The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Polarons, Bipolarons, And Absorption Spectroscopy of PEDOT
Abstract
Electronic structure and optical absorption spectra of poly(3,4-ethylenedioxythiophene) (PEDOT) for different oxidation levels were studied using density functional theory (DFT) and time-dependent DFT. It is shown, that the DFT-based predictions for the polaronic and bipolaronic states and the nature of corresponding optical transitions are qualitatively different from the widely used traditional picture based on semi-empirical pre-DFT approaches that still dominate the current literature. On the basis of the results of our calculations, the experimental Vis/NIR absorbance spectroscopy and the electron paramagnetic resonance spectroscopy are re-examined, and a new interpretation of the measured spectra and the spin signal, which is qualitatively different from the traditional interpretation, is provided. The findings and conclusions concerning the nature of polaronic and bipolaronic states, band structure and absorption spectra presented for PEDOT, are generic for a wide class of conducting polymers (such as polythiophenes and their derivatives) that have a similar structure of monomer units.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Semiempirical GGA‐type density functional constructed with a long‐range dispersion correction
Grimme, S. (2006) · Journal of Computational Chemistry · doi:10.1002/jcc.20495 · Cited by 31,038
Long-range corrected hybrid density functionals with damped atom–atom dispersion corrections
Chai, J.-D., & Head-Gordon, M. (2008) · Physical Chemistry Chemical Physics · doi:10.1039/b810189b · Cited by 14,648
Handbook of conducting polymers
Skotheim, T. A., Elsenbaumer, R. L., & Reynolds, J. R. (1986) · M. Dekker eBooks · Cited by 8,079
Insights into Current Limitations of Density Functional Theory
Cohen, A. J., Mori-Sánchez, P., & Yang, W. (2008) · Science · doi:10.1126/science.1158722 · Cited by 2,527
Organic electrochemical transistors
Rivnay, J., Inal, S., Salleo, A., Owens, R. M., Berggren, M., & Malliaras, G. G. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.86 · Cited by 2,065
Self-citationBubnova, O., Khan, Z. U., Malti, A., Braun, S., Fahlman, M., Berggren, M., & Crispin, X. (2011) · Nature Materials · doi:10.1038/nmat3012 · Cited by 1,769
Self-citationPerspective on density functional theory
Burke, K. (2012) · The Journal of Chemical Physics · doi:10.1063/1.4704546 · Cited by 1,676
Electronic structure of quantum dots
Reimann, S. M., & Manninen, M. (2002) · Reviews of Modern Physics · doi:10.1103/revmodphys.74.1283 · Cited by 1,380
Bredas, J.-L. (2014) · Mater. Horiz. · doi:10.1039/c3mh00098b · Cited by 1,140
Bubnova, O., Khan, Z. U., Wang, H., Braun, S., Evans, D. R., Fabretto, M., Hojati-Talemi, P., Dagnelund, D., Arlin, J.-B., Geerts, Y. H., et al. (2014) · Nature Materials · doi:10.1038/nmat3824 · Cited by 854
Self-citationPEDOT: Principles and Applications of an Intrinsically Conductive Polymer
Elschner, A., Kirchmeyer, S., Lovenich, W., Merker, U., & Reuter, K. (2010) · CRC Press eBooks · doi:10.1201/b10318 · Cited by 758
Organic Bioelectronics: Bridging the Signaling Gap between Biology and Technology
Simon, D. T., Gabrielsson, E. O., Tybrandt, K., & Berggren, M. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00146 · Cited by 568
Self-citationConducting Polymers for Pseudocapacitive Energy Storage
Bryan, A. M., Santino, L. M., Lu, Y., Acharya, S., & D’Arcy, J. M. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01762 · Cited by 559
Polythiophene: From Fundamental Perspectives to Applications
Kaloni, T. P., Giesbrecht, P. K., Schreckenbach, G., & Freund, M. S. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b03035 · Cited by 454
Understanding the Capacitance of PEDOT:PSS
Volkov, A. V., Wijeratne, K., Mitraka, E., Ail, U., Zhao, D., Tybrandt, K., Andreasen, J. W., Berggren, M., Crispin, X., & Zozoulenko, I. V. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700329 · Cited by 440
Self-citationPEDOT Nanocrystal in Highly Conductive PEDOT:PSS Polymer Films
Takano, T., Masunaga, H., Fujiwara, A., Okuzaki, H., & Sasaki, T. (2012) · Macromolecules · doi:10.1021/ma300120g · Cited by 426
Active Materials for Organic Electrochemical Transistors
Zeglio, E., & Inganäs, O. (2018) · Advanced Materials · doi:10.1002/adma.201800941 · Cited by 333
Perspective: Kohn-Sham density functional theory descending a staircase
Yu, H. S., Li, S. L., & Truhlar, D. G. (2016) · The Journal of Chemical Physics · doi:10.1063/1.4963168 · Cited by 317
An Organic Mixed Ion–Electron Conductor for Power Electronics
Malti, A., Edberg, J., Granberg, H., Khan, Z. U., Andreasen, J. W., Liu, X., Zhao, D., Zhang, H., Yao, Y., Brill, J. W., et al. (2016) · Advanced Science · doi:10.1002/advs.201500305 · Cited by 264
Self-citationSonmez, G. (2005) · Chemical Communications · doi:10.1039/b510230h · Cited by 261
Salzner, U., & Aydin, A. (2011) · Journal of Chemical Theory and Computation · doi:10.1021/ct2003447 · Cited by 260
Shi, W., Zhao, T., Xi, J., Wang, D., & Shuai, Z. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06584 · Cited by 209
Doping‐Induced Absorption Bands in P3HT: Polarons and Bipolarons
Enengl, C., Enengl, S., Pluczyk, S., Havlicek, M., Lapkowski, M., Neugebauer, H., & Ehrenfreund, E. (2016) · ChemPhysChem · doi:10.1002/cphc.201600961 · Cited by 171
Chemical potential–electric double layer coupling in conjugated polymer–polyelectrolyte blends
Tybrandt, K., Zozoulenko, I. V., & Berggren, M. (2017) · Science Advances · doi:10.1126/sciadv.aao3659 · Cited by 164
Self-citationJacquemin, D., Moore, B., Planchat, A., Adamo, C., & Autschbach, J. (2014) · Journal of Chemical Theory and Computation · doi:10.1021/ct5000617 · Cited by 156
Low‐Dimensional Conduction Mechanisms in Highly Conductive and Transparent Conjugated Polymers
Ugur, A., Katmis, F., Li, M., Wu, L., Zhu, Y., Varanasi, K. K., & Gleason, K. K. (2015) · Advanced Materials · doi:10.1002/adma.201502340 · Cited by 125
Electrocatalytic Production of Hydrogen Peroxide with Poly(3,4‐ethylenedioxythiophene) Electrodes
Mitraka, E., Gryszel, M., Vagin, M. Y., Jafari, M. J., Singh, A., Warczak, M., Mitrakas, M. G., Magnus Berggren, A., Ederth, T., Zozoulenko, I. V., et al. (2018) · Advanced Sustainable Systems · doi:10.1002/adsu.201800110 · Cited by 103
Self-citationSalzner, U. (2014) · Wiley Interdisciplinary Reviews Computational Molecular Science · doi:10.1002/wcms.1194 · Cited by 92
Molecular Dynamics Study of Morphology of Doped PEDOT: From Solution to Dry Phase
Franco‐Gonzalez, J. F., & Zozoulenko, I. V. (2017) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.7b01510 · Cited by 84
Self-citationMorphology and ion diffusion in PEDOT:Tos. A coarse grained molecular dynamics simulation
Modarresi, M., Franco‐Gonzalez, J. F., & Zozoulenko, I. V. (2018) · Physical Chemistry Chemical Physics · doi:10.1039/c8cp02902d · Cited by 70
Self-citationWei, Q., Mukaida, M., Kirihara, K., Naitoh, Y., & Ishida, T. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10453 · Cited by 48
Cited by
A solution-processed n-type conducting polymer with ultrahigh conductivity
Tang, H., Liang, Y., Liu, C., Hu, Z., Deng, Y., Guo, H., Yu, Z., Song, A., Zhao, H., Zhao, D., et al. (2022) · Nature · doi:10.1038/s41586-022-05295-8 · Cited by 501
Moser, M., Hidalgo, T. C., Surgailis, J., Gladisch, J., Ghosh, S., Sheelamanthula, R., Thiburce, Q., Giovannitti, A., Salleo, A., Gasparini, N., et al. (2020) · Advanced Materials · doi:10.1002/adma.202002748 · Cited by 329
Self-citationCea, C., Spyropoulos, G. D., Jastrzebska-Perfect, P., Ferrero, J. J., Gelinas, J. N., & Khodagholy, D. (2020) · Nature Materials · doi:10.1038/s41563-020-0638-3 · Cited by 292
3D Printable Conducting and Biocompatible PEDOT‐graft‐PLA Copolymers by Direct Ink Writing
Dominguez‐Alfaro, A., Gabirondo, E., Alegret, N., De León‐Almazán, C. M., Hernandez, R., Vallejo‐Illarramendi, A., Prato, M., & Mecerreyes, D. (2021) · Macromolecular Rapid Communications · doi:10.1002/marc.202100100 · Cited by 44
Metadata
- Authors
- Zozoulenko, I., Singh, A., Singh, S. K., Gueskine, V., Crispin, X., & Berggren, M.
- Venue
- ACS Applied Polymer Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-12-11
- Volume
- 1
- Issue
- 1
- Pages
- 83-94
- ISSN
- 2637-6105 (ISSN-L)
- OpenAlex
- W2903669415
- Cited by
- 373
- References
- 31
- FWCI
- 13.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.