The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Electrolyte Engineering Enables High Stability and Capacity Alloying Anodes for Sodium and Potassium Ion Batteries
Abstract
Development of sodium and potassium ion batteries with greater energy density is gaining great attention. Although recently proposed alloying anodes (e.g., Sn and Bi) demonstrate much higher capacity than classic carbon anodes, their severe capacity fading hinders their practical applications. The failure mechanism has traditionally been attributed to the large volumetric change and/or their fragile solid electrolyte interphase (SEI). However, herein we present a completely new concept and approach based on electrolyte engineering to stabilize alloying anodes. This approach results in unprecedented high capacity (>650 mAh g –1 ) and stability (>500 cycles) of alloying anodes by simply tuning the electrolyte compositions, without the need for nanostructural control and/or carbon modification. We confirm that the cation solvation structure, particularly the type and location of the anions in the electrolyte, plays a critical role in alloying anode stabilization. We further present a new anionic and alloying anode reaction model showing that the root cause of the capacity fading in these alloys is dictated by the properties of the anions and not only the volume change or fragile SEI effect. Our model elucidates the failure mechanism in alloying anodes and provides a new guideline for electrolyte design that stabilizes alloying anodes in emerging mobile ion batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
“Water-in-salt” electrolyte enables high-voltage aqueous lithium-ion chemistries
Suo, L., Borodin, O., Gao, T., Olguin, M., Ho, J., Fan, X., Luo, C., Wang, C., & Xu, K. (2015) · Science · doi:10.1126/science.aab1595 · Cited by 3,821
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Self-citationIdentifying the components of the solid–electrolyte interphase in Li-ion batteries
Wang, L., Menakath, A., Han, F., Wang, Y., Zavalij, P. Y., Gaskell, K. J., Borodin, O., Iuga, D., Brown, S. P., Wang, C., et al. (2019) · Nature Chemistry · doi:10.1038/s41557-019-0304-z · Cited by 514
Self-citationPerspective—Fluorinating Interphases
Wang, C., Meng, Y. S., & Xu, K. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0281903jes · Cited by 173
Lee, H., Lim, H.-S., Ren, X., Yu, L., Engelhard, M. H., Han, K. S., Lee, J., Kim, H.-T., Xiao, J., Liu, J., et al. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01819 · Cited by 150
Self-citation
Cited by
Electrolyte Solvation Structure Design for Sodium Ion Batteries
Tian, Z., Zou, Y., Liu, G., Wang, Y., Yin, J., Ming, J., & Alshareef, H. N. (2022) · Advanced Science · doi:10.1002/advs.202201207 · Cited by 671
Self-citationEmerging Era of Electrolyte Solvation Structure and Interfacial Model in Batteries
Cheng, H., Sun, Q., Li, L., Zou, Y., Wang, Y., Cai, T., Zhao, F., Liu, G., Ma, Z., Wahyudi, W., et al. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.1c02425 · Cited by 640
Self-citationRecent advances in rational design for high-performance potassium-ion batteries
Xu, Y., Du, Y., Chen, H., Chen, J., Ding, T., Sun, D., Kim, D. H., Lin, Z., & Zhou, X. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00601h · Cited by 367
Gel polymer electrolytes for rechargeable batteries toward wide-temperature applications
Zhou, X., Zhou, Y., Yu, L., Qi, L., Oh, K.-S., Hu, P., Lee, S.-Y., & Chen, C. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00551h · Cited by 333
Low‐Temperature Electrolyte Design for Lithium‐Ion Batteries: Prospect and Challenges
Li, Q., Liu, G., Cheng, H., Sun, Q., Zhang, J., & Ming, J. (2021) · Chemistry – A European Journal · doi:10.1002/chem.202101407 · Cited by 268
Self-citation
Metadata
- Authors
- Zhou, L., Cao, Z., Wahyudi, W., Zhang, J., Hwang, J.-Y., Cheng, Y., Wang, L., Cavallo, L., Anthopoulos, T., Sun, Y.-K., Alshareef, H. N., & Ming, J.
- Venue
- ACS Energy Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-02-10
- Volume
- 5
- Issue
- 3
- Pages
- 766-776
- ISSN
- 2380-8195 (ISSN-L)
- OpenAlex
- W3006502601
- Cited by
- 216
- References
- 6
- FWCI
- 11.14
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Electrolyte Engineering Enables High Stability and Capacity Alloying Anodes for Sodium and Potassium Ion Batteries. https://app.cochat.ai/papers/10.1021/acsenergylett.0c00148
- The paper
- Zhou, L., Cao, Z., Wahyudi, W., Zhang, J., Hwang, J.-Y., Cheng, Y., Wang, L., Cavallo, L., Anthopoulos, T., Sun, Y.-K., Alshareef, H. N., & Ming, J. (2020). Electrolyte Engineering Enables High Stability and Capacity Alloying Anodes for Sodium and Potassium Ion Batteries. ACS Energy Letters. https://doi.org/10.1021/acsenergylett.0c00148
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.