The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Metal–Organic Framework-Based Separators for Enhancing Li–S Battery Stability: Mechanism of Mitigating Polysulfide Diffusion
Abstract
The shuttling effect of polysulfides severely hinders the cycle performance and commercialization of Li–S batteries, and significant efforts have been devoted to searching for feasible solutions to mitigate the effect in the past two decades. Recently, metal–organic frameworks (MOFs) with rich porosity, nanometer cavity sizes, and high surface areas have been claimed to be effective in suppressing polysulfide migration. However, the formation of large-scale and grain boundary-free MOFs is still very challenging, where a large number of grain boundaries of MOF particles may also allow the diffusion of polysulfides. Hence, it is still controversial whether the pores in MOFs or the grain boundaries play the critical role. In this study, we perform a comparative study for several commonly used MOFs, and our experimental results and analysis prove that a layer of MOFs on a separator did enhance the capacity stability. Our results suggest that the chemical stability and the aggregation (packing) morphology of MOF particles play more important roles than the internal cavity size in MOFs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
The Chemistry and Applications of Metal-Organic Frameworks
Furukawa, H., Cordova, K. E., O’Keeffe, M., & Yaghi, O. M. (2013) · Science · doi:10.1126/science.1230444 · Cited by 16,945
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Wang, H., Yang, Y., Liang, Y., Robinson, J. T., Li, Y., Jackson, A., Cui, Y., & Dai, H. (2011) · Nano Letters · doi:10.1021/nl200658a · Cited by 2,119
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
Metal–organic framework-based separator for lithium–sulfur batteries
Bai, S., Liu, X., Zhu, K., Wu, S., & Zhou, H. (2016) · Nature Energy · doi:10.1038/nenergy.2016.94 · Cited by 1,333
Zheng, G., Yang, Y., Cha, J. J., Hong, S. S., & Cui, Y. (2011) · Nano Letters · doi:10.1021/nl2027684 · Cited by 1,295
A Graphene–Pure‐Sulfur Sandwich Structure for Ultrafast, Long‐Life Lithium–Sulfur Batteries
Zhou, G., Pei, S., Li, L., Wang, D., Wang, S., Huang, K., Yin, L., Li, F., & Cheng, H. (2014) · Advanced Materials · doi:10.1002/adma.201302877 · Cited by 997
Self-citationMoS2/Celgard Separator as Efficient Polysulfide Barrier for Long‐Life Lithium–Sulfur Batteries
Ghazi, Z. A., He, X., Khattak, A. M., Khan, N. A., Liang, B., Iqbal, A., Wang, J., Sin, H., Li, L., & Tang, Z. (2017) · Advanced Materials · doi:10.1002/adma.201606817 · Cited by 902
Self-citationZeolite-like metal–organic frameworks (ZMOFs): design, synthesis, and properties
Eddaoudi, M., Sava, D. F., Eubank, J. F., Adil, K., & Guillerm, V. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00230j · Cited by 773
Self-citationYao, H., Yan, K., Li, W., Zheng, G., Kong, D., Seh, Z. W., Narasimhan, V. K., Liang, Z., & Cui, Y. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01377h · Cited by 526
Chung, S., & Manthiram, A. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400845 · Cited by 516
Entrapment of Polysulfides by a Black‐Phosphorus‐Modified Separator for Lithium–Sulfur Batteries
Sun, J., Sun, Y., Pasta, M., Zhou, G., Li, Y., Liu, W., Xiong, F., & Cui, Y. (2016) · Advanced Materials · doi:10.1002/adma.201602172 · Cited by 516
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie · doi:10.1002/ange.201100637 · Cited by 487
Electrochemical behaviors of CuS as a cathode material for lithium secondary batteries
Chung, J.-S., & Sohn, H.-J. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00024-1 · Cited by 375
Chen, S.-R., Zhai, Y.-P., Xu, G.-L., Jiang, Y.-X., Zhao, D.-Y., Li, J.-T., Huang, L., & Sun, S.-G. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.03.005 · Cited by 346
Reduced polysulfide shuttle in lithium–sulfur batteries using Nafion-based separators
Bauer, I., Thieme, S., Brückner, J., Althues, H., & Kaskel, S. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.090 · Cited by 288
Sparingly Solvating Electrolytes for High Energy Density Lithium–Sulfur Batteries
Cheng, L., Curtiss, L. A., Zavadil, K. R., Gewirth, A. A., Shao, Y., & Gallagher, K. G. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00194 · Cited by 246
Chang, C.-H., Chung, S.-H., & Manthiram, A. (2016) · Small · doi:10.1002/smll.201502505 · Cited by 194
Cellulose-Based Porous Membrane for Suppressing Li Dendrite Formation in Lithium–Sulfur Battery
Yu, B.-C., Park, K., Jang, J.-H., & Goodenough, J. B. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00209 · Cited by 192
An Advanced Separator for Li–O2 Batteries: Maximizing the Effect of Redox Mediators
Lee, S. H., Park, J., Lim, H., & Sun, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602417 · Cited by 122
Synergistic protective effect of a BN-carbon separator for highly stable lithium sulfur batteries
Kim, P. J. H., Seo, J., Fu, K. K., Choi, J., Liu, Z., Kwon, J., Hu, L., & Paik, U. (2017) · NPG Asia Materials · doi:10.1038/am.2017.51 · Cited by 107
Multilayer Approach for Advanced Hybrid Lithium Battery
Ming, J., Li, M., Kumar, P., & Li, L. (2016) · ACS Nano · doi:10.1021/acsnano.6b01626 · Cited by 104
Self-citationXu, G., Yan, Q., Wang, S., Kushima, A., Bai, P., Liu, K., Zhang, X., Tang, Z., & Li, J. (2017) · Chemical Science · doi:10.1039/c7sc01961k · Cited by 103
Zheng, J., Guo, G., Li, H., Wang, L., Wang, B., Yu, H., Yan, Y., Yang, D. S., & Dong, A. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00230 · Cited by 101
Cited by
Baumann, A. E., Burns, D. A., Liu, B., & Thoi, V. S. (2019) · Communications Chemistry · doi:10.1038/s42004-019-0184-6 · Cited by 1,088
Synthesis of micro/nanoscaled metal–organic frameworks and their direct electrochemical applications
Xiao, X., Zou, L., Pang, H., & Xu, Q. (2020) · Chemical Society Reviews · doi:10.1039/c7cs00614d · Cited by 882
Metal–organic frameworks as a platform for clean energy applications
Li, X., Yang, X., Xue, H., Pang, H., & Xu, Q. (2020) · EnergyChem · doi:10.1016/j.enchem.2020.100027 · Cited by 706
Emerging Era of Electrolyte Solvation Structure and Interfacial Model in Batteries
Cheng, H., Sun, Q., Li, L., Zou, Y., Wang, Y., Cai, T., Zhao, F., Liu, G., Ma, Z., Wahyudi, W., et al. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.1c02425 · Cited by 640
Self-citationMetal-organic frameworks for direct electrochemical applications
Xu, Y., Li, Q., Xue, H., & Pang, H. (2018) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2018.08.010 · Cited by 557
Metadata
- Authors
- Li, M., Wan, Y., Huang, J.-K., Assen, A. H., Hsiung, C.-E., Jiang, H., Han, Y., Eddaoudi, M., Lai, Z., Ming, J., & Li, L.-J.
- Venue
- ACS Energy Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-09-15
- Volume
- 2
- Issue
- 10
- Pages
- 2362-2367
- ISSN
- 2380-8195 (ISSN-L)
- OpenAlex
- W2756372991
- Cited by
- 282
- References
- 27
- FWCI
- 11.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.