The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Biobased Nano Porous Active Carbon Fibers for High-Performance Supercapacitors
Abstract
Activated carbon fibers (ACFs) with different pore structure have been prepared from wood sawdust using the KOH activation method. A study was conducted to examine the influence of the activation parameters (temperature, alkali/carbon ratio, and time) on the morphology and structure of the as-prepared ACFs developed in the process of pore generation and evolution. Activation temperature was very essential for the formation of utramicropores (<0.6 nm), which greatly contributed to the electric double layer capacitance. The significance of metallic potassium vapor evolved when the temperature was above 800 °C, since the generation of 0.8- and 1.1 nm micropores cannot be ignored. When the the KOH/fiber ratio was increased and the activation time was prolonged, to some extent, the micropores were enlarged to small mesopores within 2-5 nm. The sample with the optimal condition exhibited the highest specific capacitance (225 F g(-1) at a current density of 0.5 A g(-1)). Its ability to retain capacitance corresponding to 10 A g(-1) and 6 M KOH was 85.3%, demonstrating a good rate capability. With 10 000 charge-discharge cycles at 3 A g(-1), the supercapacitor kept 94.2% capacity, showing outstanding electrochemical performance as promising electrode material.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Cited by
Biomass derived porous carbon for CO2 capture
Singh, G., Lakhi, K. S., Sil, S., Bhosale, S. V., Kim, I., Albahily, K., & Vinu, A. (2019) · Carbon · doi:10.1016/j.carbon.2019.03.050 · Cited by 555
Synthesis of garlic skin-derived 3D hierarchical porous carbon for high-performance supercapacitors
Zhang, Q., Han, K., Li, S., Li, M., Li, J., & Ren, K. (2018) · Nanoscale · doi:10.1039/c7nr07158b · Cited by 456
Kumar, N., Kim, S.-B., Lee, S.-Y., & Park, S.-J. (2022) · Nanomaterials · doi:10.3390/nano12203708 · Cited by 413
Liu, F., Wang, Z., Zhang, H., Jin, L., Chu, X., Gu, B., Huang, H., & Yang, W. (2019) · Carbon · doi:10.1016/j.carbon.2019.04.023 · Cited by 365
Purkait, T., Singh, G., Singh, M., Kumar, D., & Dey, R. S. (2017) · Scientific Reports · doi:10.1038/s41598-017-15463-w · Cited by 344
Metadata
- Authors
- Huang, Y., Peng, L., Liu, Y., Zhao, G., Chen, J. Y., & Yu, G.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-06-07
- Volume
- 8
- Issue
- 24
- Pages
- 15205-15215
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2397913590
- Cited by
- 249
- References
- 2
- FWCI
- 10.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Biobased Nano Porous Active Carbon Fibers for High-Performance Supercapacitors. https://app.cochat.ai/papers/10.1021/acsami.6b02214
- The paper
- Huang, Y., Peng, L., Liu, Y., Zhao, G., Chen, J. Y., & Yu, G. (2016). Biobased Nano Porous Active Carbon Fibers for High-Performance Supercapacitors. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6b02214
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.