The DOI matches its Crossref record.
Three-Dimensional WO3 Nanoplate/Bi2S3 Nanorod Heterojunction as a Highly Efficient Photoanode for Improved Photoelectrochemical Water Splitting
Abstract
The rational design of semiconductor photoanodes with sufficient light absorption, efficient photogenerated carrier separation, and fast charge transport is crucial for photoelectrochemical (PEC) water splitting. Incorporating a small-band-gap semiconductor to a large-band-gap material with matched energy band position is a promising route to improve the light harvesting and charge transport. Herein, we report the fabrication of a three-dimensional heterojunction with uniform Bi 2 S 3 nanorods on WO 3 nanoplates by hydrothermal process and chemical bath deposition. The seed layer strategy was used to assist the growth of Bi 2 S 3 nanorods for perfect interface contact between WO 3 and Bi 2 S 3 . The as-prepared WO 3 /Bi 2 S 3 composite exhibited a much enhanced photocurrent (5.95 mA/cm 2 at 0.9 V vs reversible hydrogen electrode), which is 35 and 1.4 times higher than those of pristine WO 3 and WO 3 /Bi 2 S 3 composite without a seed layer, respectively. In addition, higher incident photon-to-current conversion efficiency (68.8%) and photoconversion efficiency (1.70%) were achieved. The enhancement mechanism was investigated in detail, and the sufficient light absorption, efficient charge transport, and high carrier density simultaneously contribute to the improved PEC activity. These findings will open up new opportunities to develop other highly efficient heterostructures as photoelectrodes for PEC applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Chandrasekaran, S., Yao, L., Deng, L., Bowen, C., Zhang, Y., Chen, S., Lin, Z., Peng, F., & Zhang, P. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00664d · Cited by 1,199
Bismuth-based photocatalysts for solar energy conversion
Wang, S., Wang, L., & Huang, W. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta09729b · Cited by 338
Highly active deficient ternary sulfide photoanode for photoelectrochemical water splitting
Wang, H., Xia, Y., Li, H., Wang, X., Yu, Y., Jiao, X., & Chen, D. (2020) · Nature Communications · doi:10.1038/s41467-020-16800-w · Cited by 283
Advanced Catalysts for Photoelectrochemical Water Splitting
Marwat, M. A., Humayun, M., Afridi, M. W., Zhang, H., Abdul Karim, M. R., Ashtar, M., Usman, M., Waqar, S., Ullah, H., Wang, C., et al. (2021) · ACS Applied Energy Materials · doi:10.1021/acsaem.1c02548 · Cited by 191
Metadata
- Authors
- Wang, Y., Tian, W., Chen, L., Cao, F., Guo, J., & Li, L.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-11-07
- Volume
- 9
- Issue
- 46
- Pages
- 40235-40243
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2765282939
- Cited by
- 194
- References
- 0
- FWCI
- 4.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.