The DOI matches its Crossref record.
Enhancing the High-Voltage Cycling Performance of LiNi0.5Mn0.3Co0.2O2 by Retarding Its Interfacial Reaction with an Electrolyte by Atomic-Layer-Deposited Al2O3
Abstract
High-voltage (>4.3 V) operation of LiNi(x)Mn(y)Co(z)O2 (NMC; 0 ≤ x, y, z < 1) for high capacity has become a new challenge for next-generation lithium-ion batteries because of the rapid capacity degradation over cycling. In this work, we investigate the performance of LiNi(0.5)Mn(0.3)Co(0.2)O2 (NMC532) electrodes with and without an atomic-layer-deposited (ALD) Al2O3 layer for charging/discharging in the range from 3.0 to 4.5 V (high voltage). The results of the electrochemical measurements show that the cells with ALD Al2O3-coated NMC532 electrodes have much enhanced cycling stability. The mechanism was investigated by using X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, and electrochemical methods. We find that the ultrathin ALD Al2O3 film can reduce the interface resistance of lithium-ion diffusion and enhance the surface stability of NMC532 by retarding the reactions at NMC532/electrolyte interfaces for preventing the formation of a new microstructure rock-salt phase NiO around the NMC532 surfaces.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
High-voltage liquid electrolytes for Li batteries: progress and perspectives
Fan, X., & Wang, C. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00450f · Cited by 980
Degradation Mechanisms and Mitigation Strategies of Nickel-Rich NMC-Based Lithium-Ion Batteries
Li, T., Yuan, X.-Z., Zhang, L., Song, D., Shi, K., & Bock, C. (2020) · Electrochemical Energy Reviews · doi:10.1007/s41918-019-00053-3 · Cited by 753
A perspective on nickel-rich layered oxide cathodes for lithium-ion batteries
Manthiram, A., Song, B., & Li, W. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.10.007 · Cited by 628
Oxygen Release Degradation in Li‐Ion Battery Cathode Materials: Mechanisms and Mitigating Approaches
Sharifi‐Asl, S., Lu, J., Amine, K., & Shahbazian‐Yassar, R. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900551 · Cited by 532
Ni‐Rich/Co‐Poor Layered Cathode for Automotive Li‐Ion Batteries: Promises and Challenges
Wang, X., Ding, Y., Deng, Y., & Chen, Z. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903864 · Cited by 427
Self-citationXu, G., Liu, X., Daali, A., Amine, R., Chen, Z., & Amine, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202004748 · Cited by 313
Ye, J., Chen, H., Wang, Q., Huang, P., Sun, J., & Lo, S. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.08.124 · Cited by 304
Hou, P., Yin, J., Ding, M., Huang, J., & Xu, X. (2017) · Small · doi:10.1002/smll.201701802 · Cited by 289
Wang, W., Yang, T., Li, S., Fan, W., Zhao, X., Fan, C., Yu, L., Zhou, S., Zuo, X., Zeng, R., et al. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.05.027 · Cited by 61
He, Z., Guo, Z., Wa, Q., Zhong, X., Wang, X., & Chen, Y. (2020) · Journal of Materials Research · doi:10.1557/jmr.2019.325 · Cited by 21
Self-citation
Metadata
- Authors
- Su, Y., Cui, S., Zhuo, Z., Yang, W., Wang, X., & Pan, F.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-11-05
- Volume
- 7
- Issue
- 45
- Pages
- 25105-25112
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2410677439
- Cited by
- 173
- References
- 0
- FWCI
- 8.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.