The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Antibacterial Activities of Graphene Oxide–Molybdenum Disulfide Nanocomposite Films
Abstract
Two-dimensional (2D) nanomaterials, such as graphene-based materials and transition metal dichalcogenide (TMD) nanosheets, are promising materials for biomedical applications owing to their remarkable cytocompatibility and physicochemical properties. On the basis of their potent antibacterial properties, 2D materials have potential as antibacterial films, wherein the 2D nanosheets are immobilized on the surface and the bacteria may contact with the basal planes of 2D nanosheets dominantly rather than contact with the sharp edges of nanosheets. To address these points, in this study, we prepared an effective antibacterial surface consisting of representative 2D materials, i.e., graphene oxide (GO) and molybdenum disulfide (MoS 2 ), formed into nanosheets on a transparent substrate for real device applications. The antimicrobial properties of the GO–MoS 2 nanocomposite surface toward the Gram-negative bacteria Escherichia coli were investigated, and the GO–MoS 2 nanocomposite exhibited enhanced antimicrobial effects with increased glutathione oxidation capacity and partial conductivity. Furthermore, direct imaging of continuous morphological destruction in the individual bacterial cells having contacts with the GO–MoS 2 nanocomposite surface was characterized by holotomographic (HT) microscopy, which could be used to detect the refractive index (RI) distribution of each voxel in bacterial cell and reconstruct the three-dimensional (3D) mapping images of bacteria. In this regard, the decreases in both the volume (67.2%) and the dry mass (78.8%) of bacterial cells that came in contact with the surface for 80 min were quantitatively measured, and releasing of intracellular components mediated by membrane and oxidative stress was observed. Our findings provided new insights into the antibacterial properties of 2D nanocomposite film with label-free tracing of bacterial cell which improve our understanding of antimicrobial activities and opened a window for the 2D nanocomposite as a practical antibacterial film in biomedical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two-dimensional gas of massless Dirac fermions in graphene
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Katsnelson, M. I., Grigorieva, I. V., Dubonos, S. V., & Firsov, A. A. (2005) · Nature · doi:10.1038/nature04233 · Cited by 21,611
The chemistry of graphene oxide
Dreyer, D. R., Park, S., Bielawski, C. W., & Ruoff, R. S. (2010) · Chem. Soc. Rev. · doi:10.1039/b917103g · Cited by 11,653
Cited by
Antimicrobial Activity of Metal and Metal‐Oxide Based Nanoparticles
Gold, K., Slay, B., Knackstedt, M., & Gaharwar, A. K. (2018) · Advanced Therapeutics · doi:10.1002/adtp.201700033 · Cited by 758
Multifunctional Photoactive Hydrogels for Wound Healing Acceleration
Maleki, A., He, J., Bochani, S., Nosrati, V., Shahbazi, M.-A., & Guo, B. (2021) · ACS Nano · doi:10.1021/acsnano.1c08334 · Cited by 568
Antimicrobial Mode-of-Action of Colloidal Ti3C2Tx MXene Nanosheets
Arabi Shamsabadi, A., Sharifian Gh., M., Anasori, B., & Soroush, M. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03823 · Cited by 340
Li, M., Li, L., Su, K., Liu, X., Zhang, T., Liang, Y., Jing, D., Yang, X., Zheng, D., Cui, Z., et al. (2019) · Advanced Science · doi:10.1002/advs.201900599 · Cited by 305
Metadata
- Authors
- Kim, T. I., Kwon, B., Yoon, J., Park, I.-J., Bang, G. S., Park, Y., Seo, Y.-S., & Choi, S.-Y.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-02-27
- Volume
- 9
- Issue
- 9
- Pages
- 7908-7917
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2587992957
- Cited by
- 187
- References
- 2
- FWCI
- 9.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.