The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Interface Re-Engineering of Li10GeP2S12 Electrolyte and Lithium anode for All-Solid-State Lithium Batteries with Ultralong Cycle Life
Abstract
An ingenious interface re-engineering strategy was applied to in situ prepare a manipulated LiH 2 PO 4 protective layer on the surface of Li anode for circumventing the intrinsic chemical stability issues of Li 10 GeP 2 S 12 (LGPS) to Li metal, specifically the migration of mixed ionic-electronic reactants to the inner of LGPS, and the kinetically sluggish reactions in the interface. As consequence, the stability of LGPS with Li metal increased substantially and the cycling of symmetric Li/Li cell showed that the polarization voltage could keep relative stable for over 950 h at 0.1 mA cm –2 within ±0.05 V. The optimized ASSLiB of LiCoO 2 (LCO)/LGPS/Li with interface-engineered structure was able to deliver long cycle life and high capacity, i.e., a reversible discharge capacity of 131.1 mAh g –1 at the initial cycle and 113.7 mAh g –1 at the 500th cycle under 0.1 C with a retention of 86.7%. In addition, the factors effected on the interphases formation of the LGPS/Li interface were analyzed, and the mechanism of the stability between LGPS and Li anode with protective layer was further investigated. Moreover, the probable causes of battery degradation were also explored. Above all, this work would give an alternative strategy for the modification of Li anode in high energy density solid-state lithium metal batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Electrochemical in situ investigations of SEI and dendrite formation on the lithium metal anode
Bieker, G., Winter, M., & Bieker, P. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05865h · Cited by 777
Cited by
Designing solid-state electrolytes for safe, energy-dense batteries
Zhao, Q., Stalin, S., Zhao, C.-Z., & Archer, L. A. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0165-5 · Cited by 2,372
Interfaces and Interphases in All-Solid-State Batteries with Inorganic Solid Electrolytes
Banerjee, A., Wang, X., Fang, C., Wu, E. A., & Meng, Y. S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00101 · Cited by 1,526
Understanding interface stability in solid-state batteries
Xiao, Y., Wang, Y., Bo, S.-H., Kim, J. C., Miara, L. J., & Ceder, G. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0157-5 · Cited by 1,219
Benchmarking the performance of all-solid-state lithium batteries
Randau, S., Weber, D. A., Kötz, O., Koerver, R., Braun, P., Weber, A., Ivers-Tiffée, E., Adermann, T., Kulisch, J., Zeier, W. G., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0565-1 · Cited by 1,219
Recent Advances in Energy Chemistry between Solid-State Electrolyte and Safe Lithium-Metal Anodes
Cheng, X.-B., Zhao, C.-Z., Yao, Y.-X., Liu, H., & Zhang, Q. (2019) · Chem · doi:10.1016/j.chempr.2018.12.002 · Cited by 874
Metadata
- Authors
- Zhang, Z., Chen, S., Yang, J., Wang, J., Yao, L., Yao, X., Cui, P., & Xu, X.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-01-08
- Volume
- 10
- Issue
- 3
- Pages
- 2556-2565
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2777079733
- Cited by
- 281
- References
- 2
- FWCI
- 10.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.