The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Polycrystalline SnSe with Extraordinary Thermoelectric Property via Nanoporous Design
Abstract
Abstract Nanoporous materials possess low thermal conductivities derived from effective phonon scatterings at grain boundaries and interfaces. Thus nanoporous thermoelectric materials have full potential to improve their thermoelectric performance. Here we report a high ZT of 1.7 ± 0.2 at 823 K in p-type nanoporous polycrystalline SnSe fabricated via a facile solvothermal route. We successfully induce indium selenides (InSey) nanoprecipitates in the as-synthesized SnSe matrix of single-crystal microplates, and the nanopores are achieved via the decompositions of these nanoprecipitates during the sintering process. Through detailed structural and chemical characterizations, it is found that the extralow thermal conductivity of 0.24 W m–1 K–1 caused by the effective phonon blocking and scattering at induced nanopores, interfaces, and grain boundaries and the high power factor of 5.06 μW cm–1 K–2 are derived from a well-tuned hole carrier concentration of 1.34 × 1019 cm–3via inducing high Sn vacancies by self-doping, contributing to high ZTs. This study fills the gap of achieving nanoporous SnSe and provides an avenue in achieving high-performance thermoelectric properties of materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kirkpatrick, S. (1973) · Reviews of Modern Physics · doi:10.1103/revmodphys.45.574 · Cited by 5,260
Cited by
Advanced Thermoelectric Design: From Materials and Structures to Devices
Shi, X.-L., Zou, J., & Chen, Z.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00026 · Cited by 2,524
Self-citationFlexible Thermoelectric Materials and Generators: Challenges and Innovations
Wang, Y., Yang, L., Shi, X., Shi, X., Chen, L., Dargusch, M. S., Zou, J., & Chen, Z. (2019) · Advanced Materials · doi:10.1002/adma.201807916 · Cited by 751
Self-citationHarvesting waste heat with flexible Bi2Te3 thermoelectric thin film
Zheng, Z.-H., Shi, X.-L., Ao, D.-W., Liu, W.-D., Li, M., Kou, L.-Z., Chen, Y.-X., Li, F., Wei, M., Liang, G.-X., et al. (2022) · Nature Sustainability · doi:10.1038/s41893-022-01003-6 · Cited by 480
Self-citationFlexible thermoelectric materials and devices: From materials to applications
Zhang, L., Shi, X.-L., Yang, Y.-L., & Chen, Z.-G. (2021) · Materials Today · doi:10.1016/j.mattod.2021.02.016 · Cited by 454
Self-citationReview of current high-ZT thermoelectric materials
Wei, J., Yang, L., Ma, Z., Song, P., Zhang, M., Ma, J., Yang, F., & Wang, X. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-04949-0 · Cited by 413
Metadata
- Authors
- Shi, X., Wu, A., Liu, W., Moshwan, R., Wang, Y., Chen, Z.-G., & Zou, J.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-10-15
- Volume
- 12
- Issue
- 11
- Pages
- 11417-11425
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2896841194
- Cited by
- 190
- References
- 1
- FWCI
- 7.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.