The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Iron–Carbon Hybrid Magnetic Nanosheets for Adsorption-Removal of Organic Dyes and 4-Nitrophenol from Aqueous Solution
Abstract
Here, we report a nonprecious mesoporous adsorbent obtained from the carbonization of bagasse. The material shows an impressive pH-dependent adsorbent property for cationic, anionic, and commercially used dyes along with an organic contaminant (4-nitrophenol) in water. The adsorbent shows specific surface area of ∼462 m 2 g –1 and the porous layered structure as confirmed by gas adsorption and microscopic techniques, respectively. Further, pH triggered adsorption of methylene blue (MB, cationic dye), Congo red (CR, anionic dye), and commercial hair dye were studied. The results show >96% adsorption for CR and MB within 24 min at pH 2 and pH 8, respectively. Moreover, fast adsorption response, 92.6% in 20 min, was obtained for a commercially used hair dye and demonstrates the practical applicability of the material for wastewater remediation. Under experimental conditions, adsorbent shows ultrafast adsorption kinetics (4 min to achieve equilibrium state with 99.5% adsorption) for 4-nitrophenol from water. Notably, the adsorbent shows structural stability, easily separable with an external magnetic field, and recyclability with ∼85% efficiency even after the fifth cycle.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
From dead leaves to high energy density supercapacitors
Biswal, M., Banerjee, A., Deo, M., & Ogale, S. (2013) · Energy & Environmental Science · doi:10.1039/c3ee22325f · Cited by 903
Brown, M. A., & De Vito, S. C. (1993) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389309388453 · Cited by 765
Lei, C., Zhu, X., Zhu, B., Jiang, C., Le, Y., & Yu, J. (2017) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.09.070 · Cited by 507
Zhu, X., Liu, Y., Qian, F., Zhou, C., Zhang, S., & Chen, J. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2013.12.019 · Cited by 413
Guo, S., Zhang, G., Guo, Y., & Yu, J. C. (2013) · Carbon · doi:10.1016/j.carbon.2013.04.058 · Cited by 383
Lingamdinne, L. P., Koduru, J. R., & Karri, R. R. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.10.063 · Cited by 366
Chatterjee, S., Lee, D. S., Lee, M. W., & Woo, S. H. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2008.12.035 · Cited by 363
Cazetta, A. L., Pezoti, O., Bedin, K. C., Silva, T. L., Paesano Junior, A., Asefa, T., & Almeida, V. C. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01141 · Cited by 312
Pezoti, O., Cazetta, A. L., Souza, I. P. A. F., Bedin, K. C., Martins, A. C., Silva, T. L., & Almeida, V. C. (2014) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.02.007 · Cited by 261
Xing, R., Wang, W., Jiao, T., Ma, K., Zhang, Q., Hong, W., Qiu, H., Zhou, J., Zhang, L., & Peng, Q. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b00343 · Cited by 254
Zhou, L., Shao, Y., Liu, J., Ye, Z., Zhang, H., Ma, J., Jia, Y., Gao, W., & Li, Y. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500576p · Cited by 245
Attallah, O. A., Al-Ghobashy, M. A., Nebsen, M., & Salem, M. Y. (2016) · RSC Advances · doi:10.1039/c5ra23452b · Cited by 243
Liu, B., Yang, F., Zou, Y., & Peng, Y. (2014) · Journal of Chemical & Engineering Data · doi:10.1021/je4010239 · Cited by 243
Wen, T., Wang, J., Yu, S., Chen, Z., Hayat, T., & Wang, X. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b00418 · Cited by 227
Sharma, P., Hussain, N., Borah, D. J., & Das, M. R. (2013) · Journal of Chemical & Engineering Data · doi:10.1021/je400743r · Cited by 211
Adsorptive amputation of hazardous azo dye Congo red from wastewater: a critical review
Raval, N. P., Shah, P. U., & Shah, N. K. (2016) · Environmental Science and Pollution Research · doi:10.1007/s11356-016-6970-0 · Cited by 202
Han, S., Liu, K., Hu, L., Teng, F., Yu, P., & Zhu, Y. (2017) · Scientific Reports · doi:10.1038/srep43599 · Cited by 202
Current Trends in the Chemistry of Permanent Hair Dyeing
Morel, O. J. X., & Christie, R. M. (2011) · Chemical Reviews · doi:10.1021/cr1000145 · Cited by 183
High saturation magnetization of γ-Fe2O3 nano-particles by a facile one-step synthesis approach
Cao, D., Li, H., Pan, L., Li, J., Wang, X., Jing, P., Cheng, X., Wang, W., Wang, J., & Liu, Q. (2016) · Scientific Reports · doi:10.1038/srep32360 · Cited by 180
Karan, C. K., & Bhattacharjee, M. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b09831 · Cited by 169
Liu, L., Zhang, B., Zhang, Y., He, Y., Huang, L., Tan, S., & Cai, X. (2015) · Journal of Chemical & Engineering Data · doi:10.1021/je5009312 · Cited by 163
Bai, L., Li, Z., Zhang, Y., Wang, T., Lu, R., Zhou, W., Gao, H., & Zhang, S. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.05.068 · Cited by 160
Ultrafast Dye Removal Using Ionic Liquid–Graphene Oxide Sponge
Zambare, R. S., Song, X., Bhuvana, S., Selvaraj, A. P. J., & Nemade, P. R. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b00867 · Cited by 160
Graphene composites as dye adsorbents: Review
Kyzas, G. Z., Deliyanni, E. A., Bikiaris, D. N., & Mitropoulos, A. C. (2018) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2017.11.006 · Cited by 158
Salehi, G., Abazari, R., & Mahjoub, A. R. (2018) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.8b01636 · Cited by 146
Ranjithkumar, V., Sangeetha, S. V., & Vairam, S. (2014) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.03.034 · Cited by 143
Kim, S., & Choi, P. (2017) · Dalton Transactions · doi:10.1039/c7dt02076g · Cited by 129
RGO-MoS2 Supported NiCo2O4 Catalyst toward Solar Water Splitting and Dye Degradation
Chakrabarty, S., Mukherjee, A., & Basu, S. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b04757 · Cited by 124
Khare, P., Singh, A., Verma, S., Bhati, A., Sonker, A. K., Tripathi, K. M., & Sonkar, S. K. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02929 · Cited by 113
Self-citationCui, Z., Zhang, X., Liu, S., Zhou, L., Li, W., & Zhang, J. (2018) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.8b01319 · Cited by 108
Horikoshi, S., Hojo, F., Hidaka, H., & Serpone, N. (2004) · Environmental Science & Technology · doi:10.1021/es034823a · Cited by 106
Chen, L., Ji, T., Mu, L., Shi, Y., Brisbin, L., Guo, Z., Khan, M. A., Young, D. P., & Zhu, J. (2015) · RSC Advances · doi:10.1039/c5ra19616g · Cited by 105
Luo, J., Gao, Y., Tan, K., Wei, W., & Liu, X. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00367 · Cited by 94
Boruah, P. K., Szunerits, S., Boukherroub, R., & Das, M. R. (2017) · Chemosphere · doi:10.1016/j.chemosphere.2017.10.075 · Cited by 92
Magnetite/Polymer Brush Nanocomposites with Switchable Uptake Behavior Toward Methylene Blue
Dolatkhah, A., & Wilson, L. D. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11599 · Cited by 89
Lin, K. A., & Lee, W.-D. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.11.108 · Cited by 84
Hierarchically porous NiO–Al 2 O 3 nanocomposite with enhanced Congo red adsorption in water
Lei, C., Zhu, X., Le, Y., Zhu, B., Yu, J., & Ho, W. (2016) · RSC Advances · doi:10.1039/c5ra23545f · Cited by 81
Álvarez-Torrellas, S., Martin-Martinez, M., Gomes, H. T., Ovejero, G., & García, J. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.04.054 · Cited by 80
Chatterjee, S., Tran, H. N., Ohemeng‐Boahen, G., & Woo, S. H. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03929 · Cited by 80
Sarkar, A. K., Bediako, J. K., Choi, J.-W., & Yun, Y. (2019) · NPG Asia Materials · doi:10.1038/s41427-018-0104-8 · Cited by 79
Dhanavel, S., Nivethaa, E. A. K., Dhanapal, K., Gupta, V. K., Narayanan, V., & Stephen, A. (2016) · RSC Advances · doi:10.1039/c6ra02576e · Cited by 75
Liu, X., Xiao, Z., Xu, J., Xu, W., Sang, P., Zhao, L., Zhu, H., Sun, D., & Guo, W. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta02908f · Cited by 74
Du, Z., Zhang, Y., Li, Z., Chen, H., Wang, Y., Wang, G., Zou, P., Chen, H., & Zhang, Y. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.09.050 · Cited by 72
Lee, I., Kang, S., Jang, S.-C., Lee, G.-W., Shim, H. E., Rethinasabapathy, M., Roh, C., & Huh, Y. S. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta10250c · Cited by 71
Kundu, S., Chowdhury, I. H., & Naskar, M. K. (2018) · Journal of Chemical & Engineering Data · doi:10.1021/acs.jced.7b00745 · Cited by 65
Ma, J., Ma, Y., & Yu, F. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b04668 · Cited by 64
Zan, F. L., Ma, Y., Ma, Q., Zheng, G. H., Dai, Z., Wu, M., Li, G., Sun, Z., & Chen, X. S. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.11.120 · Cited by 63
Guo, M., Song, M., Li, S., Yin, Z., Song, X., & Bu, Y. (2017) · CrystEngComm · doi:10.1039/c7ce00360a · Cited by 50
Dai, J., Tian, S., Jiang, Y., Chang, Z., Xie, A., Zhang, R., Li, C., & Yan, Y. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b05300 · Cited by 50
Aboelfetoh, E. F., El‐Helaly, A. A., & Gemeay, A. H. (2017) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2017.12.047 · Cited by 43
Fabrication of a novel magnetic carbon nanocomposite adsorbent via pyrolysis of sugar
Cho, D.-W., Lee, J., Ok, Y. S., Kwon, E. E., & Song, H. (2016) · Chemosphere · doi:10.1016/j.chemosphere.2016.08.025 · Cited by 39
Polepalli, S., & Rao, C. P. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b04138 · Cited by 37
Sarkar, A. K., Saha, A., Panda, A. B., & Pal, S. (2015) · Chemical Communications · doi:10.1039/c5cc06214d · Cited by 36
Zhang, X., Qin, C., Gong, Y., Song, Y., Zhang, G., Chen, R., Gao, Y., Xiao, L., & Jia, S. (2019) · RSC Advances · doi:10.1039/c8ra09438a · Cited by 36
Gu, X., Han, K., Li, H., Liu, X., Dong, F., Fu, M., & Chen, J. (2018) · Journal of Chemical & Engineering Data · doi:10.1021/acs.jced.8b00477 · Cited by 35
Mruthunjayappa, M. H., Chakraborty, S., Aruchamy, K., Ghosh, D., Singh, N., Prasad, K., Kalpana, D., Nataraj, S. K., & Mondal, D. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta00006b · Cited by 28
Shape-controlled synthesis of α-Fe 2 O 3 nanocrystals for efficient adsorptive removal of Congo red
Wang, J., Xu, L., Zhang, Z., Sun, P., Fang, M., & Liu, H. (2015) · RSC Advances · doi:10.1039/c5ra06324h · Cited by 15
Elhaddaoui, A., Merlin, J.-C., Delacourte, A., & Turrell, S. (1992) · Journal of Molecular Structure · doi:10.1016/0022-2860(92)87018-q · Cited by 14
Mitra, J., Saxena, M., Paul, N., Saha, E., Sarkar, R., & Sarkar, S. (2018) · New Journal of Chemistry · doi:10.1039/c8nj01899e · Cited by 5
Self-citation
Cited by
Recent advances on the removal of dyes from wastewater using various adsorbents: a critical review
Dutta, S., Gupta, B., Srivastava, S. K., & Gupta, A. K. (2021) · Materials Advances · doi:10.1039/d1ma00354b · Cited by 1,296
Self-citationDistinct Approaches of Removal of Dyes from Wastewater: A Review
Bal, G., & Thakur, A. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.09.119 · Cited by 285
Abdullah, F. H., Bakar, N. H. H. A., & Bakar, M. A. (2022) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.127416 · Cited by 264
Adsorptive removal of heavy metals, dyes, and pharmaceuticals: Carbon-based nanomaterials in focus
Thakur, A., Kumar, A., & Singh, A. (2024) · Carbon · doi:10.1016/j.carbon.2023.118621 · Cited by 192
Self-citationGraphene-Based Membranes for Water and Wastewater Treatment: A Review
Bhol, P., Yadav, S., Altaee, A., Saxena, M., Misra, P. K., & Samal, A. K. (2021) · ACS Applied Nano Materials · doi:10.1021/acsanm.0c03439 · Cited by 160
Self-citation
Metadata
- Authors
- Manippady, S. R., Singh, A., Basavaraja, B. M., Samal, A. K., Srivastava, S., & Saxena, M.
- Affiliations
- Jain University (IN)
- Indian Institute of Technology Kanpur (IN)
- Centre for Nano and Material Sciences, Jain University, Ramanagaram, Bangalore-562112, Karnataka, India
- Indian Institute of Science Bangalore (IN)
- Corresponding author
- Saxena, Manav
- ORCID
- Venue
- ACS Applied Nano Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-01-08
- Volume
- 3
- Issue
- 2
- Pages
- 1571-1582
- ISSN
- 2574-0970 (ISSN-L)
- OpenAlex
- W3000430953
- Cited by
- 98
- References
- 59
- Citations by year
- 2026: 7 · 2025: 10 · 2024: 12 · 2023: 18 · 2022: 19 · 2021: 24 · 2020: 8
- FWCI
- 5.29
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Applied Nano Materials (publishedVersion)
- NOT FOUND REPOSITORY (Indian Institute of Science Bangalore) (acceptedVersion)
- Funders
- Science and Engineering Research Board (EMR/2017/003368)
- Topics
- Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
- Physical Sciences › Environmental Science › Environmental Engineering › Environmental remediation with nanomaterials
- Physical Sciences › Materials Science › Materials Chemistry › Mesoporous Materials and Catalysis
- Keywords
- magnetic adsorbent, mesoporous carbon, dye adsorption, methylene blue, Congo red, hair dyes, pH effect on adsorption, adsorption kinetics, adsorbent reusability, wastewater remediation, water treatment
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.