The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Support Induced Control of Surface Composition in Cu–Ni/TiO2 Catalysts Enables High Yield Co-Conversion of HMF and Furfural to Methylated Furans
Abstract
5-(Hydroxymethyl)furfural (HMF) and furfural (FF) have been identified as valuable biomass-derived fuel precursors suitable for catalytic hydrodeoxygenation (HDO) to produce high octane fuel additives such dimethyl furan (DMF) and methyl furan (MF), respectively. In order to realize economically viable production of DMF and MF from biomass, catalytic processes with high yields, low catalyst costs, and process simplicity are needed. Here, we demonstrate simultaneous coprocessing of HMF and FF over Cu–Ni/TiO 2 catalysts, achieving 87.5% yield of DMF from HMF and 88.5% yield of MF from FF in a one pot reaction. The Cu–Ni/TiO 2 catalyst exhibited improved stability and regeneration compared to Cu/TiO 2 and Cu/Al 2 O 3 catalysts for FF HDO, with a ∼7% loss in FF conversion over four sequential recycles, compared to a ∼50% loss in FF conversion for Cu/Al 2 O 3 and a ∼30% loss in conversion for Cu/TiO 2 . Characterization of the Cu–Ni/TiO 2 catalyst by X-ray photoelectron spectroscopy, scanning transmission electron microscopy, and H 2 –temperature-programmed reduction and comparison to monometallic Cu and Ni on Al 2 O 3 and TiO 2 and bimetallic Cu–Ni/Al 2 O 3 catalysts suggest that the unique reactivity and stability of Cu–Ni/TiO 2 derives from support-induced metal segregation in which Cu is selectively enriched at the catalyst surface, while Ni is enriched at the TiO 2 interface. These results demonstrate that Cu–Ni/TiO 2 catalysts promise to be a system capable of integrating directly with a combined HMF and FF product stream from biomass processing to realize lower cost production of liquid fuels from biomass.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanoalloys: From Theory to Applications of Alloy Clusters and Nanoparticles
Ferrando, R., Jellinek, J., & Johnston, R. L. (2008) · Chemical Reviews · doi:10.1021/cr040090g · Cited by 3,690
Strong metal-support interactions. Group 8 noble metals supported on titanium dioxide
Tauster, S. J., Fung, S. C., & Garten, R. L. (1978) · Journal of the American Chemical Society · doi:10.1021/ja00469a029 · Cited by 3,188
Furfural—A Promising Platform for Lignocellulosic Biofuels
Lange, J., van der Heide, E., van Buijtenen, J., & Price, R. (2012) · ChemSusChem · doi:10.1002/cssc.201100648 · Cited by 1,323
How biotech can transform biofuels
Lynd, L. R., Laser, M. S., Bransby, D., Dale, B. E., Davison, B., Hamilton, R., Himmel, M., Keller, M., McMillan, J. D., Sheehan, J., et al. (2008) · Nature Biotechnology · doi:10.1038/nbt0208-169 · Cited by 1,121
Self-citationCatalytic conversion of biomass to monofunctional hydrocarbons and targeted liquid-fuel classes
Kunkes, E. L., Simonetti, D. A., West, R. M., Serrano-Ruiz, J. C., Gärtner, C. A., & Dumesic, J. A. (2008) · Science · doi:10.1126/science.1159210 · Cited by 895
Cited by
Control of metal-support interactions in heterogeneous catalysts to enhance activity and selectivity
van Deelen, T. W., Hernández Mejía, C., & de Jong, K. P. (2019) · Nature Catalysis · doi:10.1038/s41929-019-0364-x · Cited by 2,349
Hannagan, R. T., Giannakakis, G., Flytzani-Stephanopoulos, M., & Sykes, E. C. H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00078 · Cited by 1,017
Chen, S., Wojcieszak, R., Dumeignil, F., Marceau, E., & Royer, S. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00134 · Cited by 979
Electronic Metal–Support Interaction of Single‐Atom Catalysts and Applications in Electrocatalysis
Yang, J., Li, W., Wang, D., & Li, Y. (2020) · Advanced Materials · doi:10.1002/adma.202003300 · Cited by 824
Advances in porous and nanoscale catalysts for viable biomass conversion
Sudarsanam, P., Peeters, E., Makshina, E. V., Parvulescu, V. I., & Sels, B. F. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00452h · Cited by 643
Approaches for Understanding and Controlling Interfacial Effects in Oxide-Supported Metal Catalysts
Ro, I., Resasco, J., & Christopher, P. (2018) · ACS Catalysis · doi:10.1021/acscatal.8b02071 · Cited by 316
Self-citationCatalytic conversion of 5-hydroxymethylfurfural to some value-added derivatives
Kong, X., Zhu, Y., Fang, Z., Kozinski, J. A., Butler, I. S., Xu, L., Song, H., & Wei, X. (2018) · Green Chemistry · doi:10.1039/c8gc00234g · Cited by 306
A Control over Hydrogenation Selectivity of Furfural via Tuning Exposed Facet of Ni Catalysts
Meng, X., Yang, Y., Chen, L., Xu, M., Zhang, X., & Wei, M. (2019) · ACS Catalysis · doi:10.1021/acscatal.9b00238 · Cited by 259
Metadata
- Authors
- Seemala, B., Cai, C. M., Wyman, C. E., & Christopher, P.
- Venue
- ACS Catalysis
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-05-16
- Volume
- 7
- Issue
- 6
- Pages
- 4070-4082
- ISSN
- 2155-5435 (ISSN-L)
- OpenAlex
- W2614007466
- Cited by
- 204
- References
- 5
- FWCI
- 9.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.