheepers, M., Sempere, A. M., Momblona, C., Ávila, J., & Bolink, H. J. (2015) · Advanced Materials · doi:10.1002/adma.201405372 · Cited by 849
Organolead Halide Perovskite: New Horizons in Solar Cell Research
Kim, H.-S., Im, S. H., & Park, N.-G. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp409025w · Cited by 722
Interface energetics in organo-metal halide perovskite-based photovoltaic cells
Schulz, P., Edri, E., Kirmayer, S., Hodes, G., Cahen, D., & Kahn, A. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00168k · Cited by 710
Heo, J. H., Song, D. H., & Im, S. H. (2014) · Advanced Materials · doi:10.1002/adma.201403140 · Cited by 497
Fundamentals of semiconductors: physics and materials properties
(1996) · Choice Reviews Online · doi:10.5860/choice.33-6366 · Cited by 361
Defect density and dielectric constant in perovskite solar cells
Samiee, M., Konduri, S., Ganapathy, B., Kottokkaran, R., Abbas, H. A., Kitahara, A., Joshi, P., Zhang, L., Noack, M., & Dalal, V. (2014) · Applied Physics Letters · doi:10.1063/1.4897329 · Cited by 269
Efficient Single‐Layer Polymer Light‐Emitting Diodes
Kabra, D., Lu, L. P., Song, M. H., Snaith, H. J., & Friend, R. H. (2010) · Advanced Materials · doi:10.1002/adma.201000317 · Cited by 254
Self-citationPerovskite Thin Films via Atomic Layer Deposition
Sutherland, B. R., Hoogland, S., Adachi, M. M., Kanjanaboos, P., Wong, C. T. O., McDowell, J. J., Xu, J., Voznyy, O., Ning, Z., Houtepen, A. J., et al. (2015) · Advanced Materials · doi:10.1002/adma.201403965 · Cited by 235
Hodes, G., & Cahen, D. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.5 · Cited by 159
Kumawat, N. K., Dey, A., Narasimhan, K. L., & Kabra, D. (2015) · ACS Photonics · doi:10.1021/acsphotonics.5b00018 · Cited by 138
Self-citationChen, K., Barker, A. J., Morgan, F. L. C., Halpert, J. E., & Hodgkiss, J. M. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502528c · Cited by 131
Zhang, M., Lyu, M., Yu, H., Yun, J., Wang, Q., & Wang, L. (2014) · Chemistry - A European Journal · doi:10.1002/chem.201404427 · Cited by 119
Tunable and Predetermined Bandgap Emissions in Alloyed ZnSxSe1–x Nanowires
Wang, M., Fei, G. T., Zhang, Y., Kong, M., & Zhang, L. (2007) · Advanced Materials · doi:10.1002/adma.200602919 · Cited by 98
The ordered phase of methylammonium lead chloride CH3ND3PbCl3
Chi, L., Swainson, I. P., Cranswick, L. M. D., Her, J., Stephens, P. W., & Knop, O. (2005) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2004.12.037 · Cited by 97
Optically‐Pumped Lasing in Hybrid Organic–Inorganic Light‐Emitting Diodes
Song, M. H., Kabra, D., Wenger, B., Friend, R. H., & Snaith, H. J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801833 · Cited by 57
Self-citation
Cited by
Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes
Cho, H., Jeong, S.-H., Park, M.-H., Kim, Y.-H., Wolf, C., Lee, C.-L., Heo, J. H., Sadhanala, A., Myoung, N., Yoo, S., et al. (2015) · Science · doi:10.1126/science.aad1818 · Cited by 2,925
Sutherland, B. R., & Sargent, E. H. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.62 · Cited by 1,730
State of the Art and Prospects for Halide Perovskite Nanocrystals
Dey, A., Ye, J., De, A., Debroye, E., Ha, S. K., Bladt, E., Kshirsagar, A. S., Wang, Z., Yin, J., Wang, Y., et al. (2021) · ACS Nano · doi:10.1021/acsnano.0c08903 · Cited by 1,478
Self-citationColor-stable highly luminescent sky-blue perovskite light-emitting diodes
Xing, J., Zhao, Y., Askerka, M., Quan, L. N., Gong, X., Zhao, W., Zhao, J., Tan, H., Long, G., Gao, L., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05909-8 · Cited by 720
Li, Z., Chen, Z., Yang, Y., Xue, Q., Yip, H.-L., & Cao, Y. (2019) · Nature Communications · doi:10.1038/s41467-019-09011-5 · Cited by 565
Metadata
- Authors
- Kumawat, N. K., Dey, A., Kumar, A., Gopinathan, S. P., Narasimhan, K. L., & Kabra, D.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-06-11
- Volume
- 7
- Issue
- 24
- Pages
- 13119-13124
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2517092238
- Cited by
- 379
- References
- 28
- FWCI
- 15.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.