The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Controlling Thin-Film Stress and Wrinkling during Perovskite Film Formation
Abstract
Significant effort has focused on controlling the deposition of perovskite films to enable uniform films, enabling efficiencies to climb dramatically. However, little attention has been paid to the evolution of thin-film stresses during deposition and the consequent effect on film morphology. While a textured surface topology has potential benefits for light scattering, a smooth surface is desirable to enable the pinhole-free deposition of contact layers. We show that the highly textured morphology made by popular antisolvent conversion methods arises because of in-plane compressive stress experienced during the intermediate phase of film formation where the substrate constrains the film from expanding—leading to energy release in the form of wrinkling, resulting in trenches that can be hundreds of nanometers deep with periods of several micrometers. We demonstrate that the extent of wrinkling is correlated with the rate of film conversion and that ultrasmooth films are obtained by slowing the rate of film formation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Cited by
Understanding Degradation Mechanisms and Improving Stability of Perovskite Photovoltaics
Boyd, C. C., Cheacharoen, R., Leijtens, T., & McGehee, M. D. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00336 · Cited by 1,777
Self-citationStrain engineering in perovskite solar cells and its impacts on carrier dynamics
Zhu, C., Niu, X., Fu, Y., Li, N., Hu, C., Chen, Y., He, X., Na, G., Liu, P., Zai, H., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08507-4 · Cited by 1,042
A piperidinium salt stabilizes efficient metal-halide perovskite solar cells
Lin, Y.-H., Sakai, N., Da, P., Wu, J., Sansom, H. C., Ramadan, A. J., Mahesh, S., Liu, J., Oliver, R. D. J., Lim, J., et al. (2020) · Science · doi:10.1126/science.aba1628 · Cited by 666
Synthetic Approaches for Halide Perovskite Thin Films
Dunlap-Shohl, W. A., Zhou, Y., Padture, N. P., & Mitzi, D. B. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00318 · Cited by 631
Interfacial Residual Stress Relaxation in Perovskite Solar Cells with Improved Stability
Wang, H., Zhu, C., Liu, L., Ma, S., Liu, P., Wu, J., Shi, C., Du, Q., Hao, Y., Xiang, S., et al. (2019) · Advanced Materials · doi:10.1002/adma.201904408 · Cited by 499
Metadata
- Authors
- Bush, K. A., Rolston, N., Gold-Parker, A., Manzoor, S., Hausele, J., Yu, Z. J., Raiford, J. A., Cheacharoen, R., Holman, Z. C., Toney, M. F., Dauskardt, R. H., & McGehee, M. D.
- Venue
- ACS Energy Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-05-01
- Volume
- 3
- Issue
- 6
- Pages
- 1225-1232
- ISSN
- 2380-8195 (ISSN-L)
- OpenAlex
- W2799854290
- Cited by
- 225
- References
- 2
- FWCI
- 9.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Controlling Thin-Film Stress and Wrinkling during Perovskite Film Formation. https://app.cochat.ai/papers/10.1021/acsenergylett.8b00544
- The paper
- Bush, K. A., Rolston, N., Gold-Parker, A., Manzoor, S., Hausele, J., Yu, Z. J., Raiford, J. A., Cheacharoen, R., Holman, Z. C., Toney, M. F., Dauskardt, R. H., & McGehee, M. D. (2018). Controlling Thin-Film Stress and Wrinkling during Perovskite Film Formation. ACS Energy Letters. https://doi.org/10.1021/acsenergylett.8b00544
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.