The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Phosphorus-Driven Electron Delocalization on Edge-Type FeN4 Active Sites for Oxygen Reduction in Acid Medium
Abstract
Precise tuning of the chemical environment of neighboring atomic FeN 4 sites is extremely important for optimizing Fe–N–C catalysts to produce the fast oxygen reduction reaction (ORR) kinetics both in acidic and alkaline media, but it is actually very challenging. Heteroatoms could affect the metal charge of the active center through long-range electron delocalization; however, there are a few studies on it. Herein, density functional theory (DFT) calculations demonstrate that the addition of long-range P into edge-type FeN 4 can drive the electron delocalization and decrease the band gap of the FeN 4 center, leading to a substantial decrease in the free energy barrier to direct four-electron ORR kinetics compared to P-free edge-type FeN 4, indicating superior intrinsic ORR activity. Experimentally, by incorporating P in edge-rich FeN 4 supported on N,P-doped carbon (Fe–N–C–P/N,P–C), the created Fe–N–C catalyst presents the greatly increased acidic ORR activity, with a half-wave potential ( E 1/2 ) of 0.80 V (vs a reversible hydrogen electrode), which approaches that of commercial Pt/C and also has a high half-wave potential of 0.87 V, beyond Pt/C for alkaline ORR. In addition, it shows higher proton exchange membrane fuel cell and Zn-air battery performances than the pristine Fe–C–N catalyst (Fe–N–C/N–C). This work will guide the rational design of highly active metal atomic scale catalysts with optimized chemical surroundings in terms of P incorporation as a chemically tunable method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High-Performance Electrocatalysts for Oxygen Reduction Derived from Polyaniline, Iron, and Cobalt
Wu, G., More, K. L., Johnston, C. M., & Zelenay, P. (2011) · Science · doi:10.1126/science.1200832 · Cited by 3,984
Xie, J., Zhang, H., Li, S., Wang, R., Sun, X., Zhou, M., Zhou, J., Lou, X. W. (., & Xie, Y. (2013) · Advanced Materials · doi:10.1002/adma.201302685 · Cited by 3,079
Fei, H., Dong, J., Feng, Y., Allen, C. S., Wan, C., Volosskiy, B., Li, M., Zhao, Z., Wang, Y., Sun, H., et al. (2018) · Nature Catalysis · doi:10.1038/s41929-017-0008-y · Cited by 1,973
Highly Durable and Active PtFe Nanocatalyst for Electrochemical Oxygen Reduction Reaction
Chung, D. Y., Jun, S. W., Yoon, G., Kwon, S. G., Shin, D. Y., Seo, P., Yoo, J. M., Shin, H., Chung, Y.-H., Kim, H., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b09653 · Cited by 677
Cited by
Understanding the structure-performance relationship of active sites at atomic scale
Li, R., & Wang, D. (2022) · Nano Research · doi:10.1007/s12274-022-4371-x · Cited by 537
Review of Carbon Support Coordination Environments for Single Metal Atom Electrocatalysts (SACS)
Song, W., Xiao, C., Ding, J., Huang, Z., Yang, X., Zhang, T., Mitlin, D., & Hu, W. (2024) · Advanced Materials · doi:10.1002/adma.202301477 · Cited by 373
Metadata
- Authors
- Yin, H., Yuan, P., Lu, B.-A., Xia, H., Guo, K., Yang, G., Qu, G., Xue, D., Hu, Y., Cheng, J., Mu, S., & Zhang, J.-N.
- Venue
- ACS Catalysis
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-10-05
- Volume
- 11
- Issue
- 20
- Pages
- 12754-12762
- ISSN
- 2155-5435 (ISSN-L)
- OpenAlex
- W3204762437
- Cited by
- 173
- References
- 4
- FWCI
- 5.86
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.