CoChat

Impact of Dispersion Solvent on Ionomer Thin Films and Membranes

Open access

The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.

Abstract

Perfluorosulfonic acid (PFSA) ionomers are an important class of materials that many electrochemical devices rely on as their ion-conducting electrolyte. Often, PFSA films are prepared through solution-processing techniques. Previous research has demonstrated that the solvent environment affects PFSA dispersion conformation, but it is not clear to what extent (if at all) these conformational effects persist for thin films and membranes upon casting, nor how dispersion solvent impacts film formation during the drying process. Here, we explore these questions by systematically examining the effect of water and n -propanol mixtures on PFSA thin-film formation and structure, membrane structure, and resulting properties. Using a combination of in situ, time-resolved grazing incidence X-ray scattering and tender wide-angle X-ray scattering, it is shown that films prepared from high-water-concentration dispersions exhibit stronger interactions and arrangement upon drying, and possess larger network domain sizes than those prepared from low-water-concentration dispersions. These stronger interactions likely manifest in greater network connectivity, as evidenced by enhanced conductivity for membranes and decreased water uptake for thin films. Significantly, these solvent-induced differences persist even after thermal annealing. It is clear that the dispersion solvent choice is a critical parameter controlling PFSA nano- and mesoscale structure and presents an important dial with which to direct PFSA macroscale properties.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/acsapm.0c01076

Cites

53 of 53 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 53 references

Cited by

See all 65

Metadata

Authors
Berlinger, S. A., Dudenas, P. J., Bird, A., Chen, X., Freychet, G., McCloskey, B. D., Kusoglu, A., & Weber, A. Z.
Affiliations
  • Lawrence Berkeley National Laboratory (US)
  • Brookhaven National Laboratory (US)
  • University of California, Berkeley (US)
Corresponding author
Berlinger, Sarah A.
Venue
ACS Applied Polymer Materials
Published
2020-11-23
Volume
2
Issue
12
Pages
5824-5834
ISSN
2637-6105 (ISSN-L)
OpenAlex
W3108038154
Cited by
65
References
53
Citations by year
2026: 5 · 2025: 14 · 2024: 11 · 2023: 14 · 2022: 10 · 2021: 11
FWCI
3.01
Type
journal article
Language
en
Open access
Locations
  • ACS Applied Polymer Materials (publishedVersion)
  • OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
  • eScholarship (California Digital Library) (submittedVersion)
Funders
  • Division of Graduate Education (DGE 1752814)
  • Fuel Cell Technologies Office (DE-AC02-05CH1123)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
  • Physical Sciences › Chemical Engineering › Filtration and Separation › Membrane Separation and Gas Transport
Keywords
perfluorosulfonic acid ionomer, thin films, ion exchange membranes, drying, network connectivity, ionic conductivity, water absorption, annealing, mesoscale structure

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.