Highly Dispersed Ruthenium-Based Multifunctional Electrocatalyst
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
A high-efficiency trifunctional electrocatalyst is required for practical applications of regenerative fuel cells, because the hydrogen evolution reaction (HER), oxygen reduction reaction (ORR), and oxygen evolution reaction (OER) are their core electrode reactions. However, implementation of both hydrogen and oxygen electrodes is hindered by low activity and poor stability of electrocatalysts for both water splitting and oxygen reduction. Herein, we report a high-temperature annealing strategy to fabricate a highly dispersed ruthenium-based catalyst embedded onto nitrogen-doped graphene (0.4-Ru@NG-750). The 0.4-Ru@NG-750 catalyst exhibits high trifunctional electrocatalytic activity and good stability in HER, ORR, and OER. The 0.4-Ru@NG-750 electrocatalyst exhibits a low overpotential of only 0.04 and 0.09 V at the current density of 10 mA·cm –2 for HER in 1.0 M KOH and 0.5 M H 2 SO 4, respectively, and 0.372 V for OER in 1.0 M KOH. Moreover, it shows a high half-wave potential of 0.826 and 0.723 V for ORR in 0.1 M KOH and 0.1 M HClO 4, respectively. Structural characterizations show that RuN 4 C x is one of the main structures in 0.4-Ru@NG-750. Density functional theory calculations indicate that the surface states of RuN 4 C x sites evolve in different reaction conditions. In HER, ORR, and OER, the most stable states should be RuN 4 C x, RuN 4 (OH)C x, and RuN 4 (O)C x, respectively, on which the theoretical overpotential is the lowest.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lu, B., Guo, L., Wu, F., Peng, Y., Lu, J. E., Smart, T. J., Wang, N., Finfrock, Y. Z., Morris, D., Zhang, P., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08419-3 · Cited by 629
Zhang, C., Sha, J., Fei, H., Liu, M., Yazdi, S., Zhang, J., Zhong, Q., Zou, X., Zhao, N., Yu, H., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b02148 · Cited by 545
Lu, J., Zhou, W., Wang, L., Jia, J., Ke, Y., Yang, L., Zhou, K., Liu, X., Tang, Z., Li, L., et al. (2016) · ACS Catalysis · doi:10.1021/acscatal.5b02302 · Cited by 159
Cited by
Single‐Atom Catalysts for Electrocatalytic Applications
Zhang, Q., & Guan, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000768 · Cited by 741
Self-citationRong, C., Shen, X., Wang, Y., Thomsen, L., Zhao, T., Li, Y., Lu, X., Amal, R., & Zhao, C. (2022) · Advanced Materials · doi:10.1002/adma.202110103 · Cited by 503
Noble-metal single-atoms in thermocatalysis, electrocatalysis, and photocatalysis
Zhang, F., Zhu, Y., Lin, Q., Zhang, L., Zhang, X., & Wang, H. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00247c · Cited by 388
Wang, C., Zhai, P., Xia, M., Liu, W., Gao, J., Sun, L., & Hou, J. (2023) · Advanced Materials · doi:10.1002/adma.202209307 · Cited by 307
Xie, Q., Wang, Z., Lin, L., Shu, Y., Zhang, J., Li, C., Shen, Y., & Uyama, H. (2021) · Small · doi:10.1002/smll.202102160 · Cited by 42
Metadata
- Authors
- Bai, L., Duan, Z., Wen, X., Si, R., Zhang, Q., & Guan, J.
- Venue
- ACS Catalysis
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-09-23
- Volume
- 9
- Issue
- 11
- Pages
- 9897-9904
- ISSN
- 2155-5435 (ISSN-L)
- OpenAlex
- W2976241241
- Cited by
- 132
- References
- 3
- FWCI
- 4.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.