The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Modeling Effective Ionic Conductivity and Binder Influence in Composite Cathodes for All-Solid-State Batteries
Abstract
In the pursuit for future mobility, solid-state batteries open a wide field of promising battery concepts with a variety of advantages, ranging from energy density to power capability. However, trade-offs need to be addressed, especially for large-scale, cost-effective processing, which implies the use of a polymeric binder in the composite electrodes. Here, we investigate three-dimensional microstructure models of the active material, solid electrolyte, and binder to link cathode design and binder content with electrode performance. Focusing on lithium-ion transport, we evaluate the effective ionic conductivity and tortuosity in a flux-based simulation. Therein, we address the influence of electrode composition and active material particle size as well as the process-controlled design parameters of the void space and binder content. Even though added in small amounts, the latter has a strong negative influence on the ion transport paths and the active surface area. The simulation of ion transport within four-phase composites is supplemented by an estimation of the limiting current densities, illustrating that application-driven cell design starts at the microstructure level.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bruggeman, D. A. G. (1935) · Annalen der Physik · doi:10.1002/andp.19354160705 · Cited by 8,645
High-power all-solid-state batteries using sulfide superionic conductors
Kato, Y., Hori, S., Saito, T., Suzuki, K., Hirayama, M., Mitsui, A., Yonemura, M., Iba, H., & Kanno, R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.30 · Cited by 3,517
New horizons for inorganic solid state ion conductors
Zhang, Z., Shao, Y., Lotsch, B., Hu, Y.-S., Li, H., Janek, J., Nazar, L. F., Nan, C.-W., Maier, J., Armand, M., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01053f · Cited by 1,321
Self-citationBenchmarking the performance of all-solid-state lithium batteries
Randau, S., Weber, D. A., Kötz, O., Koerver, R., Braun, P., Weber, A., Ivers-Tiffée, E., Adermann, T., Kulisch, J., Zeier, W. G., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0565-1 · Cited by 1,219
Self-citationSulfide Solid Electrolyte with Favorable Mechanical Property for All-Solid-State Lithium Battery
Sakuda, A., Hayashi, A., & Tatsumisago, M. (2013) · Scientific Reports · doi:10.1038/srep02261 · Cited by 1,051
Koerver, R., Aygün, I., Leichtweiß, T., Dietrich, C., Zhang, W., Binder, J. O., Hartmann, P., Zeier, W. G., & Janek, J. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00931 · Cited by 1,020
Self-citationMercury Porosimetry: A General (Practical) Overview
Giesche, H. (2006) · Particle & Particle Systems Characterization · doi:10.1002/ppsc.200601009 · Cited by 916
Koerver, R., Zhang, W., de Biasi, L., Schweidler, S., Kondrakov, A. O., Kolling, S., Brezesinski, T., Hartmann, P., Zeier, W. G., & Janek, J. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00907d · Cited by 872
Self-citationTortuosity Determination of Battery Electrodes and Separators by Impedance Spectroscopy
Landesfeind, J., Hattendorff, J., Ehrl, A., Wall, W. A., & Gasteiger, H. A. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.1141607jes · Cited by 731
Critical review of the impact of tortuosity on diffusion
Shen, L., & Chen, Z. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2007.03.041 · Cited by 704
All-solid-state lithium-ion and lithium metal batteries – paving the way to large-scale production
Schnell, J., Günther, T., Knoche, T., Vieider, C., Köhler, L., Just, A., Keller, M., Passerini, S., & Reinhart, G. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.02.062 · Cited by 646
Haruyama, J., Sodeyama, K., Han, L., Takada, K., & Tateyama, Y. (2014) · Chemistry of Materials · doi:10.1021/cm5016959 · Cited by 605
Quantifying tortuosity in porous Li-ion battery materials
Thorat, I. V., Stephenson, D. E., Zacharias, N. A., Zaghib, K., Harb, J. N., & Wheeler, D. R. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.12.032 · Cited by 571
Tortuosity Anisotropy in Lithium‐Ion Battery Electrodes
Ebner, M., Chung, D., García, R. E., & Wood, V. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301278 · Cited by 495
Interfacial Challenges in Solid-State Li Ion Batteries
Luntz, A. C., Voss, J., & Reuter, K. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02352 · Cited by 461
Computational Screening of Cathode Coatings for Solid-State Batteries
Xiao, Y., Miara, L. J., Wang, Y., & Ceder, G. (2019) · Joule · doi:10.1016/j.joule.2019.02.006 · Cited by 451
Elastic Properties of Alkali Superionic Conductor Electrolytes from First Principles Calculations
Deng, Z., Wang, Z., Chu, I.-H., Luo, J., & Ong, S. P. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0061602jes · Cited by 406
Fast Charging Lithium Batteries: Recent Progress and Future Prospects
Zhu, G., Zhao, C., Huang, J., He, C., Zhang, J., Chen, S., Xu, L., Yuan, H., & Zhang, Q. (2019) · Small · doi:10.1002/smll.201805389 · Cited by 395
Nam, Y. J., Oh, D. Y., Jung, S. H., & Jung, Y. S. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.11.031 · Cited by 390
Electrode manufacturing for lithium-ion batteries—Analysis of current and next generation processing
Hawley, W. B., & Li, J. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.100862 · Cited by 374
Kim, D. H., Oh, D. Y., Park, K. H., Choi, Y. E., Nam, Y. J., Lee, H. A., Lee, S.-M., & Jung, Y. S. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00330 · Cited by 359
Culver, S. P., Koerver, R., Zeier, W. G., & Janek, J. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900626 · Cited by 342
Self-citationHigh Active Material Loading in All‐Solid‐State Battery Electrode via Particle Size Optimization
Shi, T., Tu, Q. H., Tian, Y., Xiao, Y., Miara, L. J., Kononova, O., & Ceder, G. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902881 · Cited by 338
Impact of Cathode Material Particle Size on the Capacity of Bulk-Type All-Solid-State Batteries
Strauss, F., Bartsch, T., de Biasi, L., Kim, A.-Y., Janek, J., Hartmann, P., & Brezesinski, T. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00275 · Cited by 334
Self-citationTsai, P.-C., Wen, B., Wolfman, M., Choe, M.-J., Pan, M. S., Su, L., Thornton, K., Cabana, J., & Chiang, Y.-M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00001h · Cited by 325
Shen, Z. J., Cao, L., Rahn, C. D., et al. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.084310jes · Cited by 323
Landesfeind, J., & Gasteiger, H. A. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0571912jes · Cited by 317
Hippauf, F., Schumm, B., Doerfler, S., Althues, H., Fujiki, S., Shiratsuchi, T., Tsujimura, T., Aihara, Y., & Kaskel, S. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.05.033 · Cited by 309
Dynamic Visualization of the Electric Potential in an All‐Solid‐State Rechargeable Lithium Battery
Yamamoto, K., Iriyama, Y., Asaka, T., Hirayama, T., Fujita, H., Fisher, C. A. J., Nonaka, K., Sugita, Y., & Ogumi, Z. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200907319 · Cited by 307
Tortuosity in electrochemical devices: a review of calculation approaches
Tjaden, B., Brett, D. J. L., & Shearing, P. R. (2018) · International Materials Reviews · doi:10.1080/09506608.2016.1249995 · Cited by 278
Microstructural Modeling of Composite Cathodes for All-Solid-State Batteries
Bielefeld, A., Weber, D. A., & Janek, J. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b11043 · Cited by 278
Self-citationLi, X., Ren, Z., Norouzi Banis, M., Deng, S., Zhao, Y., Sun, Q., Wang, C., Yang, X., Li, W., Liang, J., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b01676 · Cited by 263
Hybrid electrolytes for lithium metal batteries
Keller, M., Varzi, A., & Passerini, S. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.099 · Cited by 242
Dewald, G. F., Ohno, S., Kraft, M. A., Koerver, R., Till, P., Vargas-Barbosa, N. M., Janek, J., & Zeier, W. G. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b01550 · Cited by 236
Self-citationAll-Solid-State Batteries with Thick Electrode Configurations
Kato, Y., Shiotani, S., Morita, K., Suzuki, K., Hirayama, M., & Kanno, R. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b02880 · Cited by 234
Oh, D. Y., Nam, Y. J., Park, K. H., Jung, S. H., Kim, K. T., Ha, A. R., & Jung, Y. S. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802927 · Cited by 217
Bauer, W., Nötzel, D., Wenzel, V., & Nirschl, H. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.04.081 · Cited by 204
Synthesis of Single Crystal LiNi0.5Mn0.3Co0.2O2for Lithium Ion Batteries
Li, J., Li, H., Stone, W., Weber, R., Hy, S., & Dahn, J. R. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0401714jes · Cited by 204
Ates, T., Keller, M., Kulisch, J., Adermann, T., & Passerini, S. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.11.011 · Cited by 184
Culver, S. P., Koerver, R., Krauskopf, T., & Zeier, W. G. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b01293 · Cited by 171
Landesfeind, J., Ebner, M., Eldiven, A., Wood, V., & Gasteiger, H. A. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0231803jes · Cited by 170
Oh, D. Y., Kim, D. H., Jung, S. H., Han, J., Choi, N., & Jung, Y. S. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta06873e · Cited by 154
Siroma, Z., Sato, T., Takeuchi, T., Nagai, R., Ota, A., & Ioroi, T. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.03.059 · Cited by 146
The influence of void space on ion transport in a composite cathode for all-solid-state batteries
Hlushkou, D., Reising, A. E., Kaiser, N., Spannenberger, S., Schlabach, S., Kato, Y., Roling, B., & Tallarek, U. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.06.041 · Cited by 136
Trembacki, B. L., Mistry, A. N., Noble, D. R., Ferraro, M. E., Mukherjee, P. P., & Roberts, S. A. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0981813jes · Cited by 136
Finsterbusch, M., Danner, T., Tsai, C., Uhlenbruck, S., Latz, A., & Guillon, O. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b06705 · Cited by 130
Slurry-Based Processing of Solid Electrolytes: A Comparative Binder Study
Riphaus, N., Strobl, P., Stiaszny, B., Zinkevich, T., Yavuz, M., Schnell, J., Indris, S., Gasteiger, H. A., & Sedlmaier, S. J. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0961816jes · Cited by 128
Wang, C., Li, X., Zhao, Y., Banis, M. N., Liang, J., Li, X., Sun, Y., Adair, K. R., Sun, Q., Liu, Y., et al. (2019) · Small Methods · doi:10.1002/smtd.201900261 · Cited by 123
Nakamura, T., Amezawa, K., Kulisch, J., Zeier, W. G., & Janek, J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b03053 · Cited by 118
Self-citationDietrich, C., Koerver, R., Gaultois, M. W., Kieslich, G., Cibin, G., Janek, J., & Zeier, W. G. (2018) · Physical Chemistry Chemical Physics · doi:10.1039/c8cp01968a · Cited by 111
Self-citationEffect of Microstructure on the Ionic Conductivity of an All Solid-State Battery Electrode
Froböse, L., van der Sichel, J. F., Loellhoeffel, T., Helmers, L., & Kwade, A. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0601902jes · Cited by 110
Assessment of all-solid-state lithium-ion batteries
Braun, P., Uhlmann, C., Weiss, M., Weber, A., & Ivers‐Tiffée, E. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.111 · Cited by 75
Almar, L., Joos, J., Weber, A., & Ivers‐Tiffée, E. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.04.019 · Cited by 73
Wiegmann, A., & Zemitis, A. (2006) · Fraunhofer-Publica (Fraunhofer-Gesellschaft) · doi:10.24406/publica-fhg-292970 · Cited by 65
Cited by
Physicochemical Concepts of the Lithium Metal Anode in Solid-State Batteries
Krauskopf, T., Richter, F. H., Zeier, W. G., & Janek, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00431 · Cited by 892
Self-citationVadhva, P., Hu, J., Johnson, M. J., Stocker, R., Braglia, M., Brett, D. J. L., & Rettie, A. J. E. (2021) · ChemElectroChem · doi:10.1002/celc.202100108 · Cited by 531
Metadata
- Authors
- Bielefeld, A., Weber, D. A., & Janek, J.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-02-25
- Volume
- 12
- Issue
- 11
- Pages
- 12821-12833
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W3007943548
- Cited by
- 266
- References
- 54
- FWCI
- 10.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.