Determination of Electroactive Surface Area of Ni-, Co-, Fe-, and Ir-Based Oxide Electrocatalysts
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Metal oxides are important functional materials with a wide range of applications, especially in the field of electrocatalysis. However, quick and accurate assessment of their real electroactive surface area (ECSA), which is of paramount importance for the evaluation of their performance, remains a challenging task. Herein, we present a relatively simple strategy for an accurate in situ determination of the ECSA of commonly used metal oxide catalysts, namely Ni-, Co-, Fe-, Pt-, and Ir-based oxides. Similar to the well-established practice in electrocatalysis, the method is based on the phenomenon of specific adsorption. It uses the fact that at electrode potentials close to the onset of the oxygen evolution reaction, specifically adsorbed reaction intermediates manifest themselves through so called adsorption capacitance, which is unambiguously detectable using electrochemical impedance spectroscopy. We determined and calibrated these capacitances for common catalyst metal oxides using model thin films. Therefore, with simple impedance measurements, experimentalists can acquire the adsorption capacitance values and accurately estimate the real electroactive surface area of the above-mentioned oxide materials, including nanostructured electrocatalysts. Additionally, as illustrative examples, we demonstrate the application of the method for the determination of the ECSA of oxide catalyst nanoparticles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Benchmarking Heterogeneous Electrocatalysts for the Oxygen Evolution Reaction
McCrory, C. C. L., Jung, S., Peters, J. C., & Jaramillo, T. F. (2013) · Journal of the American Chemical Society · doi:10.1021/ja407115p · Cited by 7,026
Cited by
Chatenet, M., Pollet, B. G., Dekel, D. R., Dionigi, F., Deseure, J., Millet, P., Braatz, R. D., Bazant, M. Z., Eikerling, M., Staffell, I., et al. (2022) · Chemical Society Reviews · doi:10.1039/d0cs01079k · Cited by 2,025
Shih, A. J., Monteiro, M. C. O., Dattila, F., Pavesi, D., Philips, M., da Silva, A. H. M., Vos, R. E., Ojha, K., Park, S., van der Heijden, O., et al. (2022) · Nature Reviews Methods Primers · doi:10.1038/s43586-022-00164-0 · Cited by 521
Pt/Fe2O3 with Pt–Fe pair sites as a catalyst for oxygen reduction with ultralow Pt loading
Gao, R., Wang, J., Huang, Z.-F., Zhang, R., Wang, W., Pan, L., Zhang, J., Zhu, W., Zhang, X., Shi, C., et al. (2021) · Nature Energy · doi:10.1038/s41560-021-00826-5 · Cited by 507
Jeon, S. S., Kang, P. W., Klingenhof, M., Lee, H., Dionigi, F., & Strasser, P. (2023) · ACS Catalysis · doi:10.1021/acscatal.2c04452 · Cited by 316
Pham, C. V., Escalera‐López, D., Mayrhofer, K., Cherevko, S., & Thiele, S. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101998 · Cited by 301
Metadata
- Authors
- Watzele, S., Hauenstein, P., Liang, Y., Xue, S., Fichtner, J., Garlyyev, B., Scieszka, D., Claudel, F., Maillard, F., & Bandarenka, A. S.
- Venue
- ACS Catalysis
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-08-30
- Volume
- 9
- Issue
- 10
- Pages
- 9222-9230
- ISSN
- 2155-5435 (ISSN-L)
- OpenAlex
- W2970603661
- Cited by
- 149
- References
- 1
- FWCI
- 2.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Determination of Electroactive Surface Area of Ni-, Co-, Fe-, and Ir-Based Oxide Electrocatalysts. https://app.cochat.ai/papers/10.1021/acscatal.9b02006
- The paper
- Watzele, S., Hauenstein, P., Liang, Y., Xue, S., Fichtner, J., Garlyyev, B., Scieszka, D., Claudel, F., Maillard, F., & Bandarenka, A. S. (2019). Determination of Electroactive Surface Area of Ni-, Co-, Fe-, and Ir-Based Oxide Electrocatalysts. ACS Catalysis. https://doi.org/10.1021/acscatal.9b02006
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.