The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Molybdenum Trioxide (α-MoO3) Nanoribbons for Ultrasensitive Ammonia (NH3) Gas Detection: Integrated Experimental and Density Functional Theory Simulation Studies
Abstract
A highly-sensitive ammonia (NH 3 ) gas sensor based on molybdenum trioxide nanoribbons was developed in this study. α-MoO 3 nanoribbons (MoO 3 NRs) were successfully synthesized via a hydrothermal method and systematically characterized using various advanced technologies. Following a simple drop-cast process, a high-performance chemiresistive NH 3 sensor was fabricated through the deposition of a MoO 3 NR sensing film onto Au interdigitated electrodes. At an optimal operation temperature of 450 °C, the MoO 3 nanoribbon-based sensor exhibited an excellent sensitivity (0.72) at NH 3 concentration as low as 50 ppb, a fast response time of 21 s, good stability and reproducibility, and impressive selectivity against the interfering gases such as H 2, NO 2, and O 2 . More importantly, the sensor represents a remarkable limit of detection of 280 ppt (calculated based on a signal-to-noise ratio of 3), which makes the as-prepared MoO 3 NR sensor the most sensitive NH 3 sensor in the literature. Moreover, density functional theory (DFT) simulations were employed to understand the adsorption energetics and electronic structures and thus shed light on the fundamentals of sensing performance. The enhanced sensitivity for NH 3 is explicitly discussed and explained by the remarkable band structure modification because of the NH 3 adsorption at the oxygen vacancy site on α-MoO 3 nanoribbons. These results verify that hydrothermally grown MoO 3 nanoribbons are a promising sensing material for enhanced NH 3 gas monitoring.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of electrochemical ammonia production technologies and materials
Giddey, S., Badwal, S. P. S., & Kulkarni, A. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.09.054 · Cited by 886
Tsai, C., Chan, K., Abild-Pedersen, F., & Nørskov, J. K. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp01237b · Cited by 494
Cited by
Review—Non-Invasive Monitoring of Human Health by Exhaled Breath Analysis: A Comprehensive Review
Das, S., & Pal, M. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab67a6 · Cited by 466
Selectivity in Chemiresistive Gas Sensors: Strategies and Challenges
Bulemo, P. M., Kim, D.-H., Shin, H., Cho, H.-J., Koo, W.-T., Choi, S.-J., Park, C., Ahn, J., Güntner, A. T., Penner, R. M., et al. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00592 · Cited by 418
Li, G., She, C., Zhang, Y., Li, H., Liu, S., Yue, F., Jing, C., Cheng, Y., & Chu, J. (2021) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2020.128918 · Cited by 60
Metadata
- Authors
- Kwak, D., Wang, M., Koski, K. J., Zhang, L., Sokol, H., Maric, R., & Lei, Y.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-03-11
- Volume
- 11
- Issue
- 11
- Pages
- 10697-10706
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2921523283
- Cited by
- 240
- References
- 2
- FWCI
- 11.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Molybdenum Trioxide (α-MoO3) Nanoribbons for Ultrasensitive Ammonia (NH3) Gas Detection: Integrated Experimental and Density Functional Theory Simulation Studies. https://app.cochat.ai/papers/10.1021/acsami.8b20502
- The paper
- Kwak, D., Wang, M., Koski, K. J., Zhang, L., Sokol, H., Maric, R., & Lei, Y. (2019). Molybdenum Trioxide (α-MoO3) Nanoribbons for Ultrasensitive Ammonia (NH3) Gas Detection: Integrated Experimental and Density Functional Theory Simulation Studies. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.8b20502
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.