CoChat

Particle Size Effect on Platinum Dissolution: Considerations for Accelerated Stability Testing of Fuel Cell Catalysts

The DOI matches its Crossref record; 79 of the 79 references it cites were found in a registry or an index.

Abstract

Polymer electrolyte membrane fuel cells (PEMFCs) are highly attractive for use in electric vehicles. In PEMFCs, small particle sizes of the Pt catalyst are required to increase Pt utilization, which lower costs and also increase Pt dispersion, which itself minimizes O 2 mass transport losses. Reducing the particle size improves both the utilization and dispersion; however, stability of small particle sizes is an issue. Pt dissolution, as one of the major degradation mechanisms of PEMFC catalyst layers, is predicted to depend on the particle size. The particle size cannot be independently varied from loading in commercial Pt/C materials that have been used in numerous studies employing accelerated stability tests (ASTs). Therefore, in the study presented here, the Pt particle diameter was varied from 2 to 10 nm by depositing mass-selected nanoparticles on a flat glassy carbon substrate using magnetron sputtering. This allows exclusive control over particle density (interparticle distance) and particle size, which becomes difficult even with advanced synthetic techniques for applied Pt/C materials. Additionally, effects of the 3D porous support are eliminated. These model systems were subjected to an aggressive AST in order to cause significant Pt dissolution, which was monitored online using the scanning flow cell coupled to an inductively coupled plasma mass spectrometer. The results uncover a previously overlooked phenomenon: two competing trends in dissolution from (1) particle passivation caused by particle size-dependent shifts on oxophilicity and (2) electrochemically active surface area. Therefore, crucial impacts of the particle size on degradation may be overlooked in a variety of electrochemical studies, which compare catalytic materials. Finally, suggestions are given for improved ASTs for dissolution, which provide insights into the intrinsic stability of Pt nanoparticles toward dissolution.

Overview

Integrity signals

Registry

Crossref · 10.1021/acscatal.0c00779

Cites

79 of 79 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 79 references

Research works printed but not linked: 6

  1. Yang Y., 2015, PEM Fuel Cell System Manufacturing Cost Analysis for Automotive Applications
  2. 10.1021/acscatal.8b00694 · DOI · Paper page
  3. DOE, 2013, U.S. DRIVE Fuel Cell Tech Team Cell Component Accelerated Stress Test and Polarization Curve Protocols for PEM Fuel Cells
  4. DOE, 2010, USCAR Fuel Cell Tech Team Cell Component Accelerated Stress Test Protocols for PEM Fuel Cells
  5. DOE, 2007, DOE Cell Component Accelerated Stress Test Protocols for PEM Fuel Cells
  6. Myers D. J., 2010, 2010 Annual Progress Report-Polymer Electrolyte Fuel Cell Lifetime Limitations: The Role of Electrocatalysts Degradation

Cited by

Metadata

Authors
Sandbeck, D. J. S., Secher, N. M., Speck, F. D., Sørensen, J. E., Kibsgaard, J., Chorkendorff, I., & Cherevko, S.
Affiliations
  • Forschungszentrum Jülich (DE)
  • Technical University of Denmark (DK)
Corresponding author
  • Sandbeck, Daniel J. S.
  • Cherevko, Serhiy
Venue
ACS Catalysis
Published
2020-05-06
Volume
10
Issue
11
Pages
6281-6290
ISSN
2155-5435 (ISSN-L)
OpenAlex
W3021937722
Cited by
121
References
79
Citations by year
2026: 15 · 2025: 20 · 2024: 25 · 2023: 21 · 2022: 13 · 2021: 21 · 2020: 6
FWCI
5.23
Type
journal article
Language
en
Open access
closed
Locations
  • ACS Catalysis (publishedVersion)
  • Technical University of Denmark, DTU Orbit (Technical University of Denmark, DTU) (submittedVersion)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Materials Science › Materials Chemistry › Catalytic Processes in Materials Science
Keywords
platinum dissolution, platinum nanoparticles, particle size effects, proton exchange membrane fuel cells, accelerated stability testing, Pt/C catalyst, magnetron sputtering, oxophilicity, electrochemically active surface area, catalyst deactivation, platinum dispersion

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.