The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Modified MAX Phase Synthesis for Environmentally Stable and Highly Conductive Ti 3 C 2 MXene
Open accessAbstract
One of the primary factors limiting further research and commercial use of the two-dimensional (2D) titanium carbide MXene Ti 3 C 2, as well as MXenes in general, is the rate at which freshly made samples oxidize and degrade when stored as aqueous suspensions. Here, we show that including excess aluminum during synthesis of the Ti 3 AlC 2 MAX phase precursor leads to Ti 3 AlC 2 grains with improved crystallinity and carbon stoichiometry (termed Al–Ti 3 AlC 2 ). MXene nanosheets (Al–Ti 3 C 2 ) produced from this precursor are of higher quality, as evidenced by their increased resistance to oxidation and an increase in their electronic conductivity up to 20 000 S/cm. Aqueous suspensions of stoichiometric single- to few-layer Al–Ti 3 C 2 flakes produced from the modified Al–Ti 3 AlC 2 have a shelf life of over ten months, compared to 1 to 2 weeks for previously published Ti 3 C 2, even when stored in ambient conditions. Freestanding films made from Al–Ti 3 C 2 suspensions stored for ten months show minimal decreases in electrical conductivity and negligible oxidation. Furthermore, oxidation of the improved Al–Ti 3 C 2 in air initiates at temperatures that are 100–150 °C higher than that of conventional Ti 3 C 2 . The observed improvements in both the shelf life and properties of Al–Ti 3 C 2 will facilitate the widespread use of this material.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Commentary: The Materials Project: A materials genome approach to accelerating materials innovation
Jain, A., Ong, S. P., Hautier, G., Chen, W., Richards, W. D., Dacek, S., Cholia, S., Gunter, D., Skinner, D., Ceder, G., et al. (2013) · APL Materials · doi:10.1063/1.4812323 · Cited by 13,094
2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
Self-citationGuidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2Tx MXene)
Alhabeb, M., Maleski, K., Anasori, B., Lelyukh, P., Clark, L., Sin, S., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02847 · Cited by 5,045
Self-citationLiquid Exfoliation of Layered Materials
Nicolosi, V., Chhowalla, M., Kanatzidis, M. G., Strano, M. S., & Coleman, J. N. (2013) · Science · doi:10.1126/science.1226419 · Cited by 3,796
Gogotsi, Y., & Anasori, B. (2019) · ACS Nano · doi:10.1021/acsnano.9b06394 · Cited by 2,541
Self-citationLipatov, A., Alhabeb, M., Lukatskaya, M. R., Boson, A., Gogotsi, Y., & Sinitskii, A. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600255 · Cited by 1,751
Self-citationOxidation Stability of Colloidal Two-Dimensional Titanium Carbides (MXenes)
Zhang, C. J., Pinilla, S., McEvoy, N., Cullen, C. P., Anasori, B., Long, E., Park, S.-H., Seral-Ascaso, A., Shmeliov, A., Krishnan, D., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00745 · Cited by 1,725
Self-citationLi, Y., Shao, H., Lin, Z., Lu, J., Liu, L., Duployer, B., Persson, P. O. Å., Eklund, P., Hultman, L., Li, M., et al. (2020) · Nature Materials · doi:10.1038/s41563-020-0657-0 · Cited by 1,657
Raman Spectroscopy Analysis of the Structure and Surface Chemistry of Ti3C2T x MXene
Sarycheva, A., & Gogotsi, Y. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c00359 · Cited by 1,467
Self-citationZhang, C. (., Anasori, B., Seral‐Ascaso, A., Park, S., McEvoy, N., Shmeliov, A., Duesberg, G. S., Coleman, J. N., Gogotsi, Y., & Nicolosi, V. (2017) · Advanced Materials · doi:10.1002/adma.201702678 · Cited by 1,159
Self-citation
Cited by
The world of two-dimensional carbides and nitrides (MXenes)
VahidMohammadi, A., Rosen, J., & Gogotsi, Y. (2021) · Science · doi:10.1126/science.abf1581 · Cited by 3,191
Self-citationPhotothermal Nanomaterials: A Powerful Light-to-Heat Converter
Cui, X., Ruan, Q., Zhuo, X., Xia, X., Hu, J., Fu, R., Li, Y., Wang, J., & Xu, H. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00159 · Cited by 1,944
MXene chemistry, electrochemistry and energy storage applications
Li, X., Huang, Z., Shuck, C. E., Liang, G., Gogotsi, Y., & Zhi, C. (2022) · Nature Reviews Chemistry · doi:10.1038/s41570-022-00384-8 · Cited by 1,495
Self-citationTen Years of Progress in the Synthesis and Development of MXenes
Naguib, M., Barsoum, M. W., & Gogotsi, Y. (2021) · Advanced Materials · doi:10.1002/adma.202103393 · Cited by 1,257
Self-citationFundamentals of MXene synthesis
Lim, K. R. G., Shekhirev, M., Wyatt, B. C., Anasori, B., Gogotsi, Y., & Seh, Z. W. (2022) · Nature Synthesis · doi:10.1038/s44160-022-00104-6 · Cited by 1,236
Self-citationAdvances in the Synthesis of 2D MXenes
Wei, Y., Zhang, P., Soomro, R. A., Zhu, Q., & Xu, B. (2021) · Advanced Materials · doi:10.1002/adma.202103148 · Cited by 1,216
Recent Advances in Oxidation Stable Chemistry of 2D MXenes
Cao, F., Zhang, Y., Wang, H., Khan, K., Tareen, A. K., Qian, W., Zhang, H., & Ågren, H. (2022) · Advanced Materials · doi:10.1002/adma.202107554 · Cited by 648
2D MXenes: Tunable Mechanical and Tribological Properties
Wyatt, B. C., Rosenkranz, A., & Anasori, B. (2021) · Advanced Materials · doi:10.1002/adma.202007973 · Cited by 646
Improving oxidation stability of 2D MXenes: synthesis, storage media, and conditions
Iqbal, A., Hong, J., Ko, T. Y., & Koo, C. M. (2021) · Nano Convergence · doi:10.1186/s40580-021-00259-6 · Cited by 534
Panda, S., Deshmukh, K., Khadheer Pasha, S. K., Theerthagiri, J., Manickam, S., & Choi, M. Y. (2022) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2022.214518 · Cited by 465
High-Entropy 2D Carbide MXenes: TiVNbMoC 3 and TiVCrMoC 3
Nemani, S. K., Zhang, B., Wyatt, B. C., Hood, Z. D., Manna, S., Khaledialidusti, R., Hong, W., Sternberg, M. G., Sankaranarayanan, S. K. R. S., & Anasori, B. (2021) · ACS Nano · doi:10.1021/acsnano.1c02775 · Cited by 423
Selectivity in Chemiresistive Gas Sensors: Strategies and Challenges
Bulemo, P. M., Kim, D.-H., Shin, H., Cho, H.-J., Koo, W.-T., Choi, S.-J., Park, C., Ahn, J., Güntner, A. T., Penner, R. M., et al. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00592 · Cited by 418
Fourier-Transform Infrared Spectral Library of MXenes
Parker, T., Zhang, D., Bugallo, D., Shevchuk, K., Downes, M., Valurouthu, G., Inman, A., Chacon, B., Zhang, T., Shuck, C. E., et al. (2024) · Chemistry of Materials · doi:10.1021/acs.chemmater.4c01536 · Cited by 354
Self-citationRecent Advances in 2D Material Theory, Synthesis, Properties, and Applications
Lin, Y.-C., Torsi, R., Younas, R., Hinkle, C. L., Rigosi, A. F., Hill, H. M., Zhang, K., Huang, S., Shuck, C. E., Chen, C., et al. (2023) · ACS Nano · doi:10.1021/acsnano.2c12759 · Cited by 342
Self-citationDesign and advanced manufacturing of electromagnetic interference shielding materials
Liu, J., Yu, M.-Y., Yu, Z.-Z., & Nicolosi, V. (2023) · Materials Today · doi:10.1016/j.mattod.2023.03.022 · Cited by 332
Perspectives of 2D MXene Tribology
Rosenkranz, A., Righi, M. C., Sumant, A. V., Anasori, B., & Mochalin, V. N. (2023) · Advanced Materials · doi:10.1002/adma.202207757 · Cited by 331
High‐Entropy Atomic Layers of Transition‐Metal Carbides (MXenes)
Du, Z., Wu, C., Chen, Y., Cao, Z., Hu, R., Zhang, Y., Gu, J., Cui, Y., Chen, H., Shi, Y., et al. (2021) · Advanced Materials · doi:10.1002/adma.202101473 · Cited by 322
Wang, Y., Guo, T., Tian, Z., Bibi, K., Zhang, Y., & Alshareef, H. N. (2022) · Advanced Materials · doi:10.1002/adma.202108560 · Cited by 315
Monitoring Ti3C2Tx MXene Degradation Pathways Using Raman Spectroscopy
Adomaviciute-Grabusove, S., Popov, A., Ramanavicius, S., Sablinskas, V., Shevchuk, K., Gogotsi, O., Baginskiy, I., Gogotsi, Y., & Ramanavicius, A. (2024) · ACS Nano · doi:10.1021/acsnano.4c02150 · Cited by 283
Self-citationBalancing MXene Surface Termination and Interlayer Spacing Enables Superior Microwave Absorption
Du, Y., Yan, Z., You, W., Men, Q., Chen, G., Lv, X., Wu, Y., Luo, K., Zhao, B., Zhang, J., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202301449 · Cited by 282
Water-induced strong isotropic MXene-bridged graphene sheets for electrochemical energy storage
Yang, J., Li, M., Fang, S., Wang, Y., He, H., Wang, C., Zhang, Z., Yuan, B., Jiang, L., Baughman, R. H., et al. (2024) · Science · doi:10.1126/science.adj3549 · Cited by 271
Metadata
- Authors
- Mathis, T. S., Maleski, K., Goad, A., Sarycheva, A., Anayee, M., Foucher, A. C., Hantanasirisakul, K., Shuck, C. E., Stach, E. A., & Gogotsi, Y.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-04-13
- Volume
- 15
- Issue
- 4
- Pages
- 6420-6429
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W3156227411
- Cited by
- 1,001
- References
- 26
- FWCI
- 43.46
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.