The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Formation and Inhibition of Metallic Lithium Microstructures in Lithium Batteries Driven by Chemical Crossover
Open accessAbstract
The formation of metallic lithium microstructures in the form of dendrites or mosses at the surface of anode electrodes ( e . g ., lithium metal, graphite, and silicon) leads to rapid capacity fade and poses grave safety risks in rechargeable lithium batteries. We present here a direct, relative quantitative analysis of lithium deposition on graphite anodes in pouch cells under normal operating conditions, paired with a model cathode material, the layered nickel-rich oxide LiNi 0.61 Co 0.12 Mn 0.27 O 2, over the course of 3000 charge–discharge cycles. Secondary-ion mass spectrometry chemically dissects the solid–electrolyte interphase (SEI) on extensively cycled graphite with virtually atomic depth resolution and reveals substantial growth of Li-metal deposits. With the absence of apparent kinetic ( e . g ., fast charging) or stoichiometric restraints ( e . g ., overcharge) during cycling, we show lithium deposition on graphite is triggered by certain transition-metal ions (manganese in particular) dissolved from the cathode in a disrupted SEI. This insidious effect is found to initiate at a very early stage of cell operation (<200 cycles) and can be effectively inhibited by substituting a small amount of aluminum (∼1 mol %) in the cathode, resulting in much reduced transition-metal dissolution and drastically improved cyclability. Our results may also be applicable to studying the unstable electrodeposition of lithium on other substrates, including Li metal.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Studies on Charging Lithium-Ion Cells at Low Temperatures
Fan, J., & Tan, S. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2190029 · Cited by 211
Cited by
An Outlook on Lithium Ion Battery Technology
Manthiram, A. (2017) · ACS Central Science · doi:10.1021/acscentsci.7b00288 · Cited by 1,771
Self-citationHigh-nickel layered oxide cathodes for lithium-based automotive batteries
Li, W., Erickson, E. M., & Manthiram, A. (2020) · Nature Energy · doi:10.1038/s41560-019-0513-0 · Cited by 1,754
Self-citationSodium Metal Anodes: Emerging Solutions to Dendrite Growth
Lee, B., Paek, E., Mitlin, D., & Lee, S. W. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00642 · Cited by 940
Physicochemical Concepts of the Lithium Metal Anode in Solid-State Batteries
Krauskopf, T., Richter, F. H., Zeier, W. G., & Janek, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00431 · Cited by 892
Jiang, M., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202103005 · Cited by 720
Metadata
- Authors
- Li, W., Kim, U.-H., Dolocan, A., Sun, Y.-K., & Manthiram, A.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-05-16
- Volume
- 11
- Issue
- 6
- Pages
- 5853-5863
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2612843351
- Cited by
- 197
- References
- 2
- FWCI
- 6.94
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Formation and Inhibition of Metallic Lithium Microstructures in Lithium Batteries Driven by Chemical Crossover. https://app.cochat.ai/papers/10.1021/acsnano.7b01494
- The paper
- Li, W., Kim, U.-H., Dolocan, A., Sun, Y.-K., & Manthiram, A. (2017). Formation and Inhibition of Metallic Lithium Microstructures in Lithium Batteries Driven by Chemical Crossover. ACS Nano. https://doi.org/10.1021/acsnano.7b01494
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.