The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Constructing Uniform Core–Shell PPy@PANI Composites with Tunable Shell Thickness toward Enhancement in Microwave Absorption
Abstract
Highly uniform core-shell composites, polypyrrole@polyaniline (PPy@PANI), have been successfully constructed by directing the polymerization of aniline on the surface of PPy microspheres. The thickness of PANI shells, from 30 to 120 nm, can be well controlled by modulating the weight ratio of aniline and PPy microspheres. PPy microspheres with abundant carbonyl groups have very strong affinity to the conjugated chains of PANI, which is responsible for the spontaneous formation of uniform core-shell microstructures. However, the strong affinity between PPy microspheres and PANI shells does not promote the diffusion or reassembly of two kinds of conjugated chains. Coating PPy microspheres with PANI shells increases the complex permittivity and creates the mechanism of interfacial polarization, where the latter plays an important role in increasing the dielectric loss of PPy@PANI composites. With a proper thickness of PANI shells, the moderate dielectric loss will produce well matched characteristic impedance, so that the microwave absorption properties of these composites can be greatly enhanced. Although PPy@PANI composites herein consume the incident electromagnetic wave by absolute dielectric loss, their performances are still superior or comparable to most PANI-based composites ever reported, indicating that they can be taken as a new kind of promising lightweight microwave absorbers. More importantly, microwave absorption of PPy@PANI composites can be simply modulated not only by the thickness of the absorbers, but also the shell thickness to satisfy the applications in different frequency bands.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Introduction to Solid State Physics
Kittel, C., & Dexter, D. L. (1953) · American Journal of Physics · doi:10.1119/1.1933590 · Cited by 13,240
Temperature dependent microwave attenuation behavior for carbon-nanotube/silica composites
Wen, B., Cao, M.-S., Hou, Z.-L., Song, W.-L., Zhang, L., Lu, M.-M., Jin, H.-B., Fang, X.-Y., Wang, W.-Z., & Yuan, J. (2013) · Carbon · doi:10.1016/j.carbon.2013.07.110 · Cited by 1,196
Sun, H., Che, R., You, X., Jiang, Y., Yang, Z., Deng, J., Qiu, L., & Peng, H. (2014) · Advanced Materials · doi:10.1002/adma.201403735 · Cited by 1,120
Shell Thickness-Dependent Microwave Absorption of Core–Shell Fe3O4@C Composites
Du, Y., Liu, W., Qiang, R., Wang, Y., Han, X., Ma, J., & Xu, P. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502910d · Cited by 990
Self-citationCao, M.-S., Yang, J., Song, W.-L., Zhang, D.-Q., Wen, B., Jin, H.-B., Hou, Z.-L., & Yuan, J. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am3021069 · Cited by 899
Liu, J., Che, R., Chen, H., Zhang, F., Xia, F., Wu, Q., & Wang, M. (2012) · Small · doi:10.1002/smll.201102245 · Cited by 809
Wang, G., Gao, Z., Tang, S., Chen, C., Duan, F., Zhao, S., Lin, S., Feng, Y., Zhou, L., & Qin, Y. H. (2012) · ACS Nano · doi:10.1021/nn304630h · Cited by 795
Synthesis of Polyaniline Nanofibers by “Nanofiber Seeding”
Zhang, X., Goux, W. J., & Manohar, S. K. (2004) · Journal of the American Chemical Society · doi:10.1021/ja031867a · Cited by 691
Metal organic framework-derived Fe/C nanocubes toward efficient microwave absorption
Qiang, R., Du, Y., Zhao, H., Wang, Y., Tian, C., Li, Z., Han, X., & Xu, P. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01457c · Cited by 652
Self-citationOhlan, A., Singh, K., Chandra, A., & Dhawan, S. K. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am900893d · Cited by 381
Lv, H., Liang, X., Cheng, Y. L., Zhang, H., Tang, D., Zhang, B., Ji, G., & Du, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am508438s · Cited by 361
Self-citationKong, L., Yin, X., Zhang, Y., Yuan, X., Li, Q., Ye, F., Cheng, L., & Zhang, L. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp4058498 · Cited by 357
Sun, D., Zou, Q., Wang, Y., Wang, Y., Jiang, W., & Li, F. (2014) · Nanoscale · doi:10.1039/c3nr06797a · Cited by 330
Self-citationSingh, A. P., Mishra, M., Sambyal, P., Gupta, B. K., Singh, A. P., Chandra, A., & Dhawan, S. K. (2014) · Journal of Materials Chemistry A · doi:10.1039/c3ta14212d · Cited by 296
Excellent microwave absorption property of Graphene-coated Fe nanocomposites
Zhao, X., Zhang, Z., Wang, L., Xi, K., Cao, Q., Wang, D., Yang, Y., & Du, Y. (2013) · Scientific Reports · doi:10.1038/srep03421 · Cited by 251
Self-citationZhu, J., Wei, S., Haldolaarachchige, N., Young, D. P., & Guo, Z. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp2052536 · Cited by 251
Magnetoresistive polyaniline-magnetite nanocomposites with negative dielectrical properties
Gu, H., Huang, Y., Zhang, X., Wang, Q., Zhu, J., Shao, L., Haldolaarachchige, N., Young, D. P., Wei, S., & Guo, Z. (2012) · Polymer · doi:10.1016/j.polymer.2011.12.033 · Cited by 247
Synthesis and characterization of soluble polypyrrole doped with alkylbenzenesulfonic acids
Song, M., Kim, Y., Kim, B., Kim, J., Char, K., & Rhee, H. (2003) · Synthetic Metals · doi:10.1016/j.synthmet.2003.07.015 · Cited by 150
Xu, J., Liu, J., Che, R., Liang, C., Cao, M., Li, Y., & Liu, Z. (2014) · Nanoscale · doi:10.1039/c4nr00158c · Cited by 131
Xing, S., Tan, L. H., Yang, M., Pan, M., Lv, Y., Tang, Q., Yang, Y., & Chen, H. (2009) · Journal of Materials Chemistry · doi:10.1039/b900993k · Cited by 126
He, Q., Yuan, T., Zhang, X., Yan, X., Guo, J., Ding, D., Khan, M. A., Young, D. P., Khasanov, A. M., Luo, Z., et al. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp507975r · Cited by 92
Self-citationGreen-nano approach to nanostructured polypyrrole
Liu, Z., Liu, Y., Poyraz, S., & Zhang, X. (2011) · Chemical Communications · doi:10.1039/c1cc10208g · Cited by 69
Micellar Nanoreactors for Hematin Catalyzed Synthesis of Electrically Conducting Polypyrrole
Ravichandran, S., Nagarajan, S., Kokil, A., Ponrathnam, T., Bouldin, R. M., Bruno, F. F., Samuelson, L. A., Kumar, J., & Nagarajan, R. (2012) · Langmuir · doi:10.1021/la302494a · Cited by 35
Cited by
Dielectric Loss Mechanism in Electromagnetic Wave Absorbing Materials
Qin, M., Zhang, L., & Wu, H. (2022) · Advanced Science · doi:10.1002/advs.202105553 · Cited by 1,497
Graphene-based microwave absorbing composites: A review and prospective
Meng, F., Wang, H., Huang, F., Guo, Y., Wang, Z., Hui, D., & Zhou, Z. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.11.023 · Cited by 793
A review on carbon/magnetic metal composites for microwave absorption
Wang, B., Wu, Q., Fu, Y., & Liu, T. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.12.078 · Cited by 616
Zhao, B., Guo, X., Zhao, W., Deng, J., Shao, G., Fan, B., Bai, Z., & Zhang, R. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10886 · Cited by 596
MnO2‐Based Materials for Environmental Applications
Yang, R., Fan, Y., Ye, R., Tang, Y., Cao, X., Yin, Z., & Zeng, Z. (2021) · Advanced Materials · doi:10.1002/adma.202004862 · Cited by 461
Metadata
- Authors
- Tian, C., Du, Y., Xu, P., Qiang, R., Wang, Y., Ding, D., Xue, J., Ma, J., Zhao, H., & Han, X.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-09-03
- Volume
- 7
- Issue
- 36
- Pages
- 20090-20099
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2474069759
- Cited by
- 511
- References
- 23
- FWCI
- 13.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.