The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Lithium Batteries with Nearly Maximum Metal Storage
Open accessAbstract
Abstract The drive for significant advancement in battery capacity and energy density inspired a revisit to the use of Li metal anodes. We report the use of a seamless graphene–carbon nanotube (GCNT) electrode to reversibly store Li metal with complete dendrite formation suppression. The GCNT-Li capacity of 3351 mAh g–1GCNT-Li approaches that of bare Li metal (3861 mAh g–1Li), indicating the low contributing mass of GCNT, while yielding a practical areal capacity up to 4 mAh cm–2 and cycle stability. A full battery based on GCNT-Li/sulfurized carbon (SC) is demonstrated with high energy density (752 Wh kg–1 total electrodes, where total electrodes = GCNT-Li + SC + binder), high areal capacity (2 mAh cm–2), and cyclability (80% retention at >500 cycles) and is free of Li polysulfides and dendrites that would cause severe capacity fade.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Cited by
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Lithium Metal Anodes with Nonaqueous Electrolytes
Zhang, J.-G., Xu, W., Xiao, J., Cao, X., & Liu, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00275 · Cited by 730
Self-smoothing anode for achieving high-energy lithium metal batteries under realistic conditions
Niu, C., Pan, H., Xu, W., Xiao, J., Zhang, J.-G., Luo, L., Wang, C., Mei, D., Meng, J., Wang, X., et al. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0427-9 · Cited by 589
Rao, R., Pint, C. L., Islam, A. E., Weatherup, R. S., Hofmann, S., Meshot, E. R., Wu, F., Zhou, C., Dee, N., Amama, P. B., et al. (2018) · ACS Nano · doi:10.1021/acsnano.8b06511 · Cited by 588
Self-citationLiu, L., Yin, Y., Li, J., Wang, S., Guo, Y., & Wan, L. (2018) · Advanced Materials · doi:10.1002/adma.201706216 · Cited by 538
Metadata
- Authors
- Raji, A.-R. O., Villegas Salvatierra, R., Kim, N. D., Fan, X., Li, Y., Silva, G. A. L., Sha, J., & Tour, J. M.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-05-16
- Volume
- 11
- Issue
- 6
- Pages
- 6362-6369
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2616254355
- Cited by
- 196
- References
- 2
- FWCI
- 13.98
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.