The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Bimolecular Additives Improve Wide-Band-Gap Perovskites for Efficient Tandem Solar Cells with CIGS
Open accessAbstract
Summary Tandem solar cells coupling narrow- and wide-band-gap thin-film polycrystalline absorbers are attractive for achieving ultrahigh efficiency with low manufacturing cost. For established narrow-band-gap CIGS thin-film bottom cells, a challenge is to develop highly efficient polycrystalline wide-band-gap top cells. Here, we demonstrate a 1.68-eV (FA0.65MA0.20Cs0.15)Pb(I0.8Br0.2)3 wide-band-gap perovskite solar cell with an efficiency of ∼20% enabled by using PEAI and Pb(SCN)2 complementary additives in the perovskite precursor. The coupling of PEA+ and SCN− provides a synergistic effect that overcomes growth challenges with either additive individually and improves perovskite film quality with enhanced crystallinity, reduced formation of excess PbI2 (in comparison to using Pb(SCN)2 additive alone), lower defect density and energetic disorder, and an improved carrier mobility (∼47 cm2 V−1s−1) and lifetime (∼2.9 μs). When coupling a semi-transparent 1.68-eV perovskite top cell fabricated by this approach with a 1.12-eV CIGS bottom cell, we achieve 25.9%-efficient polycrystalline perovskite/CIGS 4-terminal thin-film tandem solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells
Tsai, H., Nie, W., Blancon, J.-C., Stoumpos, C. C., Asadpour, R., Harutyunyan, B., Neukirch, A. J., Verduzco, R., Crochet, J. J., Tretiak, S., et al. (2016) · Nature · doi:10.1038/nature18306 · Cited by 3,384
A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
McMeekin, D. P., Sadoughi, G., Rehman, W., Eperon, G. E., Saliba, M., Hörantner, M. T., Haghighirad, A., Sakai, N., Korte, L., Rech, B., et al. (2016) · Science · doi:10.1126/science.aad5845 · Cited by 3,067
Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber
Yin, W.-J., Shi, T., & Yan, Y. (2014) · Applied Physics Letters · doi:10.1063/1.4864778 · Cited by 2,707
Self-citationReversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics
Hoke, E. T., Slotcavage, D. J., Dohner, E. R., Bowring, A. R., Karunadasa, H. I., & McGehee, M. D. (2015) · Chemical Science · doi:10.1039/c4sc03141e · Cited by 2,295
2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
Ruddlesden–Popper Hybrid Lead Iodide Perovskite 2D Homologous Semiconductors
Stoumpos, C. C., Cao, D. H., Clark, D. J., Young, J., Rondinelli, J. M., Jang, J. I., Hupp, J. T., & Kanatzidis, M. G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00847 · Cited by 2,130
One-Year stable perovskite solar cells by 2D/3D interface engineering
Grancini, G., Roldán-Carmona, C., Zimmermann, I., Mosconi, E., Lee, X., Martineau, D., Narbey, S., Oswald, F., De Angelis, F., Graetzel, M., et al. (2017) · Nature Communications · doi:10.1038/ncomms15684 · Cited by 2,068
Maximizing and stabilizing luminescence from halide perovskites with potassium passivation
Abdi-Jalebi, M., Andaji-Garmaroudi, Z., Cacovich, S., Stavrakas, C., Philippe, B., Richter, J. M., Alsari, M., Booker, E. P., Hutter, E. M., Pearson, A. J., et al. (2018) · Nature · doi:10.1038/nature25989 · Cited by 1,734
Cited by
Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells
Jeong, J., Kim, M., Seo, J., Lu, H., Ahlawat, P., Mishra, A., Yang, Y., Hope, M. A., Eickemeyer, F. T., Kim, M., et al. (2021) · Nature · doi:10.1038/s41586-021-03406-5 · Cited by 3,072
Self-citationTriple-halide wide–band gap perovskites with suppressed phase segregation for efficient tandems
Xu, J., Boyd, C. C., Yu, Z. J., Palmstrom, A. F., Witter, D. J., Larson, B. W., France, R. M., Werner, J., Harvey, S. P., Wolf, E. J., et al. (2020) · Science · doi:10.1126/science.aaz5074 · Cited by 1,080
Self-citationScalable fabrication and coating methods for perovskite solar cells and solar modules
Park, N.-G., & Zhu, K. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0176-2 · Cited by 908
Self-citationBimolecularly passivated interface enables efficient and stable inverted perovskite solar cells
Liu, C., Yang, Y., Chen, H., Xu, J., Liu, A., Bati, A. S. R., Zhu, H., Grater, L., Hadke, S. S., Huang, C., et al. (2023) · Science · doi:10.1126/science.adk1633 · Cited by 757
Understanding of perovskite crystal growth and film formation in scalable deposition processes
Liu, C., Cheng, Y.-B., & Ge, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00711c · Cited by 675
Metadata
- Authors
- Kim, D. H., Muzzillo, C. P., Tong, J., Palmstrom, A. F., Larson, B. W., Choi, C., Harvey, S. P., Glynn, S., Whitaker, J. B., Zhang, F., Li, Z., Lu, H., van Hest, M. F. A. M., Berry, J. J., Mansfield, L. M., Huang, Y., Yan, Y., & Zhu, K.
- Venue
- Joule
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 3
- Issue
- 7
- Pages
- 1734-1745
- ISSN
- 2542-4351 (ISSN-L)
- OpenAlex
- W2947157577
- Cited by
- 342
- References
- 46
- FWCI
- 13.83
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Bimolecular Additives Improve Wide-Band-Gap Perovskites for Efficient Tandem Solar Cells with CIGS. https://app.cochat.ai/papers/10.1016/j.joule.2019.04.012
- The paper
- Kim, D. H., Muzzillo, C. P., Tong, J., Palmstrom, A. F., Larson, B. W., Choi, C., Harvey, S. P., Glynn, S., Whitaker, J. B., Zhang, F., Li, Z., Lu, H., van Hest, M. F. A. M., Berry, J. J., Mansfield, L. M., Huang, Y., Yan, Y., & Zhu, K. (2019). Bimolecular Additives Improve Wide-Band-Gap Perovskites for Efficient Tandem Solar Cells with CIGS. Joule. https://doi.org/10.1016/j.joule.2019.04.012
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.