The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Nano/Microstructured Silicon–Graphite Composite Anode for High-Energy-Density Li-Ion Battery
Abstract
With the ever-increasing demand for lithium-ion batteries (LIBs) with higher energy density, tremendous attention has been paid to design various silicon-active materials as alternative electrodes due to their high theoretical capacity (ca. 3579 mAh g –1 ). However, totally replacing the commercially utilized graphite with silicon is still insurmountable owing to bottlenecks such as low electrode loading and insufficient areal capacity. Thus, in this study, we turn back to enhanced graphite electrode through the cooperation of modified silicon via a facile and scalable blending process. The modified nano/microstructured silicon with boron doping and carbon nanotube wedging (B–Si/CNT) can provide improved stability (88.2% retention after 200 cycles at 2000 mA g –1 ) and high reversible capacity (∼2426 mAh g –1 ), whereas the graphite can act as a tough framework for high loading. Owing to the synergistic effect, the resultant B–Si/CNT–graphite composite (B–Si/CNT@G) shows a high areal capacity of 5.2 mAh cm –2 and excellent cycle retention of 83.4% over 100 cycles, even with ultrahigh active mass loading of 11.2 mg cm –2,which could significantly surpass the commercially used graphite electrode. Notably, the composite also exhibits impressive application in Li-ion full battery using 2 mol % Al-doped full-concentration-gradient Li[Ni 0.76 Co 0.09 Mn 0.15 ]O 2 (Al2-FCG76) as the cathode with excellent capacity retention of 82.5% even after 300 cycles and an outstanding energy density (8.0 mWh cm –2 ) based on the large mass loading of the cathode (12.0 mg cm –2 ).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High-performance lithium battery anodes using silicon nanowires
Chan, C. K., Peng, H., Liu, G., McIlwrath, K., Zhang, X. F., Huggins, R. A., & Cui, Y. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.411 · Cited by 6,683
High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance
Augustyn, V., Come, J., Lowe, M. A., Kim, J. W., Taberna, P.-L., Tolbert, S. H., Abruña, H. D., Simon, P., & Dunn, B. (2013) · Nature Materials · doi:10.1038/nmat3601 · Cited by 5,177
Lithium-ion batteries. A look into the future
Scrosati, B., Hassoun, J., & Sun, Y.-K. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01388b · Cited by 2,595
Self-citationHigh-performance lithium-ion anodes using a hierarchical bottom-up approach
Magasinski, A., Dixon, P., Hertzberg, B., Kvit, A., Ayala, J., & Yushin, G. (2010) · Nature Materials · doi:10.1038/nmat2725 · Cited by 2,044
High-energy cathode material for long-life and safe lithium batteries
Sun, Y.-K., Myung, S.-T., Park, B.-C., Prakash, J., Belharouak, I., & Amine, K. (2009) · Nature Materials · doi:10.1038/nmat2418 · Cited by 1,519
Self-citationNanostructured high-energy cathode materials for advanced lithium batteries
Sun, Y.-K., Chen, Z., Noh, H.-J., Lee, D.-J., Jung, H.-G., Ren, Y., Wang, S., Yoon, C. S., Myung, S.-T., & Amine, K. (2012) · Nature Materials · doi:10.1038/nmat3435 · Cited by 1,093
Self-citationScalable synthesis of silicon-nanolayer-embedded graphite for high-energy lithium-ion batteries
Ko, M., Chae, S., Ma, J., Kim, N., Lee, H.-W., Cui, Y., & Cho, J. (2016) · Nature Energy · doi:10.1038/nenergy.2016.113 · Cited by 771
Determination of the diffusion coefficient of lithium ions in nano-Si
Ding, N., Xu, J., Yao, Y. X., Wegner, G., Fang, X., Chen, C. H., & Lieberwirth, I. (2009) · Solid State Ionics · doi:10.1016/j.ssi.2008.12.015 · Cited by 621
Rice husk-derived hard carbons as high-performance anode materials for sodium-ion batteries
Wang, Q., Zhu, X., Liu, Y., Fang, Y., Zhou, X., & Bao, J. (2018) · Carbon · doi:10.1016/j.carbon.2017.11.054 · Cited by 492
Lin, D., Lu, Z., Hsu, P.-C., Lee, H. R., Liu, N., Zhao, J., Wang, H., Liu, C., & Cui, Y. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01363a · Cited by 462
Galvanostatic Intermittent Titration Technique for Phase-Transformation Electrodes
Zhu, Y., & Wang, C. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp9113333 · Cited by 421
Matos, J. R., Kruk, M., Mercuri, L. P., Jaroniec, M., Zhao, L., Kamiyama, T., Terasaki, O., Pinnavaia, T. J., & Liu, Y. (2003) · Journal of the American Chemical Society · doi:10.1021/ja0283347 · Cited by 377
Lee, J. H., Yoon, C. S., Hwang, J.-Y., Kim, S.-J., Maglia, F., Lamp, P., Myung, S.-T., & Sun, Y.-K. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01134a · Cited by 310
Self-citationVacuum distillation derived 3D porous current collector for stable lithium–metal batteries
An, Y., Fei, H., Zeng, G., Xu, X., Ci, L., Xi, B., Xiong, S., Feng, J., & Qian, Y. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.03.036 · Cited by 258
Micron-Sized Nanoporous Antimony with Tunable Porosity for High-Performance Potassium-Ion Batteries
An, Y., Tian, Y., Ci, L., Xiong, S. L., Feng, J., & Qian, Y. (2018) · ACS Nano · doi:10.1021/acsnano.8b08740 · Cited by 257
High‐Performance Hybrid Supercapacitor Enabled by a High‐Rate Si‐based Anode
Yi, R., Chen, S., Song, J., Gordin, M. L., Manivannan, A., & Wang, D. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201402398 · Cited by 246
Kim, U.-H., Myung, S.-T., Yoon, C. S., & Sun, Y.-K. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00613 · Cited by 203
Self-citationRemedying Defects in Carbon Nitride To Improve both Photooxidation and H2 Generation Efficiencies
Wu, W., Zhang, J., Fan, W., Li, Z., Wang, L., Li, X., Wang, Y., Wang, R., Zheng, J., Wu, M., et al. (2016) · ACS Catalysis · doi:10.1021/acscatal.6b00879 · Cited by 162
Jeong, M.-G., Du, H. L., Islam, M., Lee, J. K., Sun, Y.-K., & Jung, H.-G. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b02433 · Cited by 162
Self-citationKim, S., Jeong, Y. K., Wang, Y., Lee, H., & Choi, J. W. (2018) · Advanced Materials · doi:10.1002/adma.201707594 · Cited by 154
Chae, C., Noh, H.-J., Lee, J. K., Scrosati, B., & Sun, Y. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303766 · Cited by 152
Self-citationSohn, M., Lee, D. G., Park, H., Park, C., Choi, J., & Kim, H. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800855 · Cited by 141
Zhu, S., Zhou, J., Guan, Y., Cai, W., Zhao, Y., Zhu, Y., Zhu, L., Zhu, Y., & Qian, Y. (2018) · Small · doi:10.1002/smll.201802457 · Cited by 140
Zhang, J., Zhang, L., Zhang, L., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00457h · Cited by 47
Guo, D., Han, F., & Lu, A. (2014) · Chemistry - A European Journal · doi:10.1002/chem.201405068 · Cited by 39
Cited by
Li, P., Kim, H., Myung, S.-T., & Sun, Y.-K. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.11.028 · Cited by 535
Self-citationRecent Advances in Silicon‐Based Electrodes: From Fundamental Research toward Practical Applications
Ge, M., Cao, C., Biesold, G. M., Sewell, C. D., Hao, S., Huang, J., Zhang, W., Lai, Y., & Lin, Z. (2021) · Advanced Materials · doi:10.1002/adma.202004577 · Cited by 524
Eshetu, G. G., Zhang, H., Judez, X., Adenusi, H., Armand, M., Passerini, S., & Figgemeier, E. (2021) · Nature Communications · doi:10.1038/s41467-021-25334-8 · Cited by 485
Wu, J., Cao, Y., Zhao, H., Mao, J., & Guo, Z. (2019) · Carbon Energy · doi:10.1002/cey2.2 · Cited by 419
Zhang, C., Wang, F., Han, J., Bai, S., Tan, J., Liu, J., & Li, F. (2021) · Small Structures · doi:10.1002/sstr.202100009 · Cited by 300
Metadata
- Authors
- Li, P., Hwang, J.-Y., & Sun, Y.-K.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-02-15
- Volume
- 13
- Issue
- 2
- Pages
- 2624-2633
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2911313159
- Cited by
- 412
- References
- 25
- FWCI
- 21.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.