The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Energy-Down-Shift CsPbCl3:Mn Quantum Dots for Boosting the Efficiency and Stability of Perovskite Solar Cells
Abstract
Parasitic absorption by window layer, electrode layer, and interface layer in the near ultraviolet (UV) region is no longer negligible for high-efficiency perovskite solar cells. On the other hand, UV-induced degradation is also a big component of cell instability. Herein, CsPbCl 3:Mn-based quantum dots (QDs) are synthesized and applied onto the front side of the perovskite solar cells as the energy-down-shift (EDS) layer. It is found that with very high quantum yield (∼60%) and larger Stokes shift (>200 nm), the CsPbCl 3:Mn QDs effectively convert the normally wasted energy in the UV region (300–400 nm) into usable visible light at ∼590 nm for enhanced power conversion efficiency (PCE). Meanwhile, conversion of the UV rays eliminated a significant loss mechanism that deteriorates perovskite stability. As a result, external quantum efficiency in the UV region is significantly increased, leading to an increased short-circuit current (3.77%) and PCE (3.34%). Furthermore, the stability of perovskite solar cells has also been improved from 85% to 97% of their initial efficiency after exposure in the UV region with 5 mW/cm 2 intensity by 100 h. In parallel, the organic and silicon solar cells coated by EDS QDs also both confirm the above conclusion with PCE enhancements of 3.21% and 2.98%, respectively. These results suggest that the CsPbCl 3:Mn QDs play a significant role in improving the efficiency and stability of photovoltaic devices. To our knowledge, this is the first report about CsPbCl 3:Mn QD-assisted perovskite solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Krieg, F., Caputo, R., Hendon, C. H., Yang, R. X., Walsh, A., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/nl5048779 · Cited by 9,209
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
Electron-hole diffusion lengths > 175 μm in solution-grown CH 3 NH 3 PbI 3 single crystals
Dong, Q., Fang, Y., Shao, Y., Mulligan, P., Qiu, J., Cao, L., & Huang, J. (2015) · Science · doi:10.1126/science.aaa5760 · Cited by 5,643
Li, X., Wu, Y., Zhang, S., Cai, B., Gu, Y., Song, J., & Zeng, H. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600109 · Cited by 2,545
Nedelcu, G., Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Grotevent, M. J., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02404 · Cited by 2,356
Efficient and stable solution-processed planar perovskite solar cells via contact passivation
Tan, H., Jain, A., Voznyy, O., Lan, X., García de Arquer, F. P., Fan, J. Z., Quintero-Bermudez, R., Yuan, M., Zhang, B., Zhao, Y., et al. (2017) · Science · doi:10.1126/science.aai9081 · Cited by 2,342
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Chen, W., Wu, Y., Yue, Y., Liu, J., Zhang, W., Yang, X., Chen, H., Bi, E., Ashraful, I., Grätzel, M., et al. (2015) · Science · doi:10.1126/science.aad1015 · Cited by 2,279
Akkerman, Q. A., D’Innocenzo, V., Accornero, S., Scarpellini, A., Petrozza, A., Prato, M., & Manna, L. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b05602 · Cited by 2,197
Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers
You, J., Meng, L., Song, T.-B., Guo, T.-F., Yang, Y. (., Chang, W.-H., Hong, Z., Chen, H., Zhou, H., Chen, Q., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.230 · Cited by 2,123
Jiang, Q., Zhang, L., Wang, H., Yang, X., Meng, J., Liu, H., Yin, Z., Wu, J., Zhang, X., & You, J. (2016) · Nature Energy · doi:10.1038/nenergy.2016.177 · Cited by 2,024
Self-citationReview of recent progress in chemical stability of perovskite solar cells
Niu, G., Guo, X., & Wang, L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04994b · Cited by 1,965
Leijtens, T., Eperon, G. E., Pathak, S., Abate, A., Lee, M. M., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3885 · Cited by 1,867
23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability
Bush, K. A., Palmstrom, A. F., Yu, Z. J., Boccard, M., Cheacharoen, R., Mailoa, J. P., McMeekin, D. P., Hoye, R. L. Z., Bailie, C. D., Leijtens, T., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.9 · Cited by 1,545
Halide perovskite materials for solar cells: a theoretical review
Yin, W.-J., Yang, J.-H., Kang, J., Yan, Y., & Wei, S.-H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05033a · Cited by 1,437
Colloidally prepared La-doped BaSnO 3 electrodes for efficient, photostable perovskite solar cells
Shin, S. S., Yeom, E. J., Yang, W. S., Hur, S., Kim, M. G., Im, J., Seo, J., Noh, J. H., & Seok, S. I. (2017) · Science · doi:10.1126/science.aam6620 · Cited by 1,163
Niu, G., Li, W., Meng, F., Wang, L., Dong, H., & Qiu, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta13606j · Cited by 1,075
Bin, H., Gao, L., Zhang, Z.-G., Yang, Y., Zhang, Y., Zhang, C., Chen, S., Xue, L., Yang, C., Xiao, M., et al. (2016) · Nature Communications · doi:10.1038/ncomms13651 · Cited by 987
Self-citationMn2+-Doped Lead Halide Perovskite Nanocrystals with Dual-Color Emission Controlled by Halide Content
Liu, W., Lin, Q., Li, H., Wu, K., Robel, I., Pietryga, J. M., & Klimov, V. I. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08085 · Cited by 898
Improving efficiency and stability of perovskite solar cells with photocurable fluoropolymers
Bella, F., Griffini, G., Correa-Baena, J.-P., Saracco, G., Grätzel, M., Hagfeldt, A., Turri, S., & Gerbaldi, C. (2016) · Science · doi:10.1126/science.aah4046 · Cited by 870
Light-activated photocurrent degradation and self-healing in perovskite solar cells
Nie, W., Blancon, J.-C., Neukirch, A. J., Appavoo, K., Tsai, H., Chhowalla, M., Alam, M. A., Sfeir, M. Y., Katan, C., Even, J., et al. (2016) · Nature Communications · doi:10.1038/ncomms11574 · Cited by 743
Li, X., Cao, F., Yu, D., Chen, J., Sun, Z., Shen, Y., Zhu, Y., Wang, L., Wei, Y., Wu, Y., et al. (2017) · Small · doi:10.1002/smll.201603996 · Cited by 704
Exciton-to-Dopant Energy Transfer in Mn-Doped Cesium Lead Halide Perovskite Nanocrystals
Parobek, D., Roman, B. J., Dong, Y., Jin, H., Lee, E., Sheldon, M., & Son, D. H. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b02772 · Cited by 670
High‐Quality Whispering‐Gallery‐Mode Lasing from Cesium Lead Halide Perovskite Nanoplatelets
Zhang, Q., Su, R., Liu, X., Xing, J., Sum, T. C., & Xiong, Q. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201601690 · Cited by 668
Li, W., Zhang, W., Van Reenen, S., Sutton, R. J., Fan, J., Haghighirad, A. A., Johnston, M. B., Wang, L., & Snaith, H. J. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03522h · Cited by 615
CsPbxMn1–xCl3 Perovskite Quantum Dots with High Mn Substitution Ratio
Liu, H., Wu, Z., Shao, J., Yao, D., Gao, H., Liu, Y., Yu, W., Zhang, H., & Yang, B. (2017) · ACS Nano · doi:10.1021/acsnano.6b08747 · Cited by 587
The efficiency limit of CH3NH3PbI3 perovskite solar cells
Sha, W. E. I., Ren, X., Chen, L., & Choy, W. C. H. (2015) · Applied Physics Letters · doi:10.1063/1.4922150 · Cited by 571
Optical properties and limiting photocurrent of thin-film perovskite solar cells
Ball, J. M., Stranks, S. D., Hörantner, M. T., Hüttner, S., Zhang, W., Crossland, E. J. W., Ramirez, I., Riede, M., Johnston, M. B., Friend, R. H., et al. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03224a · Cited by 528
Yoon, J., Sung, H., Lee, G., Cho, W., Ahn, N., Jung, H. S., & Choi, M. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02650h · Cited by 469
Fully Printable Mesoscopic Perovskite Solar Cells with Organic Silane Self-Assembled Monolayer
Liu, L., Mei, A., Liu, T., Jiang, P., Sheng, Y., Zhang, L., & Han, H. (2015) · Journal of the American Chemical Society · doi:10.1021/ja5125594 · Cited by 460
Advances in hole transport materials engineering for stable and efficient perovskite solar cells
Bakr, Z. H., Wali, Q., Fakharuddin, A., Schmidt-Mende, L., Brown, T. M., & Jose, R. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.02.025 · Cited by 455
Doping Mn2+ in Lead Halide Perovskite Nanocrystals: Successes and Challenges
Guria, A. K., Dutta, S. K., Adhikari, S. D., & Pradhan, N. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00177 · Cited by 452
Colloidal Mn-Doped Cesium Lead Halide Perovskite Nanoplatelets
Mir, W. J., Jagadeeswararao, M., Das, S., & Nag, A. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00741 · Cited by 420
Zhang, H., Wang, X., Liao, Q., Xu, Z., Li, H., Zheng, L., & Fu, H. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604382 · Cited by 416
Yeo, J.-S., Kang, R., Lee, S., Jeon, Y.-J., Myoung, N., Lee, C.-L., Kim, D.-Y., Yun, J.-M., Seo, Y.-H., Kim, S.-S., et al. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.12.022 · Cited by 358
Zhang, H., Wang, H., Chen, W., & Jen, A. K. ‐. (2017) · Advanced Materials · doi:10.1002/adma.201604984 · Cited by 335
High‐Temperature Photoluminescence of CsPbX3 (X = Cl, Br, I) Nanocrystals
Diroll, B. T., Nedelcu, G., Kovalenko, M. V., & Schaller, R. D. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606750 · Cited by 320
Transparent Conductive Oxide‐Free Graphene‐Based Perovskite Solar Cells with over 17% Efficiency
Sung, H., Ahn, N., Jang, M. S., Lee, J., Yoon, H., Park, N., & Choi, M. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501873 · Cited by 263
Feng, J., Yang, Z., Yang, D., Ren, X., Zhu, X., Jin, Z., Zi, W., Wei, Q., & Liu, S. (. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.04.010 · Cited by 260
Self-citationLi, H., Shi, W., Huang, W., Yao, E.-P., Han, J., Chen, Z., Liu, S., Shen, Y., Wang, M., & Yang, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b05177 · Cited by 251
Self-citationPark, Y. H., Jeong, I., Bae, S., Son, H. J., Lee, P., Lee, J., Lee, C., & Ko, M. J. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605988 · Cited by 249
Patterning Multicolored Microdisk Laser Arrays of Cesium Lead Halide Perovskite
He, X., Liu, P., Zhang, H., Liao, Q., Yao, J., & Fu, H. (2017) · Advanced Materials · doi:10.1002/adma.201604510 · Cited by 232
Ag-Incorporated Organic–Inorganic Perovskite Films and Planar Heterojunction Solar Cells
Chen, Q., Chen, L., Ye, F., Zhao, T., Tang, F., Rajagopal, A., Jiang, Z., Jiang, S., Jen, A. K.-Y., Xie, Y., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00847 · Cited by 178
Lu, J., Sheng, X., Tong, G., Yu, Z., Sun, X., Yu, L., Xu, X., Wang, J., Xu, J., Shi, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700400 · Cited by 157
Jiang, J., Jin, Z., Lei, J., Wang, Q., Zhang, X., Zhang, J., Gao, F., & Liu, S. F. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01636k · Cited by 114
Self-citationQue, M., Que, W., Yin, X., Chen, P., Yang, Y., Hu, J., Yu, B., & Du, Y. (2016) · Nanoscale · doi:10.1039/c6nr03021a · Cited by 55
Jalalah, M., Ko, Y., Harraz, F. A., Al-Assiri, M. S., & Park, J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.048 · Cited by 37
Nandi, A., Majumdar, S., Datta, S. K., Saha, H., & Hossain, S. M. (2016) · Journal of Materials Chemistry C · doi:10.1039/c6tc04030f · Cited by 19
Cited by
Long-term operating stability in perovskite photovoltaics
Zhu, H., Teale, S., Lintangpradipto, M. N., Mahesh, S., Chen, B., McGehee, M. D., Sargent, E. H., & Bakr, O. M. (2023) · Nature Reviews Materials · doi:10.1038/s41578-023-00582-w · Cited by 739
Metal-Doped Lead Halide Perovskites: Synthesis, Properties, and Optoelectronic Applications
Zhou, Y., Chen, J., Bakr, O. M., & Sun, H.-T. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b02989 · Cited by 650
Doping and ion substitution in colloidal metal halide perovskite nanocrystals
Lu, C.-H., Biesold-McGee, G. V., Liu, Y., Kang, Z., & Lin, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00790c · Cited by 484
Polymer Doping for High‐Efficiency Perovskite Solar Cells with Improved Moisture Stability
Jiang, J., Wang, Q., Jin, Z., Zhang, X., Lei, J., Bin, H., Zhang, Z., Li, Y., & Liu, S. (. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701757 · Cited by 379
Self-citationHalide perovskites for high-performance X-ray detector
Li, Z., Zhou, F., Yao, H., Ci, Z., Yang, Z., & Jin, Z. (2021) · Materials Today · doi:10.1016/j.mattod.2021.01.028 · Cited by 370
Self-citation
Metadata
- Authors
- Wang, Q., Zhang, X., Jin, Z., Zhang, J., Gao, Z., Li, Y., & Liu, S. F.
- Venue
- ACS Energy Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-06-01
- Volume
- 2
- Issue
- 7
- Pages
- 1479-1486
- ISSN
- 2380-8195 (ISSN-L)
- OpenAlex
- W2620209849
- Cited by
- 270
- References
- 50
- FWCI
- 15.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.