New Method to Synthesize Highly Active and Durable Chemically Ordered fct-PtCo Cathode Catalyst for PEMFCs
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
In the bottom-up synthesis strategy performed in this study, the Co-catalyzed pyrolysis of chelate-complex and activated carbon black at high temperatures triggers the graphitization reaction which introduces Co particles in the N-doped graphitic carbon matrix and immobilizes N-modified active sites for the oxygen reduction reaction (ORR) on the carbon surface. In this study, the Co particles encapsulated within the N-doped graphitic carbon shell diffuse up to the Pt surface under the polymer protective layer and forms a chemically ordered face-centered tetragonal (fct) Pt–Co catalyst PtCo/CCCS catalyst as evidenced by structural and compositional studies. The fct-structured PtCo/CCCS at low-Pt loading (0.1 mg Pt cm –2 ) shows 6% higher power density than that of the state-of-the-art commercial Pt/C catalyst. After the MEA durability test of 30 000 potential cycles, the performance loss of the catalyst is negligible. The electrochemical surface area loss is less than 40%, while that of commercial Pt/C is nearly 80%. After the accelerated stress test, the uniform catalyst distribution is retained and the mean particle size increases approximate 1 nm. The results obtained in this study indicated that highly stable compositional and structural properties of chemically ordered PtCo/CCCS catalyst contribute to its exceptional catalyst durability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Trends in electrocatalysis on extended and nanoscale Pt-bimetallic alloy surfaces
Stamenkovic, V. R., Mun, B. S., Arenz, M., Mayrhofer, K. J. J., Lucas, C. A., Wang, G., Ross, P. N., & Markovic, N. M. (2007) · Nature Materials · doi:10.1038/nmat1840 · Cited by 3,252
A review of PEM fuel cell durability: Degradation mechanisms and mitigation strategies
Wu, J., Yuan, X. Z., Martin, J. J., Wang, H., Zhang, J., Shen, J., Wu, S., & Merida, W. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.06.006 · Cited by 1,587
Highly Durable and Active PtFe Nanocatalyst for Electrochemical Oxygen Reduction Reaction
Chung, D. Y., Jun, S. W., Yoon, G., Kwon, S. G., Shin, D. Y., Seo, P., Yoo, J. M., Shin, H., Chung, Y.-H., Kim, H., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b09653 · Cited by 677
New Approach to Fully Ordered fct-FePt Nanoparticles for Much Enhanced Electrocatalysis in Acid
Li, Q., Wu, L., Wu, G., Su, D., Lv, H., Zhang, S., Zhu, W., Casimir, A., Zhu, H., Mendoza-Garcia, A., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00320 · Cited by 460
Advanced Platinum Alloy Electrocatalysts for the Oxygen Reduction Reaction
Wang, C., Markovic, N. M., & Stamenkovic, V. R. (2012) · ACS Catalysis · doi:10.1021/cs3000792 · Cited by 440
Mani, P., Srivastava, R., & Strasser, P. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.07.047 · Cited by 379
One-Step Synthesis of FePt Nanoparticles with Tunable Size
Chen, M., Liu, J. P., & Sun, S. (2004) · Journal of the American Chemical Society · doi:10.1021/ja047648m · Cited by 368
Cited by
Wang, X. X., Swihart, M. T., & Wu, G. (2019) · Nature Catalysis · doi:10.1038/s41929-019-0304-9 · Cited by 1,174
Hard-Magnet L10-CoPt Nanoparticles Advance Fuel Cell Catalysis
Li, J., Sharma, S., Liu, X., Pan, Y.-T., Spendelow, J. S., Chi, M., Jia, Y., Zhang, P., Cullen, D. A., Xi, Z., et al. (2019) · Joule · doi:10.1016/j.joule.2018.09.016 · Cited by 532
Ordered Pt3Co Intermetallic Nanoparticles Derived from Metal–Organic Frameworks for Oxygen Reduction
Wang, X. X., Hwang, S., Pan, Y.-T., Chen, K., He, Y., Karakalos, S., Zhang, H., Spendelow, J. S., Su, D., & Wu, G. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b00978 · Cited by 403
Pt‐Based Nanocrystal for Electrocatalytic Oxygen Reduction
Zhao, Z., Chen, C., Liu, Z., Huang, J., Wu, M., Liu, H., Li, Y., & Huang, Y. (2019) · Advanced Materials · doi:10.1002/adma.201808115 · Cited by 384
Advancements in cathode catalyst and cathode layer design for proton exchange membrane fuel cells
Sun, Y., Polani, S., Luo, F., Ott, S., Strasser, P., & Dionigi, F. (2021) · Nature Communications · doi:10.1038/s41467-021-25911-x · Cited by 369
Metadata
- Authors
- Jung, W. S., & Popov, B. N.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-07-03
- Volume
- 9
- Issue
- 28
- Pages
- 23679-23686
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2726381879
- Cited by
- 66
- References
- 7
- FWCI
- 2.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.