Investigation of the Interaction between Perovskite Films with Moisture via in Situ Electrical Resistance Measurement
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Organometal halide perovskites have recently emerged as outstanding semiconductors for solid-state optoelectronic devices. Their sensitivity to moisture is one of the biggest barriers to commercialization. In order to identify the effect of moisture in the degradation process, here we combined the in situ electrical resistance measurement with time-resolved X-ray diffraction analysis to investigate the interaction of CH3NH3PbI(3-x)Cl(x) perovskite films with moisture. Upon short-time exposure, the resistance of the perovskite films decreased and it could be fully recovered, which were ascribed to a mere chemisorption of water molecules, followed by the reversible hydration into CH3NH3PbI(3-x)Cl(x)·H2O. Upon long-time exposure, however, the resistance became irreversible due to the decomposition into PbI2. The results demonstrated the formation of monohydrated intermediate phase when the perovskites interacted with moisture. The role of moisture in accelerating the thermal degradation at 85 °C was also demonstrated. Furthermore, our study suggested that the perovskite films with fewer defects may be more inherently resistant to moisture.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lead halide perovskite nanowire lasers with low lasing thresholds and high quality factors
Zhu, H., Fu, Y., Meng, F., Wu, X., Gong, Z., Ding, Q., Gustafsson, M. V., Trinh, M. T., Jin, S., & Zhu, X.-Y. (2015) · Nature Materials · doi:10.1038/nmat4271 · Cited by 2,836 · cited 1×
“solution-processable photodectors,(4-6) light-emitting diodes(7-9) and lasers.(10)”
Cited by
Impact of H2O on organic–inorganic hybrid perovskite solar cells
Huang, J., Tan, S., Lund, P. D., & Zhou, H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01674c · Cited by 489
Lead‐Free Cs 2 BiAgBr 6 Double Perovskite‐Based Humidity Sensor with Superfast Recovery Time
Weng, Z., Qin, J., Umar, A. A., Wang, J., Zhang, X., Wang, H., Cui, X., Li, X., Zheng, L., & Zhan, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201902234 · Cited by 236
Self-citationCho, M., Kim, S., Kim, I., Kim, E., Wang, Z., Kim, N., Kim, S., & Oh, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201907449 · Cited by 169
Brintakis, K., Gagaoudakis, E., Kostopoulou, A., Faka, V., Argyrou, A., Binas, V., Kiriakidis, G., & Stratakis, E. (2019) · Nanoscale Advances · doi:10.1039/c9na00219g · Cited by 58
Baumann, F., Raga, S. R., & Lira-Cantú, M. (2023) · APL Energy · doi:10.1063/5.0145199 · Cited by 48
Metadata
- Authors
- Hu, L., Shao, G., Jiang, T., Li, D., Lv, X., Wang, H., Liu, X., Song, H., Tang, J., & Liu, H.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-11-04
- Volume
- 7
- Issue
- 45
- Pages
- 25113-25120
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2441526204
- Cited by
- 85
- References
- 1
- FWCI
- 4.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.