The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Postcombustion CO2 Capture: A Comparative Techno-Economic Assessment of Three Technologies Using a Solvent, an Adsorbent, and a Membrane
Open accessAbstract
High Resolution Image Download MS PowerPoint Slide This work compares three postcombustion CO 2 capture processes based on mature technologies for CO 2 separation, namely, (i) absorption using an aqueous piperazine solution, (ii) adsorption using Zeolite 13X in conventional fixed beds (either vacuum swing adsorption or temperature swing adsorption), and (iii) multistage membrane separation using a polymeric material (with CO 2 /N 2 selectivity of 50 and permeability for CO 2 of 1700 GPU). All three capture plants are assumed to be retrofitted to a generic industrial CO 2 -emitting source with 12% CO 2 v/v (with 95% relative humidity at the inlet temperature and pressure of 30 °C and 1.3 bar, respectively) to deliver CO 2 at 96% purity. In the cases of adsorption and membranes, the flue gas is dried before feeding it to the CO 2 capture unit. In a first step, the capture processes (i.e., components and design parameters) are optimized based on their technical performance, defined through process exergy requirement and plant productivity; exergy–productivity Pareto fronts are computed for varying CO 2 recovery rates. Second, the economic performance of the processes is assessed through a cost analysis. Estimates of CO 2 capture costs are provided for each process as a function of the plant size and CO 2 recovery rate. The comparative assessment shows that, although the adsorption- and membrane-based processes analyzed may become cost competitive at the small scale (i.e., below sizes of 100 tons of flue gas processed per day) and low recovery rates (i.e., below ca. 40%), the absorption-based process considered is the most cost-effective option at most plant sizes and recovery rates.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Carbon capture and storage (CCS): the way forward
Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02342a · Cited by 4,374
Carbon capture and storage update
Boot-Handford, M. E., Abanades, J. C., Anthony, E. J., Blunt, M. J., Brandani, S., Mac Dowell, N., Fernández, J. R., Ferrari, M.-C., Gross, R., Hallett, J. P., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42350f · Cited by 2,386
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
An overview of CO2 capture technologies
MacDowell, N., Florin, N., Buchard, A., Hallett, J., Galindo, A., Jackson, G., Adjiman, C. S., Williams, C. K., Shah, N., & Fennell, P. (2010) · Energy & Environmental Science · doi:10.1039/c004106h · Cited by 1,636
Cited by
Direct air capture: process technology, techno-economic and socio-political challenges
Erans, M., Sanz-Pérez, E. S., Hanak, D. P., Clulow, Z., Reiner, D. M., & Mutch, G. A. (2022) · Energy & Environmental Science · doi:10.1039/d1ee03523a · Cited by 688
Hong, W. Y. (2022) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2022.100044 · Cited by 455
Review on CO2 Capture Using Amine-Functionalized Materials
Hack, J., Maeda, N., & Meier, D. M. (2022) · ACS Omega · doi:10.1021/acsomega.2c03385 · Cited by 366
Metadata
- Authors
- Zanco, S. E., Pérez-Calvo, J.-F., Gasós, A., Cordiano, B., Becattini, V., & Mazzotti, M.
- Venue
- ACS Engineering Au
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-07-15
- Volume
- 1
- Issue
- 1
- Pages
- 50-72
- ISSN
- 2694-2488 (ISSN-L)
- OpenAlex
- W3185945935
- Cited by
- 219
- References
- 4
- FWCI
- 12.04
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.