The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Lithium Difluorophosphate as a Dendrite-Suppressing Additive for Lithium Metal Batteries
Open accessAbstract
The notorious lithium (Li) dendrites and the low Coulombic efficiency (CE) of Li anode are two major obstacles to the practical utilization of Li metal batteries (LMBs). Introducing a dendrite-suppressing additive into nonaqueous electrolytes is one of the facile and effective solutions to promote the commercialization of LMBs. Herein, Li difluorophosphate (LiPO 2 F 2, LiDFP) is used as an electrolyte additive to inhibit Li dendrite growth by forming a vigorous and stable solid electrolyte interphase film on metallic Li anode. Moreover, the Li CE can be largely improved from 84.6% of the conventional LiPF 6 -based electrolyte to 95.2% by the addition of an optimal concentration of LiDFP at 0.15 M. The optimal LiDFP-containing electrolyte can allow the Li||Li symmetric cells to cycle stably for more than 500 and 200 h at 0.5 and 1.0 mA cm –2, respectively, much longer than the control electrolyte without LiDFP additive. Meanwhile, this LiDFP-containing electrolyte also plays an important role in enhancing the cycling stability of the Li||LiNi 1/3 Co 1/3 Mn 1/3 O 2 cells with a moderately high mass loading of 9.7 mg cm –2 . These results demonstrate that LiDFP has extensive application prospects as a dendrite-suppressing additive in advanced LMBs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Self-citationYang, B., Zhang, H., Yu, L., Fan, W., & Huang, D. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.10.037 · Cited by 156
Cited by
A Growing Appreciation for the Role of LiF in the Solid Electrolyte Interphase
Tan, J., Matz, J., Dong, P., Shen, J., & Ye, M. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202100046 · Cited by 1,019
High-voltage liquid electrolytes for Li batteries: progress and perspectives
Fan, X., & Wang, C. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00450f · Cited by 980
Fluorinated Solid-Electrolyte Interphase in High-Voltage Lithium Metal Batteries
Li, T., Zhang, X.-Q., Shi, P., & Zhang, Q. (2019) · Joule · doi:10.1016/j.joule.2019.09.022 · Cited by 714
Self-citationConfronting the Challenges in Lithium Anodes for Lithium Metal Batteries
Wang, Q., Liu, B., Shen, Y., Wu, J., Zhao, Z., Zhong, C., & Hu, W. (2021) · Advanced Science · doi:10.1002/advs.202101111 · Cited by 531
Ren, W., Ding, C., Fu, X., & Huang, Y. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.10.018 · Cited by 385
Comprehensive review of lithium-ion battery materials and development challenges
Nasajpour-Esfahani, N., Garmestani, H., Bagheritabar, M., Jasim, D. J., Toghraie, D., Dadkhah, S., & Firoozeh, H. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2024.114783 · Cited by 374
Advanced Liquid Electrolytes for Rechargeable Li Metal Batteries
Jie, Y., Ren, X., Cao, R., Cai, W., & Jiao, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910777 · Cited by 330
Strategies towards enabling lithium metal in batteries: interphases and electrodes
Horstmann, B., Shi, J., Amine, R., Werres, M., He, X., Jia, H., Hausen, F., Cekic-Laskovic, I., Wiemers-Meyer, S., Lopez, J., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00767j · Cited by 298
Self-citationRecent progress on electrolyte additives for stable lithium metal anode
Li, S., Luo, Z., Li, L., Hu, J., Zou, G., Hou, H., & Ji, X. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.07.008 · Cited by 256
Shangguan, X., Xu, G., Cui, Z., Wang, Q., Du, X., Chen, K., Huang, S., Jia, G., Li, F., Wang, X., et al. (2019) · Small · doi:10.1002/smll.201900269 · Cited by 194
Metadata
- Authors
- Shi, P., Zhang, L., Xiang, H., Liang, X., Sun, Y., & Xu, W.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-06-13
- Volume
- 10
- Issue
- 26
- Pages
- 22201-22209
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2808012729
- Cited by
- 190
- References
- 3
- FWCI
- 8.28
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.