Perovskite/CIGS Tandem Solar Cells: From Certified 24.2% toward 30% and Beyond
Open accessThe DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Abstract
High Resolution Image Download MS PowerPoint Slide We demonstrate a monolithic perovskite/CIGS tandem solar cell with a certified power conversion efficiency (PCE) of 24.2%. The tandem solar cell still exhibits photocurrent mismatch between the subcells; thus optical simulations are used to determine the optimal device stack. Results reveal a high optical potential with the optimized device reaching a short-circuit current density of 19.9 mA cm –2 and 32% PCE based on semiempirical material properties. To evaluate its energy yield, we first determine the CIGS temperature coefficient, which is at −0.38% K –1 notably higher than the one from the perovskite subcell (−0.22% K –1 ), favoring perovskite in the field operation at elevated cell temperatures. Both single-junction cells, however, are significantly outperformed by the combined tandem device. The enhancement in energy output is more than 50% in the case of CIGS single-junction device. The results demonstrate the high potential of perovskite/CIGS tandem solar cells, for which we describe optical guidelines toward 30% PCE.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
McMeekin, D. P., Sadoughi, G., Rehman, W., Eperon, G. E., Saliba, M., Hörantner, M. T., Haghighirad, A., Sakai, N., Korte, L., Rech, B., et al. (2016) · Science · doi:10.1126/science.aad5845 · Cited by 3,067
Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction
Al-Ashouri, A., Köhnen, E., Li, B., Magomedov, A., Hempel, H., Caprioglio, P., Márquez, J. A., Morales Vilches, A. B., Kasparavicius, E., Smith, J. A., et al. (2020) · Science · doi:10.1126/science.abd4016 · Cited by 2,095
Self-citationInkjet printing of single-crystal films
Minemawari, H., Yamada, T., Matsui, H., Tsutsumi, J., Haas, S., Chiba, R., Kumai, R., & Hasegawa, T. (2011) · Nature · doi:10.1038/nature10313 · Cited by 1,707
Sahli, F., Werner, J., Kamino, B. A., Bräuninger, M., Monnard, R., Paviet-Salomon, B., Barraud, L., Ding, L., Diaz Leon, J. J., Sacchetto, D., et al. (2018) · Nature Materials · doi:10.1038/s41563-018-0115-4 · Cited by 1,380
Cd-Free Cu(In,Ga)(Se,S)2 Thin-Film Solar Cell With Record Efficiency of 23.35%
Nakamura, M., Yamaguchi, K., Kimoto, Y., Yasaki, Y., Kato, T., & Sugimoto, H. (2019) · IEEE Journal of Photovoltaics · doi:10.1109/jphotov.2019.2937218 · Cited by 1,323
Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells
Chirilă, A., Reinhard, P., Pianezzi, F., Bloesch, P., Uhl, A. R., Fella, C., Kranz, L., Keller, D., Gretener, C., Hagendorfer, H., et al. (2013) · Nature Materials · doi:10.1038/nmat3789 · Cited by 1,285
Solar cell efficiency tables (version 57)
Green, M. A., Dunlop, E. D., Hohl‐Ebinger, J., Yoshita, M., Kopidakis, N., & Hao, X. (2020) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.3371 · Cited by 1,237
Al-Ashouri, A., Magomedov, A., Roß, M., Jošt, M., Talaikis, M., Chistiakova, G., Bertram, T., Márquez, J. A., Köhnen, E., Kasparavičius, E., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee02268f · Cited by 1,214
Self-citationTriple-halide wide–band gap perovskites with suppressed phase segregation for efficient tandems
Xu, J., Boyd, C. C., Yu, Z. J., Palmstrom, A. F., Witter, D. J., Larson, B. W., France, R. M., Werner, J., Harvey, S. P., Wolf, E. J., et al. (2020) · Science · doi:10.1126/science.aaz5074 · Cited by 1,080
Stolterfoht, M., Wolff, C. M., Márquez, J. A., Zhang, S., Hages, C. J., Rothhardt, D., Albrecht, S., Burn, P. L., Meredith, P., Unold, T., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0219-8 · Cited by 1,007
Self-citationCopper indium gallium selenide based solar cells – a review
Ramanujam, J., & Singh, U. P. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00826k · Cited by 789
Efficient tandem solar cells with solution-processed perovskite on textured crystalline silicon
Hou, Y., Aydin, E., De Bastiani, M., Xiao, C., Isikgor, F. H., Xue, D.-J., Chen, B., Chen, H., Bahrami, B., Chowdhury, A. H., et al. (2020) · Science · doi:10.1126/science.aaz3691 · Cited by 789
Saliba, M., Correa-Baena, J.-P., Wolff, C. M., Stolterfoht, M., Phung, N., Albrecht, S., Neher, D., & Abate, A. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b00136 · Cited by 618
Self-citationLöper, P., Stuckelberger, M., Niesen, B., Werner, J., Filipič, M., Moon, S.-J., Yum, J.-H., Topič, M., De Wolf, S., & Ballif, C. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502471h · Cited by 587
Self-citationJošt, M., Kegelmann, L., Korte, L., & Albrecht, S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904102 · Cited by 538
Self-citationHigh-performance perovskite/Cu(In,Ga)Se 2 monolithic tandem solar cells
Han, Q., Hsieh, Y.-T., Meng, L., Wu, J.-L., Sun, P., Yao, E.-P., Chang, S.-Y., Bae, S.-H., Kato, T., Bermudez, V., et al. (2018) · Science · doi:10.1126/science.aat5055 · Cited by 451
Gharibzadeh, S., Abdollahi Nejand, B., Jakoby, M., Abzieher, T., Hauschild, D., Moghadamzadeh, S., Schwenzer, J. A., Brenner, P., Schmager, R., Haghighirad, A. A., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803699 · Cited by 435
Jošt, M., Köhnen, E., Morales-Vilches, A. B., Lipovšek, B., Jäger, K., Macco, B., Al-Ashouri, A., Krč, J., Korte, L., Rech, B., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02469c · Cited by 379
Self-citationOpen-Circuit Voltages Exceeding 1.26 V in Planar Methylammonium Lead Iodide Perovskite Solar Cells
Liu, Z., Krückemeier, L., Krogmeier, B., Klingebiel, B., Márquez, J. A., Levcenko, S., Öz, S., Mathur, S., Rau, U., Unold, T., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01906 · Cited by 365
Bimolecular Additives Improve Wide-Band-Gap Perovskites for Efficient Tandem Solar Cells with CIGS
Kim, D. H., Muzzillo, C. P., Tong, J., Palmstrom, A. F., Larson, B. W., Choi, C., Harvey, S. P., Glynn, S., Whitaker, J. B., Zhang, F., et al. (2019) · Joule · doi:10.1016/j.joule.2019.04.012 · Cited by 342
Köhnen, E., Jošt, M., Morales‐Vilches, A. B., Tockhorn, P., Al‐Ashouri, A., Macco, B., Kegelmann, L., Korte, L., Rech, B., Schlatmann, R., et al. (2019) · Sustainable Energy & Fuels · doi:10.1039/c9se00120d · Cited by 312
Self-citationMazzarella, L., Lin, Y., Kirner, S., Morales‐Vilches, A. B., Korte, L., Albrecht, S., Crossland, E., Stannowski, B., Case, C., Snaith, H. J., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803241 · Cited by 311
Self-citationGharibzadeh, S., Fassl, P., Hossain, I. M., Rohrbeck, P., Frericks, M., Schmidt, M., Duong, T., Khan, M. R., Abzieher, T., Nejand, B. A., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01508g · Cited by 289
Monolithic Perovskite‐CIGS Tandem Solar Cells via In Situ Band Gap Engineering
Todorov, T. K., Gershon, T., Gunawan, O., Lee, Y. S., Sturdevant, C., Chang, L., & Guha, S. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500799 · Cited by 280
Hörantner, M. T., & Snaith, H. J. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01232b · Cited by 269
How to Report Record Open‐Circuit Voltages in Lead‐Halide Perovskite Solar Cells
Krückemeier, L., Rau, U., Stolterfoht, M., & Kirchartz, T. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902573 · Cited by 244
Jošt, M., Bertram, T., Koushik, D., Marquez, J. A., Verheijen, M. A., Heinemann, M. D., Köhnen, E., Al‐Ashouri, A., Braunger, S., Lang, F., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00135 · Cited by 235
Self-citationProton Radiation Hardness of Perovskite Tandem Photovoltaics
Lang, F., Jošt, M., Frohna, K., Köhnen, E., Al‐Ashouri, A., Bowman, A. R., Bertram, T., Morales‐Vilches, A. B., Koushik, D., Tennyson, E. M., et al. (2020) · Joule · doi:10.1016/j.joule.2020.03.006 · Cited by 203
Self-citationOverview of Temperature Coefficients of Different Thin Film Photovoltaic Technologies
Virtuani, A., Pavanello, D., & Friesen, G. (2010) · EU PVSEC · doi:10.4229/25theupvsec2010-4av.3.83 · Cited by 180
Perovskite Solar Cells go Outdoors: Field Testing and Temperature Effects on Energy Yield
Jošt, M., Lipovšek, B., Glažar, B., Al‐Ashouri, A., Brecl, K., Matič, G., Magomedov, A., Getautis, V., Topič, M., & Albrecht, S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000454 · Cited by 180
Self-citationLang, F., Jošt, M., Bundesmann, J., Denker, A., Albrecht, S., Landi, G., Neitzert, H. C., Rappich, J., & Nickel, N. H. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00077a · Cited by 150
Self-citationEfficient Light Management by Textured Nanoimprinted Layers for Perovskite Solar Cells
Jošt, M., Albrecht, S., Kegelmann, L., Wolff, C. M., Lang, F., Lipovšek, B., Krč, J., Korte, L., Neher, D., Rech, B., et al. (2017) · ACS Photonics · doi:10.1021/acsphotonics.7b00138 · Cited by 127
Self-citationTechno-economic viability of silicon-based tandem photovoltaic modules in the United States
Yu, Z. J., Carpenter, J. V., & Holman, Z. C. (2018) · Nature Energy · doi:10.1038/s41560-018-0201-5 · Cited by 124
Impact of Ultrathin C 60 on Perovskite Photovoltaic Devices
Liu, D., Wang, Q., Traverse, C. J., Yang, C., Young, M., Kuttipillai, P. S., Lunt, S. Y., Hamann, T. W., & Lunt, R. R. (2017) · ACS Nano · doi:10.1021/acsnano.7b08561 · Cited by 120
Tejada, A., Braunger, S., Korte, L., Albrecht, S., Rech, B., & Guerra, J. A. (2018) · Journal of Applied Physics · doi:10.1063/1.5025728 · Cited by 42
Self-citation
Cited by
Solar Cell Efficiency Tables (Version 66)
Green, M. A., Dunlop, E. D., Yoshita, M., Kopidakis, N., Bothe, K., Siefer, G., Hao, X., & Jiang, J. Y. (2025) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.3919 · Cited by 766
Li, M., Liu, M., Qi, F., Lin, F. R., & Jen, A. K.-Y. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00396 · Cited by 642
Solar cell efficiency tables (Version 63)
Green, M. A., Dunlop, E. D., Yoshita, M., Kopidakis, N., Bothe, K., Siefer, G., & Hao, X. (2024) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.3750 · Cited by 588
Solar cell efficiency tables (version 62)
Green, M. A., Dunlop, E. D., Yoshita, M., Kopidakis, N., Bothe, K., Siefer, G., & Hao, X. (2023) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.3726 · Cited by 564
Next-generation applications for integrated perovskite solar cells
Bati, A. S. R., Zhong, Y. L., Burn, P. L., Nazeeruddin, M. K., Shaw, P. E., & Batmunkh, M. (2023) · Communications Materials · doi:10.1038/s43246-022-00325-4 · Cited by 492
Metadata
- Authors
- Jošt, M., Köhnen, E., Al-Ashouri, A., Bertram, T., Tomšič, Š., Magomedov, A., Kasparavicius, E., Kodalle, T., Lipovšek, B., Getautis, V., Schlatmann, R., Kaufmann, C. A., Albrecht, S., & Topič, M.
- Venue
- ACS Energy Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2022-03-09
- Volume
- 7
- Issue
- 4
- Pages
- 1298-1307
- ISSN
- 2380-8195 (ISSN-L)
- OpenAlex
- W4220909158
- Cited by
- 376
- References
- 35
- FWCI
- 21.08
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.