MXene-Reinforced Liquid Metal/Polymer Fibers via Interface Engineering for Wearable Multifunctional Textiles
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Stretchable conductive fibers are an important component of wearable electronic textiles, but often suffer from a decrease in conductivity upon stretching. The use of liquid metal (LM) droplets as conductive fillers in elastic fibers is a promising solution. However, there is an urgent need to develop effective strategies to achieve high adhesion of LM droplets to substrates and establish efficient electron transport paths between droplets. Here, we use large-sized MXene two-dimensional conductive materials to modify magnetic LM droplets and prepare MXene/magnetic LM/poly(styrene-butadiene-styrene) composite fibers (MLMS fibers). The MXene sheets decorated on the surface of magnetic LM droplets not only enhance the droplet adhesion to substrate but also bridge adjacent droplets to establish efficient conductive paths. MLMS fibers show several-fold improvements in tensile strength and elongation and a 30-fold increase in conductivity compared with pure LM-filled fibers. These conductive fibers can be easily woven into multifunctional textiles, which exhibit strong electromagnetic interference shielding and stable Joule heating performances even under large tensile deformation. In addition, other advantages of MLMS textiles, such as high gas/liquid permeability, strong chemical resistance (acid and alkaline conditions), high/low-temperature tolerance (-40-150 °C) and water washability, make them particularly suitable for wearable applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yang, J. C., Mun, J., Kwon, S. Y., Park, S., Bao, Z., & Park, S. (2019) · Advanced Materials · doi:10.1002/adma.201904765 · Cited by 1,641
Li, Y., Meng, F., Mei, Y., Wang, H., Guo, Y., Wang, Y., Peng, F., Huang, F., & Zhou, Z. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123512 · Cited by 340
Cited by
Zhang, W., Wang, P.-L., Huang, L.-Z., Guo, W.-Y., Zhao, J., & Ma, M.-G. (2023) · Nano Energy · doi:10.1016/j.nanoen.2023.108875 · Cited by 176
MXene-based fibers: Preparation, applications, and prospects
Zhou, Y., Zhang, Y., Ruan, K., Guo, H., He, M., Qiu, H., & Gu, J. (2024) · Science Bulletin · doi:10.1016/j.scib.2024.07.009 · Cited by 165
Sun, Y., Su, Y., Chai, Z., Jiang, L., & Heng, L. (2024) · Nature Communications · doi:10.1038/s41467-024-51732-9 · Cited by 162
“…EM fi eld, due to the discrepancy in the moving speed and polarization reaction rate of charge carriers in different dielectric materials, the accumulation of free charges occurs at the interfaces between MXene/AP matrices, LM/AP matrices, and MXene/LM, causing interfacial polarizaition 24,60 .”
Metadata
- Authors
- Yi, P., Zou, H., Yu, Y., Li, X., Li, Z., Deng, G., Chen, C., Fang, M., He, J., Sun, X., Liu, X., Shui, J., & Yu, R.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2022-09-12
- Volume
- 16
- Issue
- 9
- Pages
- 14490-14502
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W4295602442
- Cited by
- 223
- References
- 2
- FWCI
- 12.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.