The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
4D Printing of a Liquid Crystal Elastomer with a Controllable Orientation Gradient
Abstract
Liquid crystal elastomers (LCEs), a class of soft materials capable of a large and reversible change in the shape under the trigger of external stimuli, can be fabricated into diverse architectures with complicated deformation modes through four-dimensional (4D) printing. However, the printable LCE ink is only in the form of monomeric precursors and the deformation mode is limited to contraction/extension deformation. Herein, we report a novel approach to break through these limitations. We achieved 4D printing of a single-component liquid crystal polymer ink in its isotropy state through direct ink writing (DIW) technology. The drawing force imposed by the movement of nozzle in the extruded printing process was able to align the mesogen units along the specific printing path. An orientation gradient perpendicular to the printing direction was obtained due to the existence of a temperature gradient between the two sides of printed samples and could be further fixed by post-photo-cross-linking treatment through the dimerizable groups in the LCE, realizing a new actuation mode in the field of extrusion-based printing of LCE actuators. The printed film was able to change reversibly from a strip to a tightly hollow cylinder and could reversibly lift up an object with roughly 600 times its own weight. The orientation gradient can be patterned through liquid-assistant printing or programmed structure design to integrate both bending and contraction actuation modes on the same printed sample, leading to complex deformation and two-dimensional (2D) planar porous structure to three-dimensional (3D) porous cylinder transition. This study opens up a new prospect to directly print a wide variety of LCE actuators with versatile actuation modes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Liquid crystalline elastomers as actuators and sensors
Ohm, C., Brehmer, M., & Zentel, R. (2010) · Advanced Materials · doi:10.1002/adma.200904059 · Cited by 1,169
Liquid crystal elastomers with mechanical properties of a muscle
Thomsen, D. L., Keller, P., Naciri, J., Pink, R., Jeon, H., Shenoy, D., & Ratna, B. R. (2001) · Macromolecules · doi:10.1021/ma001639q · Cited by 689
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
Four-dimensional printing of liquid crystal elastomers
Ambulo, C. P., Burroughs, J. J., Boothby, J. M., Kim, H., Shankar, M. R., & Ware, T. H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11851 · Cited by 508
4D Printed Actuators with Soft-Robotic Functions
López‐Valdeolivas, M., Liu, D., Broer, D. J., & Sánchez‐Somolinos, C. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201700710 · Cited by 371
Cited by
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Liquid Crystals: Versatile Self-Organized Smart Soft Materials
Bisoyi, H. K., & Li, Q. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00761 · Cited by 794
Projection micro stereolithography based 3D printing and its applications
Ge, Q., Li, Z., Wang, Z., Kowsari, K., Zhang, W., He, X., Zhou, J., & Fang, N. X. (2020) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ab8d9a · Cited by 444
Self-citationRyan, K. R., Down, M. P., & Banks, C. E. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126162 · Cited by 338
Direct Ink Writing Based 4D Printing of Materials and Their Applications
Wan, X., Luo, L., Liu, Y., & Leng, J. (2020) · Advanced Science · doi:10.1002/advs.202001000 · Cited by 337
Metadata
- Authors
- Zhang, C., Lu, X., Fei, G., Wang, Z., Xia, H., & Zhao, Y.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-11-06
- Volume
- 11
- Issue
- 47
- Pages
- 44774-44782
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2982988892
- Cited by
- 176
- References
- 5
- FWCI
- 12.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.