The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Programmable Liquid Crystal Elastomers Prepared by Thiol–Ene Photopolymerization
Abstract
The spontaneous conversion of a flat film into a 3-D shape requires local programming of the mechanical response. Historically, the ability to locally program the mechanical response of high strain (>30%) liquid crystalline elastomers (LCEs) has been limited to magnetic or mechanical alignment techniques, which limits spatial resolution. Recently, we reported on the preparation of LCEs capable of 55% strain with spatial control of the mechanical response at scales as small as 0.01 mm 2 . Here, we report a distinct formulation strategy to realize programmable stimulus-response in LCEs. Photopolymerization of thiol–ene/acrylate formulations yields materials that exhibit large reversible strain up to 150%. The photopolymerization reaction is extremely rapid, reducing preparation time from days to minutes. The mechanical behavior of these materials can be tuned by varying cross-link density. Spatial and hierarchical programming of the director profile is demonstrated, enabling 3-D shape change, including twisting ribbons and localized Gaussian curvature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Liquid crystalline elastomers as actuators and sensors
Ohm, C., Brehmer, M., & Zentel, R. (2010) · Advanced Materials · doi:10.1002/adma.200904059 · Cited by 1,169
Mather, P. T., Luo, X., & Rousseau, I. A. (2009) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-082908-145419 · Cited by 911
Switchable Micropatterned Surface Topographies Mediated by Reversible Shape Memory
Turner, S. A., Zhou, J., Sheiko, S. S., & Ashby, V. S. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501970d · Cited by 71
Cited by
Synthesis and alignment of liquid crystalline elastomers
Herbert, K. M., Fowler, H. E., McCracken, J. M., Schlafmann, K. R., Koch, J. A., & White, T. J. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00359-z · Cited by 600
Self-citationSulfur and Its Role In Modern Materials Science
Boyd, D. A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201604615 · Cited by 512
Four-dimensional printing of liquid crystal elastomers
Ambulo, C. P., Burroughs, J. J., Boothby, J. M., Kim, H., Shankar, M. R., & Ware, T. H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11851 · Cited by 508
Self-citationLiquid crystal elastomer actuators: Synthesis, alignment, and applications
Kularatne, R. S., Kim, H., Boothby, J. M., & Ware, T. H. (2017) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.24287 · Cited by 396
Self-citationMolecularly-engineered, 4D-printed liquid crystal elastomer actuators
Saed, M. O., Ambulo, C. P., Kim, H., De, R., Raval, V., Searles, K., Siddiqui, D. A., Cue, J. M. O., Stefan, M. C., Shankar, M. R., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806412 · Cited by 383
Self-citation
Metadata
- Authors
- Ware, T. H., Perry, Z. P., Middleton, C. M., Iacono, S. T., & White, T. J.
- Venue
- ACS Macro Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-08-17
- Volume
- 4
- Issue
- 9
- Pages
- 942-946
- ISSN
- 2161-1653 (ISSN-L)
- OpenAlex
- W2502162946
- Cited by
- 158
- References
- 3
- FWCI
- 16.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Programmable Liquid Crystal Elastomers Prepared by Thiol–Ene Photopolymerization. https://app.cochat.ai/papers/10.1021/acsmacrolett.5b00511
- The paper
- Ware, T. H., Perry, Z. P., Middleton, C. M., Iacono, S. T., & White, T. J. (2015). Programmable Liquid Crystal Elastomers Prepared by Thiol–Ene Photopolymerization. ACS Macro Letters. https://doi.org/10.1021/acsmacrolett.5b00511
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.