The DOI matches its Crossref record.
New, Efficient, and Reliable Air Electrode Material for Proton-Conducting Reversible Solid Oxide Cells
Abstract
Driven by the demand to minimize fluctuation in common renewable energies, reversible solid oxide cells (RSOCs) have drawn increasing attention for they can operate either as fuel cells to produce electricity or as electrolysis cells to store electricity. Unfortunately, development of proton-conducting RSOCs (P-RSOCs) faces a major challenge of poor reliability because of the high content of steam involved in air electrode reactions, which could seriously decay the lifetime of air electrode materials. In this work, a very stable and efficient air electrode, SrEu 2 Fe 1.8 Co 0.2 O 7−δ (SEFC) with layer structure, is designed and deployed in P-RSOCs. X-ray diffraction analysis and High-angle annular dark-filed scanning transmission electron microscopy images of SEFC reveal that Sr atoms occupy the center of perovskite slabs, whereas Eu atoms arrange orderly in the rock-salt layer. Such a special structure of SEFC largely depresses its Lewis basicity and therefore its reactivity with steam. Applying the SEFC air electrode, our button switches smoothly between both fuel cell and electrolysis cell (EC) modes with no obvious degradation over a 135 h long-term test under wet H 2 (∼3% H 2 O) and 10% H 2 O–air atmospheres. A record of over 230 h is achieved in the long-term stability test in the EC mode, doubling the longest test that had been previously reported. Besides good stability, SEFC demonstrates great catalytic activity toward air electrode reactions when compared with traditional La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3−δ air electrodes. This research highlights the potential of stable and efficient P-RSOCs as an important part in a sustainable new energy power system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Ding, H., Wu, W., Jiang, C., Ding, Y., Bian, W., Hu, B., Singh, P., Orme, C. J., Wang, L., Zhang, Y., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-15677-z · Cited by 498
Choi, S., Davenport, T. C., & Haile, S. M. (2019) · Energy & Environmental Science · doi:10.1039/c8ee02865f · Cited by 479
Water Electrolysis toward Elevated Temperature: Advances, Challenges and Frontiers
Zhang, W., Liu, M., Gu, X., Shi, Y., Deng, Z., & Cai, N. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00573 · Cited by 441
Ruddlesden–Popper perovskites in electrocatalysis
Xu, X., Pan, Y., Zhong, Y., Ran, R., & Shao, Z. (2020) · Materials Horizons · doi:10.1039/d0mh00477d · Cited by 330
An Active and Robust Air Electrode for Reversible Protonic Ceramic Electrochemical Cells
Zhou, Y., Liu, E., Chen, Y., Liu, Y., Zhang, L., Zhang, W., Luo, Z., Kane, N., Zhao, B., Soule, L., et al. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c00432 · Cited by 284
Self-citation
Metadata
- Authors
- Huan, D., Shi, N., Zhang, L., Tan, W., Xie, Y., Wang, W., Xia, C., Peng, R., & Lu, Y.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-01-05
- Volume
- 10
- Issue
- 2
- Pages
- 1761-1770
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2777816838
- Cited by
- 194
- References
- 0
- FWCI
- 5.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: New, Efficient, and Reliable Air Electrode Material for Proton-Conducting Reversible Solid Oxide Cells. https://app.cochat.ai/papers/10.1021/acsami.7b16703
- The paper
- Huan, D., Shi, N., Zhang, L., Tan, W., Xie, Y., Wang, W., Xia, C., Peng, R., & Lu, Y. (2018). New, Efficient, and Reliable Air Electrode Material for Proton-Conducting Reversible Solid Oxide Cells. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.7b16703
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.