The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Synthesis of Centimeter-Scale Monolayer Tungsten Disulfide Film on Gold Foils
Abstract
We report the synthesis of centimeter-scale monolayer WS2 on gold foil by chemical vapor deposition. The limited tungsten and sulfur solubility in gold foil allows monolayer WS2 film growth on gold surface. To ensure the coverage uniformity of monolayer WS2 film, the tungsten source-coated substrate was placed in parallel with Au foil under hydrogen sulfide atmosphere. The high growth temperature near 935 °C helps to increase a domain size up to 420 μm. Gold foil is reused for the repeatable growth after bubbling transfer. The WS2-based field effect transistor reveals an electron mobility of 20 cm(2) V(-1) s(-1) with high on-off ratio of ∼10(8) at room temperature, which is the highest reported value from previous reports of CVD-grown WS2 samples. The on-off ratio of integrated multiple FETs on the large area WS2 film on SiO2 (300 nm)/Si substrate shows within the same order, implying reasonable uniformity of WS2 FET device characteristics over a large area of 3 × 1.5 cm(2).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The chemistry of two-dimensional layered transition metal dichalcogenide nanosheets
Chhowalla, M., Shin, H. S., Eda, G., Li, L.-J., Loh, K. P., & Zhang, H. (2013) · Nature Chemistry · doi:10.1038/nchem.1589 · Cited by 10,034
Enhanced catalytic activity in strained chemically exfoliated WS2 nanosheets for hydrogen evolution
Voiry, D., Yamaguchi, H., Li, J., Silva, R., Alves, D. C. B., Fujita, T., Chen, M., Asefa, T., Shenoy, V. B., Eda, G., et al. (2013) · Nature Materials · doi:10.1038/nmat3700 · Cited by 2,641
Shi, J., Ma, D., Han, G.-F., Zhang, Y., Ji, Q., Gao, T., Sun, J., Song, X., Li, C., Zhang, Y., et al. (2014) · ACS Nano · doi:10.1021/nn503211t · Cited by 459
Self-citation
Cited by
van der Waals Layered Materials: Opportunities and Challenges
Duong, D. L., Yun, S. J., & Lee, Y. H. (2017) · ACS Nano · doi:10.1021/acsnano.7b07436 · Cited by 626
Self-citationBenchmarking monolayer MoS2 and WS2 field-effect transistors
Sebastian, A., Pendurthi, R., Choudhury, T. H., Redwing, J. M., & Das, S. (2021) · Nature Communications · doi:10.1038/s41467-020-20732-w · Cited by 589
Synthesis of large-area multilayer hexagonal boron nitride for high material performance
Kim, S. M., Hsu, A., Park, M. H., Chae, S. H., Yun, S. J., Lee, J. S., Cho, D.-H., Fang, W., Lee, C., Palacios, T., et al. (2015) · Nature Communications · doi:10.1038/ncomms9662 · Cited by 563
Self-citationLi, S.-L., Tsukagoshi, K., Orgiu, E., & Samorì, P. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00517e · Cited by 549
Applications of Phosphorene and Black Phosphorus in Energy Conversion and Storage Devices
Pang, J., Bachmatiuk, A., Yin, Y., Trzebicka, B., Zhao, L., Fu, L., Mendes, R. G., Gemming, T., Liu, Z., & Rummeli, M. H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702093 · Cited by 518
Metadata
- Authors
- Yun, S. J., Chae, S. H., Kim, H., Park, J. C., Park, J.-H., Han, G. H., Lee, J. S., Kim, S. M., Oh, H. M., Seok, J., Jeong, M. S., Kim, K. K., & Lee, Y. H.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-04-20
- Volume
- 9
- Issue
- 5
- Pages
- 5510-5519
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2315572676
- Cited by
- 203
- References
- 3
- FWCI
- 9.86
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.