The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Fabrication of Stretchable Nanocomposites with High Energy Density and Low Loss from Cross-Linked PVDF Filled with Poly(dopamine) Encapsulated BaTiO3
Abstract
(BT) nanoparticle (PDA@BT) filled composites using PVDF matrix cross-linked by the free radical initiator. The effects of both the particle encapsulation and matrix cross-linking on the mechanical and dielectric properties of the composites were carefully investigated. The results suggested that the introduction of BT particles improved permittivity of the composites to ∼30 at 100 Hz when particle contents of only 7 wt % were utilized. This was attributed to the enhanced polarization, which was induced by high permittivity ceramic particles. Compared to bare BT, PDA@BT particles could be dispersed more homogeneously in the matrix, and the catechol groups of PDA layer might form chelation with free ions present in the matrix. The latter might depress the ion conduction loss in the composites. Other results revealed that the formation of hydrogen-bonding between the PDA layer and the polymer, especially the chemical cross-linking across the matrix, resulted in increased Young' modulus by ∼25%, improved breakdown strength by ∼40%, and declined conductivity by nearly 1 order of magnitude when compared to BT filled composites. The composite films filled with PDA@BTs indicated greater energy storage capacities by nearly 190% when compared to the pristine matrix. More importantly, the excellent mechanical performance allowed the composite films to adopt uni- or biaxially stretching, a crucial feature required for the realization of high breakdown strength. This work provided a facile strategy for fabrication of flexible and stretchable dielectric composites with depressed dielectric loss and enhanced energy storage capacity at low filler loadings (<10 wt %).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mussel-inspired surface chemistry for multifunctional coatings
Lee, H., Dellatore, S. M., Miller, W. M., & Messersmith, P. B. (2007) · Science · doi:10.1126/science.1147241 · Cited by 10,965
Flexible high-temperature dielectric materials from polymer nanocomposites
Li, Q., Chen, L., Gadinski, M. R., Zhang, S., Zhang, G., Li, H. U., Iagodkine, E., Haque, A., Chen, L.-Q., Jackson, T. N., et al. (2015) · Nature · doi:10.1038/nature14647 · Cited by 2,133
Fundamentals, processes and applications of high-permittivity polymer–matrix composites
Dang, Z.-M., Yuan, J.-K., Zha, J.-W., Zhou, T., Li, S.-T., & Hu, G.-H. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.08.001 · Cited by 1,783
Flexible Nanodielectric Materials with High Permittivity for Power Energy Storage
Dang, Z., Yuan, J., Yao, S., & Liao, R. (2013) · Advanced Materials · doi:10.1002/adma.201301752 · Cited by 1,454
Core–Shell Structured High‐k Polymer Nanocomposites for Energy Storage and Dielectric Applications
Huang, X., & Jiang, P. (2015) · Advanced Materials · doi:10.1002/adma.201401310 · Cited by 827
Exploring Strategies for High Dielectric Constant and Low Loss Polymer Dielectrics
Zhu, L. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501831q · Cited by 763
Polymer-Based Dielectrics with High Energy Storage Density
Chen, Q., Shen, Y., Zhang, S., & Zhang, Q. M. (2015) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070214-021017 · Cited by 642
High‐Dielectric‐Constant Silver–Epoxy Composites as Embedded Dielectrics
Qi, L., Lee, B. I., Chen, S., Samuels, W. D., & Exarhos, G. J. (2005) · Advanced Materials · doi:10.1002/adma.200401816 · Cited by 436
Song, Y., Shen, Y., Liu, H., Lin, Y., Li, M., & Nan, C.-W. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32579a · Cited by 381
Wu, C., Huang, X., Wu, X., Xie, L., Yang, K., & Jiang, P. (2013) · Nanoscale · doi:10.1039/c3nr00625e · Cited by 210
Yang, K., Huang, X., Zhu, M., Xie, L., Tanaka, T., & Jiang, P. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am4048267 · Cited by 184
Xie, L., Huang, X., Li, B.-W., Zhi, C., Tanaka, T., & Jiang, P. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp52799a · Cited by 167
Yang, K., Huang, X., He, J., & Jiang, P. (2015) · Advanced Materials Interfaces · doi:10.1002/admi.201500361 · Cited by 161
Li, D., Luo, L., Pang, Z., Ding, L., Wang, Q., Ke, H., Huang, F., & Weı, Q. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500375n · Cited by 130
Li, Y., Yuan, J., Xue, J., Cai, F., Chen, F., & Fu, Q. (2015) · Composites Science and Technology · doi:10.1016/j.compscitech.2015.09.004 · Cited by 79
Liu, S., Fu, J., Wang, M., Yan, Y. P., Xin, Q., Cai, L., & Xu, Q. J. (2016) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2016.02.011 · Cited by 65
Prediction of effective permittivity of diphasic dielectrics using an equivalent capacitance model
Patil, S. K., Koledintseva, M. Y., Schwartz, R. W., et al. (2008) · Journal of Applied Physics · doi:10.1063/1.2976173 · Cited by 61
Ejaz, M., Puli, V. S., Elupula, R., Adireddy, S., Riggs, B. C., Chrisey, D. B., & Grayson, S. M. (2014) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.27485 · Cited by 54
Suchanicz, J., Świerczek, K., Nogas-Ćwikiel, E., Konieczny, K., & Sitko, D. (2015) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.12.019 · Cited by 24
Cited by
Yang, Y., Pan, H., Xie, G., Jiang, Y., Chen, C., Su, Y., Wang, Y., & Tai, H. (2020) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2019.111789 · Cited by 496
Guan, X., Xu, B., & Gong, J. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104516 · Cited by 359
Pan, Z., Zhai, J., & Shen, B. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta03846a · Cited by 258
Metadata
- Authors
- Xie, Y., Yu, Y., Feng, Y., Jiang, W., & Zhang, Z.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-01-12
- Volume
- 9
- Issue
- 3
- Pages
- 2995-3005
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2571546311
- Cited by
- 266
- References
- 19
- FWCI
- 14.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
