The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Effective Adsorption/Reduction of Cr(VI) Oxyanion by Halloysite@Polyaniline Hybrid Nanotubes
Abstract
Halloysite@polyaniline (HA@PANI) hybrid nanotubes are synthesized by the in situ chemical polymerization of aniline on halloysite clay nanotubes. By facilely tuning the dopant acid, pH, and apparent weight proportion for aniline (ANI) and halloysite (HA) nanotubes in the synthesis process, PANI with tuned oxidation state, doping extent, and content are in situ growing on halloysite nanotubes. The reaction system’s acidity is tuned by dopant acid, such as HCl, H 2 SO 4, HNO 3, and H 3 PO 4 . The adsorption result shows the fabricated HA@PANI hybrid nanotubes can effectively adsorb Cr(VI) oxyanion and the adsorption ability changes according to the dopant acid, pH, and apparent weight proportion for ANI and HA in the synthesis process. Among them, the HA@PANI fabricated with HCl as dopant acid tuning the pH at 0.5 and 204% apparent weight proportion for ANI and HA (HP/0.5/204%-HCl) shows the highest adsorption capacity. The adsorption capacity is in accordance well with the doping extent of PANI in HA@PANI. Furthermore, when HP/0.5/204%-HCl is redoped with HNO 3, H 2 SO 4, and H 3 PO 4, the adsorption capacity declines, implying the dopant acid in the process of redoping exhibits a marked effect on Cr(VI) oxyanion adsorption for the HA@PANI hybrid nanotubes. HP/0.5/204%-HCl and HP/0.5/204%-H 3 PO 4 have demonstrated good regenerability with an above 80% removal ratio after four cycles. Moreover, the HA@PANI adsorbent has better sedimentation ability than that of pure PANI. The adsorption behavior is in good agreement with Langmuir and pseudo second-order equations, indicating the adsorption of HA@PANI for Cr(VI) oxyanion is chemical adsorption. FT-IR and XPS of HA@PANI after Cr(VI) oxyanion adsorption indicate that the doped amine/imine groups (−NH + /═N + – groups) are the main adsorption sites for the removal of Cr(VI) oxyanion by electrostatic adsorption and reduction of the adsorbed Cr (VI) oxyanion to Cr(III) simultaneously.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Removal of heavy metal ions from wastewaters: A review
Fu, F., & Wang, Q. (2011) · Journal of Environmental Management · doi:10.1016/j.jenvman.2010.11.011 · Cited by 8,703
Gupta, V. K., Rastogi, A., & Nayak, A. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.09.065 · Cited by 644
Zhu, K., Gao, Y., Tan, X., & Chen, C. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00922 · Cited by 228
Cited by
Zhang, L., Tang, S., He, F., Liu, Y., Mao, W., & Guan, Y. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122215 · Cited by 300
Halloysite nanotubes as support for metal-based catalysts
Massaro, M., Colletti, C. G., Lazzara, G., Milioto, S., Noto, R., & Riela, S. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02996a · Cited by 297
Song, L., Liu, F., Zhu, C., & Li, A. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.03.126 · Cited by 274
Polyaniline-based adsorbents for aqueous pollutants removal: A review
Samadi, A., Xie, M., Li, J., Shon, H., Zheng, C., & Zhao, S. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129425 · Cited by 258
Das, S., Chakraborty, P., Ghosh, R., Paul, S., Mondal, S., Panja, A., & Nandi, A. K. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02342 · Cited by 137
Hou, R., Wang, L., Shen, Z., Alessi, D. S., & Hou, D. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.125650 · Cited by 71
Metadata
- Authors
- Zhou, T., Li, C., Jin, H., Lian, Y., & Han, W.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-02-07
- Volume
- 9
- Issue
- 7
- Pages
- 6030-6043
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2582796465
- Cited by
- 176
- References
- 3
- FWCI
- 12.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.