The DOI matches its Crossref record.
Porous Two-dimensional Iron-Cyano Nanosheets for High-rate Electrochemical Nitrate Reduction
Abstract
Ammonia (NH 3 ) is an essential ingredient in agriculture and a promising source of clean energy as a hydrogen carrier. The current major method for ammonia production, however, is the Haber–Bosch process that leads to massive energy consumption and severe environmental issues. Compared with nitrogen (N 2 ) reduction, electrochemical nitrate reduction reaction (NO 3 RR), with a higher NH 3 yield rate and Faradaic efficiency, holds promise for efficient NH 3 production under ambient conditions. To achieve efficient NO 3 RR, electrocatalysts should exhibit high selectivity and Faradaic efficiency with a high NH 3 yield rate. In this work, we developed two-dimensional (2D) iron-based cyano-coordination polymer nanosheets (Fe-cyano NSs) following in situ electrochemical treatment for high-rate NO 3 RR. Owing to the strong adsorption of nitrate on Fe 0 active sites generated via topotactic conversion and in situ electroreduction, 2D Fe-cyano electrocatalyst exhibits high catalytic activity with a yield rate of 42.1 mg h –1 mg cat –1 and a Faradaic efficiency of over 90% toward NH 3 production at −0.5 V ( vs reversible hydrogen electrode, RHE). Further electrochemical characterizations revealed that superhydrophilic surface and enhanced electrochemical surface area of the 2D porous nanostructures also contributed to the high-rate NO 3 RR activity. An electrolyzer toward NO 3 RR and oxygen evolution reaction (OER) in a two-electrode configuration is constructed based on 2D Fe-cyano, achieving an energy efficiency of 26.2%. This work provides an alternative methodology toward topotactic conversion of transition metal nanosheets for NO 3 RR and reveals the often-overlooked contribution of hydrophilicity of the catalysts for high-rate electrocatalysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Electrochemical Nitrate Reduction: Ammonia Synthesis and the Beyond
Xiong, Y., Wang, Y., Zhou, J., Liu, F., Hao, F., & Fan, Z. (2024) · Advanced Materials · doi:10.1002/adma.202304021 · Cited by 701
Alloying of Cu with Ru Enabling the Relay Catalysis for Reduction of Nitrate to Ammonia
Gao, W., Xie, K., Xie, J., Wang, X., Zhang, H., Chen, S., Wang, H., Li, Z., & Li, C. (2023) · Advanced Materials · doi:10.1002/adma.202202952 · Cited by 532
Recent advances in nanostructured heterogeneous catalysts for N-cycle electrocatalysis
Liang, J., Liu, Q., Alshehri, A. A., & Sun, X. (2022) · Nano Research Energy · doi:10.26599/nre.2022.9120010 · Cited by 415
Li, X., Shen, P., Li, X., Ma, D., & Chu, K. (2023) · ACS Nano · doi:10.1021/acsnano.2c07911 · Cited by 369
Single‐Atom Bi Alloyed Pd Metallene for Nitrate Electroreduction to Ammonia
Chen, K., Ma, Z., Li, X., Kang, J., Ma, D., & Chu, K. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202209890 · Cited by 351
Defect Engineering in Nanocatalysts: From Design and Synthesis to Applications
Muhammad, P., Zada, A., Rashid, J., Hanif, S., Gao, Y., Li, C., Li, Y., Fan, K., & Wang, Y. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202314686 · Cited by 350
Recent Advances in Electrocatalysts for Efficient Nitrate Reduction to Ammonia
Liu, D., Qiao, L., Peng, S., Bai, H., Liu, C., Ip, W. F., Lo, K. H., Liu, H., Ng, K. W., Wang, S., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202303480 · Cited by 336
Chen, W., Yang, X., Chen, Z., Ou, Z., Hu, J., Xu, Y., Li, Y., Ren, X., Ye, S., Qiu, J., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202300512 · Cited by 332
Xue, Y., Yu, Q., Ma, Q., Chen, Y., Zhang, C., Teng, W., Fan, J., & Zhang, W.-X. (2022) · Environmental Science & Technology · doi:10.1021/acs.est.2c04456 · Cited by 268
Xie, M., Zhang, B., Jin, Z., Li, P., & Yu, G. (2022) · ACS Nano · doi:10.1021/acsnano.2c05190 · Cited by 167
Self-citation
Metadata
- Authors
- Fang, Z., Jin, Z., Tang, S., Li, P., Wu, P., & Yu, G.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-12-17
- Volume
- 16
- Issue
- 1
- Pages
- 1072-1081
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W4200246633
- Cited by
- 211
- References
- 0
- FWCI
- 6.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.