The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Ag Alloyed Pd Single-Atom Catalysts for Efficient Selective Hydrogenation of Acetylene to Ethylene in Excess Ethylene
Abstract
Semihydrogenation of acetylene in an ethylene-rich stream is an industrially important process. Conventional supported monometallic Pd catalysts offer high acetylene conversion, but they suffer from very low selectivity to ethylene due to overhydrogenation and the formation of carbonaceous deposits. Herein, a series of Ag alloyed Pd single-atom catalysts, possessing only ppm levels of Pd, supported on silica gel were prepared by a simple incipient wetness coimpregnation method and applied to the selective hydrogenation of acetylene in an ethylene-rich stream under conditions close to the front-end employed by industry. High acetylene conversion and simultaneous selectivity to ethylene was attained over a wide temperature window, surpassing an analogous Au alloyed Pd single-atom system we previously reported. Restructuring of AgPd nanoparticles and electron transfer from Ag to Pd were evidenced by in situ FTIR and in situ XPS as a function of increasing reduction temperature. Microcalorimetry and XANES measurements support both geometric and electronic synergetic effects between the alloyed Pd and Ag. Kinetic studies provide valuable insight into the nature of the active sites within these AgPd/SiO 2 catalysts, and hence, they provide evidence for the key factors underpinning the excellent performance of these bimetallic catalysts toward the selective hydrogenation of acetylene under ethylene-rich conditions while minimizing precious metal usage.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Slanac, D. A., Hardin, W. G., Johnston, K. P., & Stevenson, K. J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja303580b · Cited by 295
Cited by
Tuning selectivity of electrochemical reactions by atomically dispersed platinum catalyst
Choi, C. H., Kim, M., Kwon, H. C., Cho, S. J., Yun, S., Kim, H.-T., Mayrhofer, K. J. J., Kim, H., & Choi, M. (2016) · Nature Communications · doi:10.1038/ncomms10922 · Cited by 849
Facet engineering accelerates spillover hydrogenation on highly diluted metal nanocatalysts
Jiang, L., Liu, K., Hung, S.-F., Zhou, L., Qin, R., Zhang, Q., Liu, P., Gu, L., Chen, H. M., Fu, G., et al. (2020) · Nature Nanotechnology · doi:10.1038/s41565-020-0746-x · Cited by 380
Pan, Y., Zhang, C., Liu, Z., Chen, C., & Li, Y. (2020) · Matter · doi:10.1016/j.matt.2019.11.014 · Cited by 341
Riley, C., Zhou, S., Kunwar, D., De La Riva, A., Peterson, E., Payne, R., Gao, L., Lin, S., Guo, H., & Datye, A. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b07789 · Cited by 298
Single‐Atom Catalysts of Precious Metals for Electrochemical Reactions
Kim, J., Kim, H., & Lee, H. (2018) · ChemSusChem · doi:10.1002/cssc.201701306 · Cited by 282
Metadata
- Authors
- Pei, G. X., Liu, X. Y., Wang, A., Lee, A. F., Isaacs, M. A., Li, L., Pan, X., Yang, X., Wang, X., Tai, Z., Wilson, K., & Zhang, T.
- Venue
- ACS Catalysis
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-05-20
- Volume
- 5
- Issue
- 6
- Pages
- 3717-3725
- ISSN
- 2155-5435 (ISSN-L)
- OpenAlex
- W2197652168
- Cited by
- 686
- References
- 1
- FWCI
- 21.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.