Aerosol Filtration Efficiency of Common Fabrics Used in Respiratory Cloth Masks
The DOI matches its Crossref record; 46 of the 47 references it cites were found in a registry or an index.
Abstract
The emergence of a pandemic affecting the respiratory system can result in a significant demand for face masks. This includes the use of cloth masks by large sections of the public, as can be seen during the current global spread of COVID-19. However, there is limited knowledge available on the performance of various commonly available fabrics used in cloth masks. Importantly, there is a need to evaluate filtration efficiencies as a function of aerosol particulate sizes in the 10 nm to 10 μm range, which is particularly relevant for respiratory virus transmission. We have carried out these studies for several common fabrics including cotton, silk, chiffon, flannel, various synthetics, and their combinations. Although the filtration efficiencies for various fabrics when a single layer was used ranged from 5 to 80% and 5 to 95% for particle sizes of <300 nm and >300 nm, respectively, the efficiencies improved when multiple layers were used and when using a specific combination of different fabrics. Filtration efficiencies of the hybrids (such as cotton–silk, cotton–chiffon, cotton–flannel) was >80% (for particles <300 nm) and >90% (for particles >300 nm). We speculate that the enhanced performance of the hybrids is likely due to the combined effect of mechanical and electrostatic-based filtration. Cotton, the most widely used material for cloth masks performs better at higher weave densities (i.e., thread count) and can make a significant difference in filtration efficiencies. Our studies also imply that gaps (as caused by an improper fit of the mask) can result in over a 60% decrease in the filtration efficiency, implying the need for future cloth mask design studies to take into account issues of “fit” and leakage, while allowing the exhaled air to vent efficiently. Overall, we find that combinations of various commonly available fabrics used in cloth masks can potentially provide significant protection against the transmission of aerosol particles.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Recent works 7, 23, 26-29 focused nearly exclusively on the performance of the respirators, i.e., their filtration performance.”
From Assessment of N95 and K95 respirator decontamination: fiber integrity, filtration efficiency, and dipole charge density (2020) · cites this paper as [7]
In the citing paper
“It is caused by severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2), and the main transmission routes of this virus are aerosols and droplets [1].”
From Bacteria Filtration Efficiency for Different Types of Protective Face Masks (2023) · cites this paper as [1]
In the citing paper
“the quality of 'fit' should be taken into account to minimize the leakage of air between the mask and the contours of the face [1].”
From Bacteria Filtration Efficiency for Different Types of Protective Face Masks (2023) · cites this paper as [1]
Citations
Cites
Aerosol and surface stability of SARS-CoV-2 as compared with SARS-CoV-1
van Doremalen, N., Bushmaker, T., Morris, D. H., Holbrook, M. G., Gamble, A., Williamson, B. N., Tamin, A., Harcourt, J. L., Thornburg, N. J., Gerber, S. I., et al. (2020) · New England Journal of Medicine · doi:10.1056/nejmc2004973 · Cited by 9,951
Aerosol Technology Properties, Behavior, and Measurement of Airborne Particles
LAUCKS, M. L. (2000) · Journal of Aerosol Science · doi:10.1016/s0021-8502(99)00571-6 · Cited by 3,367 · cited 1×
“23, 24 For aerosols larger than ∼1 μm to 10 μm, the first two mechanisms play a role, where ballistic energy or gravity forces are the primary influence on the large exhaled droplets.”
BackgroundRespiratory virus shedding in exhaled breath and efficacy of face masks
Leung, N. H. L., Chu, D. K. W., Shiu, E. Y. C., Chan, K.-H., McDevitt, J. J., Hau, B. J. P., Yen, H.-L., Li, Y., Ip, D. K. M., Peiris, J. S. M., et al. (2020) · Nature Medicine · doi:10.1038/s41591-020-0843-2 · Cited by 2,270
Airborne transmission of SARS-CoV-2: The world should face the reality
Morawska, L., & Cao, J. (2020) · Environment International · doi:10.1016/j.envint.2020.105730 · Cited by 1,728
(2020) · doi:10.1101/2020.03.23.20039446 · Cited by 931
Aerosol and surface contamination of SARS-CoV-2 observed in quarantine and isolation care
Santarpia, J. L., Rivera, D. N., Herrera, V. L., Morwitzer, M. J., Creager, H. M., Santarpia, G. W., Crown, K. K., Brett-Major, D. M., Schnaubelt, E. R., Broadhurst, M. J., et al. (2020) · Scientific Reports · doi:10.1038/s41598-020-69286-3 · Cited by 930
Milton, D. K., Fabian, M. P., Cowling, B. J., Grantham, M. L., & McDevitt, J. J. (2013) · PLoS Pathogens · doi:10.1371/journal.ppat.1003205 · Cited by 669
Droplet fate in indoor environments, or can we prevent the spread of infection?
Morawska, L. (2006) · Indoor Air · doi:10.1111/j.1600-0668.2006.00432.x · Cited by 635
Transmission routes of respiratory viruses among humans
Kutter, J. S., Spronken, M. I., Fraaij, P. L., Fouchier, R. A., & Herfst, S. (2018) · Current Opinion in Virology · doi:10.1016/j.coviro.2018.01.001 · Cited by 611
Toward Nanotechnology-Enabled Approaches against the COVID-19 Pandemic
Weiss, C., Carriere, M., Fusco, L., Capua, I., Regla-Nava, J. A., Pasquali, M., Scott, J. A., Vitale, F., Unal, M. A., Mattevi, C., et al. (2020) · ACS Nano · doi:10.1021/acsnano.0c03697 · Cited by 601
Research works printed but not linked: 5
- National Academies of Sciences, 2020, Medicine, 8, 10.17226/25784 · DOI
- World Health Organization, 2009, Annex C - Respiratory droplets, 77
- Hinds, 1999, 9 - Filtration, 182
- Vincent, 2007, 21 - Aerosol Sample Applications and Field Studies, 528
- National Academies of Sciences, 2019, Medicine, 226
Cited by
Items 901–933 of 933
Impact of nano biomaterials as PPE coatings to prevent COVID-19: A review article
Verma, G., Awasthi, S., Sharma, K., & Gupta, A. (2025) · AIP conference proceedings · doi:10.1063/5.0240619
Testing filtration capabilities of household fabrics for protection against airborne contaminants
Shah, E., & Shah, B. (2025) · Journal of Emerging Investigators · doi:10.59720/24-122
Identifying the effectiveness of face mask in a large population with a network-based fluid model
Anand, A., & Shoele, K. (2025) · PLoS ONE · doi:10.1371/journal.pone.0324229 · Cited by 1
“It has been found that masks made from high filtration efficiency (FE) materials can filter a wide range of particles [14].”
Wierzowiecka, J., & Dąbrowska, V. (2025) · Krakow Review of Economics and Management/Zeszyty Naukowe Uniwersytetu Ekonomicznego w Krakowie · doi:10.15678/krem.18689
5 things you should do right now to fight the rising number of COVID-19 cases
Ernst, K. C., & Columbo, P. (2020) · doi:10.64628/aai.mhykt564h
Prepare for the worst: 10 steps to get ready for wildfire smoke
Henderson, S. B., & Flannigan, M. (2021) · doi:10.64628/aam.u5ns3pnum
10 tips for coping with wildfire smoke, from a public health expert
Henderson, S. B. (2020) · doi:10.64628/aam.4mcjm4yvr
Chandel, R., Chandel, L. R., Ganju, S., & Ganju, S. A. (2025) · Journal of Indira Gandhi Institute Of Medical Sciences · doi:10.4103/jigims.jigims_25_25
Adapting to the New Norms: A Year of COVID-19 Preventive Practices in Malaysia
Islahudin, F. H., Ariffin, N. M., & Aziz, S. A. A. (2021) · International Journal of Social and Psychological Aspects of Healthcare · doi:10.51847/i6n6p36ejt
Duong, A. H., Rafael, S. M., Rosa, M. D., & Antriyandarti, E. (2025) · Journal of Infection Prevention · doi:10.1177/17571774251394889
“Advanced materials releasing heat/moisture while protecting offer solutions (Konda et al., 2020).”
Chapman, L. A. C., Kushel, M., Cox, S. N., Scarborough, A. P., Cawley, C. L., Nguyen, T. Q., Rodríguez-Barraquer, I., Greenhouse, B., Imbert, E., & Lo, N. C. (2021) · Figshare · doi:10.6084/m9.figshare.14559071
Wimba, P., Bazeboso, J.-A., Katchunga, P. B., Tshilolo, L. M., Longo-Mbenza, B., Rabilloud, M., Vanhems, P., Iwaz, J., Étard, J.-F., & Écochard, R. (2020) · Figshare · doi:10.6084/m9.figshare.12870266
CHALLENGES IN DESIGNING AND MANUFACTURING OF RESPIRATORY PROTECTIVE DEVICES
Radchuk, D. (2025) · Municipal economy of cities · doi:10.33042/3083-6727-2025-6-194-360-369
A few good masks: Mask manufacturing and supply networks in Rwanda during the COVID-19 pandemic
Byrne, K., Kondylis, F., Loeser, J., & Mukama, D. (2026) · Journal of Development Economics · doi:10.1016/j.jdeveco.2025.103715
A system for invitro inhaled/exhaled aerosol testing of personal protective equipment
Baldelli, A., Poznikoff, A. K., & Purdy, R. (2026) · Scientific Reports · doi:10.1038/s41598-026-35248-4
Kashif, M., Qasim, M., & Liu, Y. (2026) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2026.122390
Perceptions of mask fit and discomfort among young Japanese post-lifting of mask-wearing mandates
Morishima, M., Mori, Y., Yamada, Y., & Yumoto, L. (2026) · International Journal of Clothing Science and Technology · doi:10.1108/ijcst-11-2024-0229
Evaluation of bamboo pulp-based paper for air filtration
Choi, S. R., Kim, S.-G., & Lee, J. M. (2026) · Nordic Pulp & Paper Research Journal · doi:10.1515/npprj-2026-0010
Talukder, A., Rai, S., Mohakar, V. N., Ponnusamy, P. G., & Sharma, S. (2026) · De Gruyter eBooks · doi:10.1515/9783111243757-007
Deformation-aware filtration modeling of stretchable knitted facepieces
Lee, K., Choi, Y., & Kim, J. (2026) · Separation and Purification Technology · doi:10.1016/j.seppur.2026.138822
Liu, L., Zheng, L., & Zhang, Y. (2026) · Journal of Aerosol Science · doi:10.1016/j.jaerosci.2026.106857
Paydar, A., Maharjan, S., Wang, A. J., Mellon, E., Gates, J., Hlavinka, B., Taylor, A. J., Curran, M., Gutierrez, J., Pham, L., et al. (2026) · ACS ES&T Engineering · doi:10.1021/acsestengg.6c00372
Modular Multi-Scale Digital Twin Framework for Sustainable Design of Hybrid Air-Purifying Facepiece
Lee, K., Choi, Y., & Kim, J. (2026) · ACS Applied Engineering Materials · doi:10.1021/acsaenm.6c00616
Aerosol emission rates from breathing, speaking, and speaking with a surgical mask
Firle, C., Stier, O., & Steinmetz, A. (2026) · Frontiers in Public Health · doi:10.3389/fpubh.2026.1833687
Xu, J., Zou, X., Cao, N., Yao, Y., Jia, Y., Zheng, N., Chen, Z., Yang, Y., Lu, Z., Chen, X., et al. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.179784
Eficiência de filtragem de partículas em materiais têxteis utilizados em máscaras faciais caseiras
de Sousa, R. P., Bicudo, T. C., & Paes, D. M. B. (2026) · Research Society and Development · doi:10.33448/rsd-v15i8.50534
The filtration performance of fabrics against particles of viral size: a systematic review
Ha, N. X., Nguyen, A. P. N., Trang, H. N. M., Aziz, J. M. A., Dhouibi, N., Le, B.-T. D., Altom, A., Amin, M. A., Anh, P. D. T., Said, H., et al. (2026) · BMC Infectious Diseases · doi:10.1186/s12879-026-14275-6
“Some studies on cloth face masks during the 2009 Influenza pandemic were reported, but the efficiency of different fabrics as a function of particle size ranging from nanoscale to micron lacked (especially aerosols with sizes of 10 nm–5 μm) [18–23].”
InfluentialInfluence of geometric, structural, and mass characteristics on respirator facial fit performance
Ivanova, M. (2026) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/1661/1/012030
da Mata, G. C., Chagas, P. A. M., de Araújo, D. T., da Silva, E. N., Lima, F. D. A., de Souza, C. W. O., Guerra, V. G., OLIVEIRA, W. P. D., & Aguiar, M. L. (2026) · ACS Applied Engineering Materials · doi:10.1021/acsaenm.6c00834
Rattanachan, W., & Intra, P. (2026) · Journal of Electrostatics · doi:10.1016/j.elstat.2026.104404
Kim, K., & Nam, C. L. (2026) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-026-18756-x
Silver nanodot embedded waste PET nanofibres for efficient multifunctional air filter
Thakur, B., Biswas, T., Kumar, A., Venkatesan, H., & Sinha‐Ray, S. (2026) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2026.144053
Metadata
- Authors
- Konda, A., Prakash, A., Moss, G. A., Schmoldt, M., Grant, G. D., & Guha, S.
- Affiliations
- Argonne National Laboratory (US)
- University of Chicago (US)
- Corresponding author
- Guha, Supratik
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-04-24
- Volume
- 14
- Issue
- 5
- Pages
- 6339-6347
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W3018363786
- Cited by
- 934
- References
- 47
- Citations by year
- 2026: 27 · 2025: 45 · 2024: 72 · 2023: 101 · 2022: 179 · 2021: 305 · 2020: 205
- FWCI
- 111.33
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Nano (publishedVersion)
- PubMed (publishedVersion)
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- Funders
- Department of Defense Vannevar Bush Fellowship (N00014-18-1-2869)
- Topics
- Health Sciences › Medicine › Pulmonary and Respiratory Medicine › Infection Control and Ventilation
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Aerosol Filtration and Electrostatic Precipitation
- Physical Sciences › Materials Science › Polymers and Plastics › Textile materials and evaluations
- Keywords
- cloth masks, aerosol filtration efficiency, cotton, silk, chiffon, flannel, synthetic textiles, particle size dependence, weave density, respiratory virus transmission, COVID-19 pandemic
- MeSH terms
- Aerosols, Filtration, Masks, Respiratory Protective Devices, Textiles, Static Electricity, Absorption, Physicochemical
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.