The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Low-Cost Carbothermal Reduction Preparation of Monodisperse Fe3O4/C Core–Shell Nanosheets for Improved Microwave Absorption
Abstract
This paper demonstrates a facile and low-cost carbothermal reduction preparation of monodisperse Fe 3 O 4 /C core–shell nanosheets (NSs) for greatly improved microwave absorption. In this protocol, the redox reaction between sheet-like hematite (α-Fe 2 O 3 ) precursors and acetone under inert atmosphere and elevated temperature generates Fe 3 O 4 /C core–shell NSs with the morphology inheriting from α-Fe 2 O 3 . Thus, Fe 3 O 4 /C core–shell NSs of different sizes ( a ) and Fe 3 O 4 /C core–shell nanopolyhedrons are obtained by using different precursors. Benefited from the high crystallinity of the Fe 3 O 4 core and the thin carbon layer, the resultant NSs exhibit high specific saturation magnetization larger than 82.51 emu·g –1 . Simultaneously, the coercivity enhances with the increase of a, suggesting a strong shape anisotropy effect. Furthermore, because of the anisotropy structure and the complementary behavior between Fe 3 O 4 and C, the as-obtained Fe 3 O 4 /C core–shell NSs exhibit strong natural magnetic resonance at a high frequency, enhanced interfacial polarization, and improved impedance matching, ensuring the enhancement of the microwave absorption. The 250 nm NSs–paraffin composites exhibit reflection loss (RL) lower than −20 dB (corresponding to 99% absorption) in a large frequency ( f ) range of 2.08–16.40 GHz with a minimum RL of −43.95 dB at f = 3.92 GHz when the thickness is tuned from 7.0 to 1.4 mm, indicating that the Fe 3 O 4 /C core–shell NSs are a good candidate to manufacture high-performance microwave absorbers. Moreover, the as-developed carbothermal reduction method could be applied for the fabrication of other composites based on ferrites and carbon.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Perspectives on Carbon Nanotubes and Graphene Raman Spectroscopy
Dresselhaus, M. S., Jorio, A., Hofmann, M., Dresselhaus, G., & Saito, R. (2010) · Nano Letters · doi:10.1021/nl904286r · Cited by 3,254
CoNi@SiO2@TiO2 and CoNi@Air@TiO2 Microspheres with Strong Wideband Microwave Absorption
Liu, Q., Cao, Q., Bi, H., Liang, C., Yuan, K., She, W., Yang, Y., & Che, R. (2016) · Advanced Materials · doi:10.1002/adma.201503149 · Cited by 1,947
Shell Thickness-Dependent Microwave Absorption of Core–Shell Fe3O4@C Composites
Du, Y., Liu, W., Qiang, R., Wang, Y., Han, X., Ma, J., & Xu, P. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502910d · Cited by 990
Sun, G., Dong, B., Cao, M., Wei, B., & Hu, C. (2011) · Chemistry of Materials · doi:10.1021/cm103441u · Cited by 981
Chen, W., Li, S., Chen, C., & Yan, L. (2011) · Advanced Materials · doi:10.1002/adma.201102838 · Cited by 876
Laminated magnetic graphene with enhanced electromagnetic wave absorption properties
Sun, X., He, J., Li, G., Tang, J., Wang, T., Guo, Y., & Xue, H. (2013) · J. Mater. Chem. C · doi:10.1039/c2tc00159d · Cited by 771
3D Graphene Foams Cross‐linked with Pre‐encapsulated Fe3O4 Nanospheres for Enhanced Lithium Storage
Wei, W., Yang, S., Zhou, H., Lieberwirth, I., Feng, X., & Müllen, K. (2013) · Advanced Materials · doi:10.1002/adma.201300445 · Cited by 754
Li, X., Feng, J., Du, Y., Bai, J., Fan, H., Zhang, H., Peng, Y., & Li, F. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05718j · Cited by 542
Li, N., Huang, G.-W., Li, Y.-Q., Xiao, H.-M., Feng, Q.-P., Hu, N., & Fu, S.-Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13142 · Cited by 517
Hybrid of MoS2 and Reduced Graphene Oxide: A Lightweight and Broadband Electromagnetic Wave Absorber
Wang, Y., Chen, D., Yin, X., Xu, P., Wu, F., & He, M. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b08410 · Cited by 394
Cited by
Dielectric Loss Mechanism in Electromagnetic Wave Absorbing Materials
Qin, M., Zhang, L., & Wu, H. (2022) · Advanced Science · doi:10.1002/advs.202105553 · Cited by 1,497
Li, Y., Liu, X., Nie, X., Yang, W., Wang, Y., Yu, R., & Shui, J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807624 · Cited by 850
Cao, M., Wang, X., Zhang, M., Shu, J., Cao, W., Yang, H., Fang, X., & Yuan, J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807398 · Cited by 827
Heterointerface Engineering in Electromagnetic Absorbers: New Insights and Opportunities
Liang, L., Gu, W., Wu, Y., Zhang, B., Wang, G., Yang, Y., & Ji, G. (2022) · Advanced Materials · doi:10.1002/adma.202106195 · Cited by 670
Zhao, H., Cheng, Y., Lv, H., Ji, G., & Du, Y. (2019) · Carbon · doi:10.1016/j.carbon.2018.10.027 · Cited by 504
Magnetic Nanostructures: Rational Design and Fabrication Strategies toward Diverse Applications
Wang, S., Xu, J., Li, W., Sun, S., Gao, S., & Hou, Y. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00370 · Cited by 129
Self-citation
Metadata
- Authors
- Liu, Y., Fu, Y., Liu, L., Li, W., Guan, J., & Tong, G.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-04-19
- Volume
- 10
- Issue
- 19
- Pages
- 16511-16520
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2802639975
- Cited by
- 276
- References
- 32
- FWCI
- 11.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.