The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
IrO2-TiO2: A High-Surface-Area, Active, and Stable Electrocatalyst for the Oxygen Evolution Reaction
Abstract
The utilization and development of efficient water electrolyzers for hydrogen production is currently limited due to the sluggish kinetics of the anodic process—the oxygen evolution reaction (OER). Moreover, state of the art OER catalysts contain high amounts of expensive and low-abundance noble metals such as Ru and Ir, limiting their large-scale industrial utilization. Therefore, the development of low-cost, highly active, and stable OER catalysts is a key requirement toward the implementation of a hydrogen-based economy. We have developed a synthetic approach to high-surface-area chlorine-free iridium oxide nanoparticles dispersed in titania (IrO 2 -TiO 2 ), which is a highly active and stable OER catalyst in acidic media. IrO 2 -TiO 2 was prepared in one step in molten NaNO 3 (Adams fusion method) and consists of ca. 1–2 nm IrO 2 particles distributed in a matrix of titania nanoparticles with an overall surface area of 245 m 2 g –1 . This material contains 40 mol M % of iridium and demonstrates improved OER activity and stability in comparison to the commercial benchmark catalyst and state of the art high-surface-area IrO 2 . Ex situ characterization of the catalyst indicates the presence of iridium hydroxo surface species, which were previously associated with the high OER activity. Operando X-ray absorption studies demonstrate the evolution of the surface species as a function of the applied potential, suggesting the conversion of the initial hydroxo surface layer to the oxo-terminated surface via anodic oxidation (OER regime).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
High-Resolution X-Ray Photoemission Spectrum of the Valence Bands of Gold
Shirley, D. A. (1972) · Physical Review B · doi:10.1103/physrevb.5.4709 · Cited by 6,231
Hartree-Slater subshell photoionization cross-sections at 1254 and 1487 eV
Scofield, J. H. (1976) · Journal of Electron Spectroscopy and Related Phenomena · doi:10.1016/0368-2048(76)80015-1 · Cited by 5,981
A comprehensive review on PEM water electrolysis
Carmo, M., Fritz, D. L., Mergel, J., & Stolten, D. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.01.151 · Cited by 5,492
IFEFFIT : interactive XAFS analysis and FEFF fitting
Newville, M. (2001) · Journal of Synchrotron Radiation · doi:10.1107/s0909049500016964 · Cited by 3,046
A highly active and stable IrO x /SrIrO 3 catalyst for the oxygen evolution reaction
Seitz, L. C., Dickens, C. F., Nishio, K., Hikita, Y., Montoya, J., Doyle, A., Kirk, C., Vojvodic, A., Hwang, H. Y., Norskov, J. K., et al. (2016) · Science · doi:10.1126/science.aaf5050 · Cited by 2,196
Developments and perspectives of oxide-based catalysts for the oxygen evolution reaction
Fabbri, E., Habereder, A., Waltar, K., Kötz, R., & Schmidt, T. J. (2014) · Catal. Sci. Technol. · doi:10.1039/c4cy00669k · Cited by 1,303
Self-citationReier, T., Nong, H. N., Teschner, D., Schlögl, R., & Strasser, P. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601275 · Cited by 1,253
Characterization of High‐Surface‐Area Electrocatalysts Using a Rotating Disk Electrode Configuration
Schmidt, T. J., Gasteiger, H. A., Stäb, G. D., Urban, P. M., Kolb, D. M., & Behm, R. J. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838642 · Cited by 1,131
Self-citationSpöri, C., Kwan, J. T. H., Bonakdarpour, A., Wilkinson, D. P., & Strasser, P. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201608601 · Cited by 924
Cited by
In Situ/Operando Electrocatalyst Characterization by X-ray Absorption Spectroscopy
Timoshenko, J., & Roldan Cuenya, B. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00396 · Cited by 931
Shi, Z., Wang, Y., Li, J., Wang, X., Wang, Y., Li, Y., Xu, W., Jiang, Z., Liu, C., Xing, W., et al. (2021) · Joule · doi:10.1016/j.joule.2021.05.018 · Cited by 554
Status and perspectives of key materials for PEM electrolyzer
Zhang, K., Liang, X., Wang, L., Sun, K., Wang, Y., Xie, Z., Wu, Q., Bai, X., Hamdy, M. S., Chen, H., et al. (2022) · Nano Research Energy · doi:10.26599/nre.2022.9120032 · Cited by 497
Perspectives on Low-Temperature Electrolysis and Potential for Renewable Hydrogen at Scale
Ayers, K., Danilovic, N., Ouimet, R., Carmo, M., Pivovar, B., & Bornstein, M. (2019) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-060718-030241 · Cited by 406
Designing High‐Valence Metal Sites for Electrochemical Water Splitting
Sun, H., Xu, X., Song, Y., Zhou, W., & Shao, Z. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009779 · Cited by 403
Metadata
- Authors
- Oakton, E., Lebedev, D., Povia, M., Abbott, D. F., Fabbri, E., Fedorov, A., Nachtegaal, M., Copéret, C., & Schmidt, T. J.
- Venue
- ACS Catalysis
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-02-27
- Volume
- 7
- Issue
- 4
- Pages
- 2346-2352
- ISSN
- 2155-5435 (ISSN-L)
- OpenAlex
- W2588303101
- Cited by
- 379
- References
- 41
- FWCI
- 8.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: IrO2-TiO2: A High-Surface-Area, Active, and Stable Electrocatalyst for the Oxygen Evolution Reaction. https://app.cochat.ai/papers/10.1021/acscatal.6b03246
- The paper
- Oakton, E., Lebedev, D., Povia, M., Abbott, D. F., Fabbri, E., Fedorov, A., Nachtegaal, M., Copéret, C., & Schmidt, T. J. (2017). IrO2-TiO2: A High-Surface-Area, Active, and Stable Electrocatalyst for the Oxygen Evolution Reaction. ACS Catalysis. https://doi.org/10.1021/acscatal.6b03246
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.