CoChat

Atomic-Layer-Deposited MoNx Thin Films on Three-Dimensional Ni Foam as Efficient Catalysts for the Electrochemical Hydrogen Evolution Reaction

Ramesh, Rahul, Nandi, Dip K., Kim, Tae Hyun, Cheon, Taehoon, Oh, Jihun, Kim, Soo-Hyun · 2019 · ACS Applied Materials & Interfaces
Cited by 65

The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.

Abstract

Future realization of a hydrogen-based economy requires a high-surface-area, low-cost, and robust electrocatalyst for the hydrogen evolution reaction (HER). In this study, the MoN x thin layer is synthesized on to a high-surface-area three-dimensional (3D) nickel foam (NF) substrate using atomic layer deposition (ALD) for HER catalysis. MoN x is grown on NF by the sequential exposure of Mo(CO) 6 and NH 3 at 225 °C. The thickness of the thin film is controlled by varying the number of ALD cycles to maximize the HER performance of the MoN x /NF composite catalyst. The scanning electron microscopy and transmission electron microscopy (TEM) images of MoN x /NF highlight that ALD facilitates uniform and conformal coating. TEM analysis highlights that the MoN x film is predominantly amorphous with the nanocrystalline MoN grains (4 nm) dispersed throughout it. Moreover, the high-resolution (HR)-TEM analysis shows a rough surface of the MoN x film with an overall composition of Mo 0.59 N 0.41 . X-ray photoelectron spectroscopy depth-profile analysis reveals that oxygen contamination is concentrated at the surface because of surface oxidation of the MoN x film under ambient conditions. The HER activity of MoN x is evaluated under acidic (0.5 M H 2 SO 4 ) and alkaline (0.1 M KOH) conditions. In an acidic electrolyte, the sample prepared with 700 ALD cycles exhibits significant HER activity and a low overpotential (η) of 148 mV at 10 mA cm –2 . Under an alkaline condition, it achieves 10 mA cm –2 with η of 125 mV for MoN x /NF (700 cycles). In both electrolytes, the MoN x thin film exhibits enhanced activity and stability because of the uniform and conformal coating on NF. Thus, this study facilitates the development of a large-area 3D freestanding catalyst for efficient electrochemical water-splitting, which may have commercial applicability.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/acsami.8b20437

Cites

10 of 10 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 10 references

Cited by

Metadata

Authors
Ramesh, R., Nandi, D. K., Kim, T. H., Cheon, T., Oh, J., & Kim, S.-H.
Venue
ACS Applied Materials & Interfaces
Published
2019-04-23
Volume
11
Issue
19
Pages
17321-17332
ISSN
  • 1944-8244 (ISSN-L)
  • 1944-8252
OpenAlex
W2940785847
Cited by
65
References
10
FWCI
1.86
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.