The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Insights into the Performance Limits of the Li7P3S11 Superionic Conductor: A Combined First-Principles and Experimental Study
Abstract
The Li7P3S11 glass-ceramic is a promising superionic conductor electrolyte (SCE) with an extremely high Li(+) conductivity that exceeds that of even traditional organic electrolytes. In this work, we present a combined computational and experimental investigation of the material performance limitations in terms of its phase and electrochemical stability, and Li(+) conductivity. We find that Li7P3S11 is metastable at 0 K but becomes stable at above 630 K (∼360 °C) when vibrational entropy contributions are accounted for, in agreement with differential scanning calorimetry measurements. Both scanning electron microscopy and the calculated Wulff shape show that Li7P3S11 tends to form relatively isotropic crystals. In terms of electrochemical stability, first-principles calculations predict that, unlike the LiCoO2 cathode, the olivine LiFePO4 and spinel LiMn2O4 cathodes are likely to form stable passivation interfaces with the Li7P3S11 SCE. This finding underscores the importance of considering multicomponent integration in developing an all-solid-state architecture. To probe the fundamental limit of its bulk Li(+) conductivity, a comparison of conventional cold-press sintered versus spark-plasma sintering (SPS) Li7P3S11 was done in conjunction with ab initio molecular dynamics (AIMD) simulations. Though the measured diffusion activation barriers are in excellent agreement, the AIMD-predicted room-temperature Li(+) conductivity of 57 mS cm(-1) is much higher than the experimental values. The optimized SPS sample exhibits a room-temperature Li(+) conductivity of 11.6 mS cm(-1), significantly higher than that of the cold-pressed sample (1.3 mS cm(-1)) due to the reduction of grain boundary resistance by densification. We conclude that grain boundary conductivity is limiting the overall Li(+) conductivity in Li7P3S11, and further optimization of overall conductivities should be possible. Finally, we show that Li(+) motions in this material are highly collective, and the flexing of the P2S7 ditetrahedra facilitates fast Li(+) diffusion.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hybrid functionals based on a screened Coulomb potential
Heyd, J., Scuseria, G. E., & Ernzerhof, M. (2003) · The Journal of Chemical Physics · doi:10.1063/1.1564060 · Cited by 19,629
Commentary: The Materials Project: A materials genome approach to accelerating materials innovation
Jain, A., Ong, S. P., Hautier, G., Chen, W., Richards, W. D., Dacek, S., Cholia, S., Gunter, D., Skinner, D., Ceder, G., et al. (2013) · APL Materials · doi:10.1063/1.4812323 · Cited by 13,094
Self-citationElectrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Python Materials Genomics (pymatgen): A robust, open-source python library for materials analysis
Ong, S. P., Richards, W. D., Jain, A., Hautier, G., Kocher, M., Cholia, S., Gunter, D., Chevrier, V. L., Persson, K. A., & Ceder, G. (2013) · Computational Materials Science · doi:10.1016/j.commatsci.2012.10.028 · Cited by 4,534
Self-citation
Cited by
Chen, R., Li, Q., Yu, X., Chen, L., & Li, H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00268 · Cited by 1,678
Tian, Y., Zeng, G., Rutt, A., Shi, T., Kim, H., Wang, J., Koettgen, J., Sun, Y., Ouyang, B., Chen, T., et al. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00767 · Cited by 1,614
Review on solid electrolytes for all-solid-state lithium-ion batteries
Zheng, F., Kotobuki, M., Song, S., Lai, M. O., & Lu, L. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.022 · Cited by 1,397
Understanding interface stability in solid-state batteries
Xiao, Y., Wang, Y., Bo, S.-H., Kim, J. C., Miara, L. J., & Ceder, G. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0157-5 · Cited by 1,219
Kim, K. J., Balaish, M., Wadaguchi, M., Kong, L., & Rupp, J. L. M. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002689 · Cited by 806
Sulfide Solid Electrolytes for Lithium Battery Applications
Lau, J., DeBlock, R. H., Butts, D. M., Ashby, D. S., Choi, C. S., & Dunn, B. S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800933 · Cited by 678
Park, K. H., Bai, Q., Kim, D. H., Oh, D. Y., Zhu, Y., Mo, Y., & Jung, Y. S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800035 · Cited by 589
Wang, C., Liang, J., Zhao, Y., Zheng, M., Li, X., & Sun, X. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00551k · Cited by 489
Computational Screening of Cathode Coatings for Solid-State Batteries
Xiao, Y., Miara, L. J., Wang, Y., & Ceder, G. (2019) · Joule · doi:10.1016/j.joule.2019.02.006 · Cited by 451
All-Solid-State Lithium Batteries with Sulfide Electrolytes and Oxide Cathodes
Wu, J., Shen, L., Zhang, Z., Liu, G., Wang, Z., Zhou, D., Wan, H., Xu, X., & Yao, X. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00081-4 · Cited by 373
Self-citationA new halospinel superionic conductor for high-voltage all solid state lithium batteries
Zhou, L., Kwok, C. Y., Shyamsunder, A., Zhang, Q., Wu, X., & Nazar, L. F. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01017k · Cited by 335
Sulfide and Oxide Inorganic Solid Electrolytes for All-Solid-State Li Batteries: A Review
Reddy, M. V., Julien, C. M., Mauger, A., & Zaghib, K. (2020) · Nanomaterials · doi:10.3390/nano10081606 · Cited by 331
Interface engineering of sulfide electrolytes for all-solid-state lithium batteries
Xu, R., Han, F., Ji, X., Fan, X., Tu, J., & Wang, C. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.09.061 · Cited by 329
Data-Driven First-Principles Methods for the Study and Design of Alkali Superionic Conductors
Deng, Z., Zhu, Z., Chu, I.-H., & Ong, S. P. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02648 · Cited by 321
Self-citationElectrolyte/Electrode Interfaces in All-Solid-State Lithium Batteries: A Review
Pang, Y., Pan, J., Yang, J., Zheng, S., & Wang, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00092-1 · Cited by 313
Boosting Rechargeable Batteries R&D by Multiscale Modeling: Myth or Reality?
Franco, A. A., Rucci, A., Brandell, D., Frayret, C., Gaberscek, M., Jankowski, P., & Johansson, P. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00239 · Cited by 308
Chu, I.-H., Kompella, C. S., Nguyen, H., Zhu, Z., Hy, S., Deng, Z., Meng, Y. S., & Ong, S. P. (2016) · Scientific Reports · doi:10.1038/srep33733 · Cited by 290
Self-citationAntiperovskite Electrolytes for Solid-State Batteries
Xia, W., Zhao, Y., Zhao, F., Adair, K., Zhao, R., Li, S., Zou, R., Zhao, Y., & Sun, X. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00594 · Cited by 288
Building Better Batteries in the Solid State: A Review
Mauger, A., Julien, C. M., Paolella, A., Armand, M., & Zaghib, K. (2019) · Materials · doi:10.3390/ma12233892 · Cited by 277
Rechargeable Alkali-Ion Battery Materials: Theory and Computation
Van der Ven, A., Deng, Z., Banerjee, S., & Ong, S. P. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00601 · Cited by 264
Self-citation
Metadata
- Authors
- Chu, I.-H., Nguyen, H., Hy, S., Lin, Y.-C., Wang, Z., Xu, Z., Deng, Z., Meng, Y. S., & Ong, S. P.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-03-17
- Volume
- 8
- Issue
- 12
- Pages
- 7843-7853
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2297042119
- Cited by
- 225
- References
- 4
- FWCI
- 11.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.