The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
IrO2-TiO2: A High-Surface-Area, Active, and Stable Electrocatalyst for the Oxygen Evolution Reaction
Abstract
The utilization and development of efficient water electrolyzers for hydrogen production is currently limited due to the sluggish kinetics of the anodic process—the oxygen evolution reaction (OER). Moreover, state of the art OER catalysts contain high amounts of expensive and low-abundance noble metals such as Ru and Ir, limiting their large-scale industrial utilization. Therefore, the development of low-cost, highly active, and stable OER catalysts is a key requirement toward the implementation of a hydrogen-based economy. We have developed a synthetic approach to high-surface-area chlorine-free iridium oxide nanoparticles dispersed in titania (IrO 2 -TiO 2 ), which is a highly active and stable OER catalyst in acidic media. IrO 2 -TiO 2 was prepared in one step in molten NaNO 3 (Adams fusion method) and consists of ca. 1–2 nm IrO 2 particles distributed in a matrix of titania nanoparticles with an overall surface area of 245 m 2 g –1 . This material contains 40 mol M % of iridium and demonstrates improved OER activity and stability in comparison to the commercial benchmark catalyst and state of the art high-surface-area IrO 2 . Ex situ characterization of the catalyst indicates the presence of iridium hydroxo surface species, which were previously associated with the high OER activity. Operando X-ray absorption studies demonstrate the evolution of the surface species as a function of the applied potential, suggesting the conversion of the initial hydroxo surface layer to the oxo-terminated surface via anodic oxidation (OER regime).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
High-Resolution X-Ray Photoemission Spectrum of the Valence Bands of Gold
Shirley, D. A. (1972) · Physical Review B · doi:10.1103/physrevb.5.4709 · Cited by 6,231
Hartree-Slater subshell photoionization cross-sections at 1254 and 1487 eV
Scofield, J. H. (1976) · Journal of Electron Spectroscopy and Related Phenomena · doi:10.1016/0368-2048(76)80015-1 · Cited by 5,981
A comprehensive review on PEM water electrolysis
Carmo, M., Fritz, D. L., Mergel, J., & Stolten, D. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.01.151 · Cited by 5,492
IFEFFIT : interactive XAFS analysis and FEFF fitting
Newville, M. (2001) · Journal of Synchrotron Radiation · doi:10.1107/s0909049500016964 · Cited by 3,046
A highly active and stable IrO x /SrIrO 3 catalyst for the oxygen evolution reaction
Seitz, L. C., Dickens, C. F., Nishio, K., Hikita, Y., Montoya, J., Doyle, A., Kirk, C., Vojvodic, A., Hwang, H. Y., Norskov, J. K., et al. (2016) · Science · doi:10.1126/science.aaf5050 · Cited by 2,196
Developments and perspectives of oxide-based catalysts for the oxygen evolution reaction
Fabbri, E., Habereder, A., Waltar, K., Kötz, R., & Schmidt, T. J. (2014) · Catal. Sci. Technol. · doi:10.1039/c4cy00669k · Cited by 1,303
Self-citationReier, T., Nong, H. N., Teschner, D., Schlögl, R., & Strasser, P. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601275 · Cited by 1,253
Characterization of High‐Surface‐Area Electrocatalysts Using a Rotating Disk Electrode Configuration
Schmidt, T. J., Gasteiger, H. A., Stäb, G. D., Urban, P. M., Kolb, D. M., & Behm, R. J. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838642 · Cited by 1,131
Self-citationSpöri, C., Kwan, J. T. H., Bonakdarpour, A., Wilkinson, D. P., & Strasser, P. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201608601 · Cited by 924
Electrocatalytic properties of transition metal oxides for oxygen evolution reaction
Matsumoto, Y., & Sato, E. (1986) · Materials Chemistry and Physics · doi:10.1016/0254-0584(86)90045-3 · Cited by 717
Reier, T., Pawolek, Z., Cherevko, S., Bruns, M., Jones, T., Teschner, D., Selve, S., Bergmann, A., Nong, H. N., Schlögl, R., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b07788 · Cited by 713
Oh, H.-S., Nong, H. N., Reier, T., Bergmann, A., Gliech, M., Ferreira de Araújo, J., Willinger, E., Schlögl, R., Teschner, D., & Strasser, P. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b07199 · Cited by 641
Electrocatalysis by oxides — Attempt at a unifying approach
Trasatti, S. (1980) · Journal of Electroanalytical Chemistry and Interfacial Electrochemistry · doi:10.1016/s0022-0728(80)80084-2 · Cited by 545
Abbott, D. F., Lebedev, D., Waltar, K., Povia, M., Nachtegaal, M., Fabbri, E., Copéret, C., & Schmidt, T. J. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02625 · Cited by 492
Self-citationThe electronic structure of iridium and its oxides
Pfeifer, V., Jones, T. E., Velasco Vélez, J. J., Massué, C., Arrigo, R., Teschner, D., Girgsdies, F., Scherzer, M., Greiner, M. T., Allan, J., et al. (2016) · Surface and Interface Analysis · doi:10.1002/sia.5895 · Cited by 456
Nong, H. N., Oh, H., Reier, T., Willinger, E., Willinger, M., Petkov, V., Teschner, D., & Strasser, P. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411072 · Cited by 453
Electrochemical chlorine evolution at rutile oxide (110) surfaces
Hansen, H. A., Man, I. C., Studt, F., Abild-Pedersen, F., Bligaard, T., & Rossmeisl, J. (2010) · Phys. Chem. Chem. Phys. · doi:10.1039/b917459a · Cited by 426
Influence of Ionomer Content in IrO2/TiO2Electrodes on PEM Water Electrolyzer Performance
Bernt, M., & Gasteiger, H. A. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0231611jes · Cited by 416
Cherevko, S., Geiger, S., Kasian, O., Mingers, A., & Mayrhofer, K. J. J. (2016) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2016.05.015 · Cited by 332
Fierro, S., Nagel, T., Baltruschat, H., & Comninellis, C. (2007) · Electrochemistry Communications · doi:10.1016/j.elecom.2007.05.008 · Cited by 263
Adams, R., & Shriner, R. L. (1923) · Journal of the American Chemical Society · doi:10.1021/ja01662a022 · Cited by 256
Electrochemical surface characterization of IrO2 + SnO2 mixed oxide electrocatalysts
De Pauli, C. P., & Trasatti, S. (1995) · Journal of Electroanalytical Chemistry · doi:10.1016/0022-0728(95)03950-l · Cited by 237
Impact of film drying procedures on RDE characterization of Pt/VC electrocatalysts
Garsany, Y., Singer, I. L., & Swider-Lyons, K. E. (2011) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2011.09.016 · Cited by 224
Investigations on high performance proton exchange membrane water electrolyzer
MA, L., SUI, S., & ZHAI, Y. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2008.11.022 · Cited by 217
Müller, O., Nachtegaal, M., Just, J., Lützenkirchen-Hecht, D., & Frahm, R. (2016) · Journal of Synchrotron Radiation · doi:10.1107/s1600577515018007 · Cited by 210
Self-citationXu, J., Liu, G., Li, J., & Wang, X. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2011.10.044 · Cited by 192
Electrochemical characterisation of IrxSn1−xO2 powders as oxygen evolution electrocatalysts
Marshall, A., Børresen, B., Hagen, G., Tsypkin, M., & Tunold, R. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2005.09.004 · Cited by 191
Ouattara, L., Fierro, S., Frey, O., Koudelka, M., & Comninellis, C. (2009) · Journal of Applied Electrochemistry · doi:10.1007/s10800-009-9809-2 · Cited by 164
Siracusano, S., Baglio, V., D’Urso, C., Antonucci, V., & Aricò, A. S. (2009) · Electrochimica Acta · doi:10.1016/j.electacta.2009.05.094 · Cited by 149
Non-conductive TiO2 as the anode catalyst support for PEM water electrolysis
Mazúr, P., Polonský, J., Paidar, M., & Bouzek, K. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.05.129 · Cited by 145
Minguzzi, A., Locatelli, C., Lugaresi, O., Achilli, E., Cappelletti, G., Scavini, M., Coduri, M., Masala, P., Sacchi, B., Vertova, A., et al. (2015) · ACS Catalysis · doi:10.1021/acscatal.5b01281 · Cited by 135
Binninger, T., Fabbri, E., Pătru, A., Garganourakis, M., Han, J., Abbott, D. F., Sereda, O., Kötz, R., Menzel, A., Nachtegaal, M., et al. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0201610jes · Cited by 127
Self-citationBlasi, A. D., D’Urso, C., Baglio, V., Antonucci, V., Aricò, A. S., Ornelas, R., Matteucci, F., Orozco, G., Beltrán, D. E., Meas, Y., et al. (2008) · Journal of Applied Electrochemistry · doi:10.1007/s10800-008-9651-y · Cited by 125
The Role of TiO 2 Doping on RuO 2 -Coated Electrodes for the Water Oxidation Reaction
Näslund, L., Sánchez‐Sánchez, C. M., Ingason, A. S., Bäckström, J., Herrero, E., Rosén, J., & Holmin, S. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp308941g · Cited by 118
Liu, G., Xu, J., Wang, Y., & Wang, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02942b · Cited by 108
Chandra, D., Takama, D., Masaki, T., Sato, T., Abe, N., Togashi, T., Kurihara, M., Saito, K., Yui, T., & Yagi, M. (2016) · ACS Catalysis · doi:10.1021/acscatal.6b00621 · Cited by 107
Polonský, J., Petrushina, I. M., Christensen, E., Bouzek, K., Prag, C. B., Andersen, J., & Bjerrum, N. J. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.11.035 · Cited by 104
Cruz, A. M., Abad, L., Carretero, N. M., Moral‐Vico, J., Fraxedas, J., Lozano, P., Subías, G., Padial, V., Carballo, M., Collazos-Castro, J. E., et al. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp212275q · Cited by 85
X-ray absorption in relation to valency of iridium in sputtered iridium oxide films
Pauporté, T., Aberdam, D., Hazemann, J., Faure, R., & Durand, R. (1999) · Journal of Electroanalytical Chemistry · doi:10.1016/s0022-0728(99)00058-3 · Cited by 68
A simple one-pot Adams method route to conductive high surface area IrO 2 –TiO 2 materials
Oakton, E., Lebedev, D., Fedorov, A., Krumeich, F., Tillier, J., Sereda, O., Schmidt, T. J., & Copéret, C. (2015) · New Journal of Chemistry · doi:10.1039/c5nj02400e · Cited by 61
Self-citation
Cited by
In Situ/Operando Electrocatalyst Characterization by X-ray Absorption Spectroscopy
Timoshenko, J., & Roldan Cuenya, B. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00396 · Cited by 931
Shi, Z., Wang, Y., Li, J., Wang, X., Wang, Y., Li, Y., Xu, W., Jiang, Z., Liu, C., Xing, W., et al. (2021) · Joule · doi:10.1016/j.joule.2021.05.018 · Cited by 554
Status and perspectives of key materials for PEM electrolyzer
Zhang, K., Liang, X., Wang, L., Sun, K., Wang, Y., Xie, Z., Wu, Q., Bai, X., Hamdy, M. S., Chen, H., et al. (2022) · Nano Research Energy · doi:10.26599/nre.2022.9120032 · Cited by 497
Perspectives on Low-Temperature Electrolysis and Potential for Renewable Hydrogen at Scale
Ayers, K., Danilovic, N., Ouimet, R., Carmo, M., Pivovar, B., & Bornstein, M. (2019) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-060718-030241 · Cited by 406
Designing High‐Valence Metal Sites for Electrochemical Water Splitting
Sun, H., Xu, X., Song, Y., Zhou, W., & Shao, Z. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009779 · Cited by 403
Metadata
- Authors
- Oakton, E., Lebedev, D., Povia, M., Abbott, D. F., Fabbri, E., Fedorov, A., Nachtegaal, M., Copéret, C., & Schmidt, T. J.
- Venue
- ACS Catalysis
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-02-27
- Volume
- 7
- Issue
- 4
- Pages
- 2346-2352
- ISSN
- 2155-5435 (ISSN-L)
- OpenAlex
- W2588303101
- Cited by
- 379
- References
- 41
- FWCI
- 8.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.