The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Single-Ion Conducting Polymer Electrolytes for Lithium Metal Polymer Batteries that Operate at Ambient Temperature
Abstract
Safety issues rising from the use of conventional liquid electrolytes in lithium-based batteries are currently limiting their application to electric vehicles and large-scale energy storage from renewable sources. Polymeric electrolytes represent a solution to this problem due to their intrinsic safety. Ideally, polymer electrolytes should display both high lithium transference number ( t Li + ) and ionic conductivity. Practically, strategies for increasing t Li + often result in low ionic conductivity and vice versa. Herein, networked polymer electrolytes simultaneously displaying t Li + approaching unity and high ionic conductivity (σ ≈ 10 –4 S cm –1 at 25 °C) are presented. Lithium cells operating at room temperature demonstrate the promising prospect of these materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Electrolytes for solid-state lithium rechargeable batteries: recent advances and perspectives
Quartarone, E., & Mustarelli, P. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00081g · Cited by 1,607
Single-ion BAB triblock copolymers as highly efficient electrolytes for lithium-metal batteries
Bouchet, R., Maria, S., Meziane, R., Aboulaich, A., Lienafa, L., Bonnet, J.-P., Phan, T. N. T., Bertin, D., Gigmes, D., Devaux, D., et al. (2013) · Nature Materials · doi:10.1038/nmat3602 · Cited by 1,425
Electrode–Electrolyte Interface in Li-Ion Batteries: Current Understanding and New Insights
Gauthier, M., Carney, T. J., Grimaud, A., Giordano, L., Pour, N., Chang, H.-H., Fenning, D. P., Lux, S. F., Paschos, O., Bauer, C., et al. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01727 · Cited by 1,028
Thin, Flexible Secondary Li-Ion Paper Batteries
Hu, L., Wu, H., La Mantia, F., Yang, Y., & Cui, Y. (2010) · ACS Nano · doi:10.1021/nn1018158 · Cited by 869
Hallinan, D. T., & Balsara, N. P. (2013) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-071312-121705 · Cited by 853
Ionic‐Liquid‐Based Polymer Electrolytes for Battery Applications
Osada, I., de Vries, H., Scrosati, B., & Passerini, S. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201504971 · Cited by 800
Recent Advances in Innovative Polymer Electrolytes based on Poly(ionic liquid)s
Shaplov, A. S., Marcilla, R., & Mecerreyes, D. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.03.038 · Cited by 471
Self-citationInterfacial Challenges in Solid-State Li Ion Batteries
Luntz, A. C., Voss, J., & Reuter, K. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02352 · Cited by 461
Cited by
Designing solid-state electrolytes for safe, energy-dense batteries
Zhao, Q., Stalin, S., Zhao, C.-Z., & Archer, L. A. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0165-5 · Cited by 2,372
Designing polymers for advanced battery chemistries
Lopez, J., Mackanic, D. G., Cui, Y., & Bao, Z. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0103-6 · Cited by 894
Promising Routes to a High Li+ Transference Number Electrolyte for Lithium Ion Batteries
Diederichsen, K. M., McShane, E. J., & McCloskey, B. D. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00792 · Cited by 874
The Compensation Effect in the Vogel–Tammann–Fulcher (VTF) Equation for Polymer-Based Electrolytes
Diederichsen, K. M., Buss, H. G., & McCloskey, B. D. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b00423 · Cited by 386
In situ polymerization process: an essential design tool for lithium polymer batteries
Vijayakumar, V., Anothumakkool, B., Kurungot, S., Winter, M., & Nair, J. R. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03527k · Cited by 365
Self-citation
Metadata
- Authors
- Porcarelli, L., Shaplov, A. S., Bella, F., Nair, J. R., Mecerreyes, D., & Gerbaldi, C.
- Venue
- ACS Energy Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-09-07
- Volume
- 1
- Issue
- 4
- Pages
- 678-682
- ISSN
- 2380-8195 (ISSN-L)
- OpenAlex
- W2510883737
- Cited by
- 312
- References
- 24
- FWCI
- 14.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Single-Ion Conducting Polymer Electrolytes for Lithium Metal Polymer Batteries that Operate at Ambient Temperature. https://app.cochat.ai/papers/10.1021/acsenergylett.6b00216
- The paper
- Porcarelli, L., Shaplov, A. S., Bella, F., Nair, J. R., Mecerreyes, D., & Gerbaldi, C. (2016). Single-Ion Conducting Polymer Electrolytes for Lithium Metal Polymer Batteries that Operate at Ambient Temperature. ACS Energy Letters. https://doi.org/10.1021/acsenergylett.6b00216
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
